23a 4 rotor kit

silverfdturbo6port · 10-05-2013, 11:47 PM

Well I recently picked this up from a member on here and I have decided to sell it and finish my 20b and buy some things to make my shop stronger.
My original plan was to build this into a 1000+ ho P port turbo monster and place it into the rx3 and still will if this does not sell.
This is a Jeff Bruce built 23a 4 rotor kit. Yes a 12a based 4 rotor. This is brand new never been fired. It was put together previously but never ran.
This is the guy who builds and supplies most if not all company's selling 4 rotor
Its build to take any punishment. Fully balanced for 83-85 12a rotors.
The side plates are used irons in spec and rechecked by Dan Atkins and are machined for the bearing mod.
This is not much longer than a 20b which makes it really neat. You can fit this into almost anything.
The only thing I noticed out of ordinary is little spot on the corner of a lobe that is flat. Nothing to worry about at all it happened when Jeff Bruce built it from my understanding. Dan Atkins looked over this after it arrived and is nothing to worry about and will not effect anything. I too build rotarys and I knew right away its nothing to worry about otherwise I would not have bought it. I just want to be clear and honest so no surprises.
Like I said this kit is brand new. When I say kit that means its everything you need to make a 4 rotor. You will need 12a housings, rotors, side plates and a oil system.
This is a rare opportunity for a very rare motor. Scoot sports has a p ported 23a in japan and there is or was a 23a in a fd in the states but was a side port motor.

The modded side plates are gsl se so they have the injector bosses which is kinda cool also.
The side plates are also port matched 74 spec ports.
I have r5 side plates i will also sell and I also have 4 gsl-se housings in great shape that cam be machined down at goopy to run as 12a as gsl-se has the small exhaust inserts and are the only 13b housings you can do this to from my understanding with Jhonathan at goopy.
This is also on the other forum as well.

I take only paypal and my feedback is steller. Im mostly on the rx7club and thats where I have all my feedback. I have done 5k+ in single transactions with not even a hiccup.
I will also trade for 20b engines or parts also.
Im asking $8000 shipped to us states excluding Hawaii and Alaska.

banzaitoyota · 10-06-2013, 11:26 AM

Damn! Smoking deal

silverfdturbo6port · 10-08-2013, 07:36 PM

Like he said killer deal!

the spyder · 10-08-2013, 08:23 PM

Awesome kit.

silverfdturbo6port · 10-08-2013, 11:47 PM

thanks

silverfdturbo6port · 10-13-2013, 06:46 PM

Nobody interested?

RICE RACING · 10-14-2013, 04:15 AM

I can vouch for Jeff Bruces work, I was one of the first to buy a center bearing 13B kit from him over 10 years ago now.

If you were not in US I would give you a low ball offer for the 4 rotor set up

FREE BUMP for you.

silverfdturbo6port · 10-15-2013, 09:53 PM

Thanks Peter.
I will let you low ball me. Worst I can do is say no or at least know my options.

silverfdturbo6port · 10-20-2013, 07:20 PM

bump

silverfdturbo6port · 10-20-2013, 11:09 PM

price drop 7500$ shipped

silverfdturbo6port · 11-03-2013, 08:31 PM

bump $7500 is a killer deal

silverfdturbo6port · 11-19-2013, 10:24 PM

Still for sale

lt1_fd3s · 11-19-2013, 10:38 PM

shame you won't take a straight trade for an A-series 20B...

chibikougan · 11-19-2013, 11:08 PM

Bump

silverfdturbo6port · 11-20-2013, 12:14 AM

ok

10-05-2013, 11:47 PM	#1
silverfdturbo6port 500hp club Join Date: Feb 2011 Location: spokane iTrader: (0) Posts: 79 Rep Power: 14	23a 4 rotor kit Well I recently picked this up from a member on here and I have decided to sell it and finish my 20b and buy some things to make my shop stronger. My original plan was to build this into a 1000+ ho P port turbo monster and place it into the rx3 and still will if this does not sell. This is a Jeff Bruce built 23a 4 rotor kit. Yes a 12a based 4 rotor. This is brand new never been fired. It was put together previously but never ran. This is the guy who builds and supplies most if not all company's selling 4 rotor Its build to take any punishment. Fully balanced for 83-85 12a rotors. The side plates are used irons in spec and rechecked by Dan Atkins and are machined for the bearing mod. This is not much longer than a 20b which makes it really neat. You can fit this into almost anything. The only thing I noticed out of ordinary is little spot on the corner of a lobe that is flat. Nothing to worry about at all it happened when Jeff Bruce built it from my understanding. Dan Atkins looked over this after it arrived and is nothing to worry about and will not effect anything. I too build rotarys and I knew right away its nothing to worry about otherwise I would not have bought it. I just want to be clear and honest so no surprises. Like I said this kit is brand new. When I say kit that means its everything you need to make a 4 rotor. You will need 12a housings, rotors, side plates and a oil system. This is a rare opportunity for a very rare motor. Scoot sports has a p ported 23a in japan and there is or was a 23a in a fd in the states but was a side port motor. The modded side plates are gsl se so they have the injector bosses which is kinda cool also. The side plates are also port matched 74 spec ports. I have r5 side plates i will also sell and I also have 4 gsl-se housings in great shape that cam be machined down at goopy to run as 12a as gsl-se has the small exhaust inserts and are the only 13b housings you can do this to from my understanding with Jhonathan at goopy. This is also on the other forum as well. I take only paypal and my feedback is steller. Im mostly on the rx7club and thats where I have all my feedback. I have done 5k+ in single transactions with not even a hiccup. I will also trade for 20b engines or parts also. Im asking $8000 shipped to us states excluding Hawaii and Alaska. __________________ 500hp AEM EMS RotaryAutomotive street ported Aviation sealed 13b-rew 20B 20BEEST FD 23A 4 rotor Long gone 72 rx3 drag machine Last edited by silverfdturbo6port; 11-03-2013 at 11:21 PM.. Reason: update

10-06-2013, 11:26 AM	#2
banzaitoyota Rotary Fanatic Join Date: Feb 2008 iTrader: (0) Posts: 201 Rep Power: 17	Damn! Smoking deal __________________ My deuce

10-08-2013, 07:36 PM	#3
silverfdturbo6port 500hp club Join Date: Feb 2011 Location: spokane iTrader: (0) Posts: 79 Rep Power: 14	Like he said killer deal! __________________ 500hp AEM EMS RotaryAutomotive street ported Aviation sealed 13b-rew 20B 20BEEST FD 23A 4 rotor Long gone 72 rx3 drag machine

10-08-2013, 11:47 PM	#5
silverfdturbo6port 500hp club Join Date: Feb 2011 Location: spokane iTrader: (0) Posts: 79 Rep Power: 14	thanks __________________ 500hp AEM EMS RotaryAutomotive street ported Aviation sealed 13b-rew 20B 20BEEST FD 23A 4 rotor Long gone 72 rx3 drag machine

10-13-2013, 06:46 PM	#6
silverfdturbo6port 500hp club Join Date: Feb 2011 Location: spokane iTrader: (0) Posts: 79 Rep Power: 14	Nobody interested? __________________ 500hp AEM EMS RotaryAutomotive street ported Aviation sealed 13b-rew 20B 20BEEST FD 23A 4 rotor Long gone 72 rx3 drag machine

10-08-2013, 08:23 PM	#4
the spyder Rotary Fan in Training Join Date: Jun 2008 iTrader: (1) Posts: 38 Rep Power: 0	Awesome kit.

10-14-2013, 04:15 AM	#7
RICE RACING Don Mega Join Date: Dec 2008 Location: Utopia iTrader: (0) Posts: 1,688 Rep Power: 17	I can vouch for Jeff Bruces work, I was one of the first to buy a center bearing 13B kit from him over 10 years ago now. If you were not in US I would give you a low ball offer for the 4 rotor set up FREE BUMP for you. __________________ www.riceracing.com.au Worlds best Apex Seals Coil on Plug Water Injection ECU Calibration

10-15-2013, 09:53 PM	#8
silverfdturbo6port 500hp club Join Date: Feb 2011 Location: spokane iTrader: (0) Posts: 79 Rep Power: 14	Thanks Peter. I will let you low ball me. Worst I can do is say no or at least know my options. __________________ 500hp AEM EMS RotaryAutomotive street ported Aviation sealed 13b-rew 20B 20BEEST FD 23A 4 rotor Long gone 72 rx3 drag machine

10-20-2013, 07:20 PM	#9
silverfdturbo6port 500hp club Join Date: Feb 2011 Location: spokane iTrader: (0) Posts: 79 Rep Power: 14	bump __________________ 500hp AEM EMS RotaryAutomotive street ported Aviation sealed 13b-rew 20B 20BEEST FD 23A 4 rotor Long gone 72 rx3 drag machine

10-20-2013, 11:09 PM	#10
silverfdturbo6port 500hp club Join Date: Feb 2011 Location: spokane iTrader: (0) Posts: 79 Rep Power: 14	price drop 7500$ shipped __________________ 500hp AEM EMS RotaryAutomotive street ported Aviation sealed 13b-rew 20B 20BEEST FD 23A 4 rotor Long gone 72 rx3 drag machine

11-03-2013, 08:31 PM	#11
silverfdturbo6port 500hp club Join Date: Feb 2011 Location: spokane iTrader: (0) Posts: 79 Rep Power: 14	bump $7500 is a killer deal __________________ 500hp AEM EMS RotaryAutomotive street ported Aviation sealed 13b-rew 20B 20BEEST FD 23A 4 rotor Long gone 72 rx3 drag machine

11-19-2013, 10:24 PM	#12
silverfdturbo6port 500hp club Join Date: Feb 2011 Location: spokane iTrader: (0) Posts: 79 Rep Power: 14	Still for sale __________________ 500hp AEM EMS RotaryAutomotive street ported Aviation sealed 13b-rew 20B 20BEEST FD 23A 4 rotor Long gone 72 rx3 drag machine Last edited by silverfdturbo6port; 11-20-2013 at 02:57 AM..

11-19-2013, 10:38 PM	#13
lt1_fd3s WNC Tour Guide Join Date: Feb 2008 Location: WNC iTrader: (3) Posts: 780 Rep Power: 17	shame you won't take a straight trade for an A-series 20B... __________________ WNC Tour Guide - Including the Tail of the Dragon - PM for details

11-20-2013, 12:14 AM	#15
silverfdturbo6port 500hp club Join Date: Feb 2011 Location: spokane iTrader: (0) Posts: 79 Rep Power: 14	ok __________________ 500hp AEM EMS RotaryAutomotive street ported Aviation sealed 13b-rew 20B 20BEEST FD 23A 4 rotor Long gone 72 rx3 drag machine Last edited by silverfdturbo6port; 11-20-2013 at 02:57 AM..