AutoEXE 20b GTX-R 4294 DrySump RE-A ADGT Widebody

MotoTek · 01-15-2012, 02:44 PM

I think my thread title sums it up.

Just thought I'd share my collection of parts with you guys, hopefully someday it will become a running FD. haha

AutoEXE 20b

Manual Steering Rack

New Interior

RE-A ADGT Widebody

Raceshop Rollbar

99 Spec Turn Signals

Tri-Point Front and Rear Swaybars

Apexi GT Spec Exhaust

GTX-R 4294 w/ Tial Turbine Housing

Zeal Super Functions

RE-Amemiya ADGT Carbon Fiber Bonnet

'02 Cobra 8.8 IRS Diff w/ 4.10 gearing
MAZDA 1993-1995 RX-7 (FD) Pro-Level Axle / Hub Kit
FD cobra 8.8 cradle

FEED gauge Cluster

Force13b · 01-16-2012, 12:21 PM

Where's the car they go in?

RETed · 01-16-2012, 04:25 PM

Quote:

Originally Posted by MotoTek

AutoEXE 20b

I don't understand this part...
The motor looks pretty stock to me.
Did you buy it from AutoEXE?
Or is the engine hiding a bunch of goodies inside?

-Ted

MotoTek · 01-16-2012, 11:47 PM

Force13b, I noticed I didn't post pics of the car after I posted. Whoops. haha Here it is through some stages before the tear down & build started.

When I first got her.

Installed FEED kit + new VR paint.

Here she is 2-3 months ago. Sitting comfortably in the garage.
I started to install the RE-Amemiya ADGT kit and re-paint the car black, but really didn't like the fact that the door jams and engine bay were a different color. So, that's when I tore her apart and began the never ending part collection process. haha

The plan now is to start fresh. Media blast the entire car. Quiet Coat the interior, and POR the underside.
I'm also no longer painting it black, but will leave the new color a secret until it's finished.

Ted, AutoEXE used to build new 3 rotors, but have since stopped. I purchased this from Japan2LA who was holding it for himself to build his own 3 rotor one day.

AutoEXE, did the following:
Built from ALL BRAND NEW PARTS
Brand New C and D code spec 4mm thicker dowel pin land side plates
Brand New OEM mazda E-shaft
Brand New LIM, UIM,TB, ELbow
Brand NEW Twins
Brand NEW FD3S Rotor housings (Built in Japan after 20B rotor housing NLA)
Brand New Staygears
Brand New rotors
Brand New oil pan and pick up tube
ETC... ETC.. ETC..
Plus all the Autoexe upgrades internally (porting)

speedjunkie · 01-17-2012, 01:31 PM

Did you hit the lottery or something? Holy shit lol. The new interior probably cost as much as the 20B lol.

MotoTek · 01-18-2012, 01:00 AM

No lottery, unfortunately.

Just a passion for doing things right. My girlfriend would say it's an obsession though. Thankfully, she has her own "obsession" that I support her through. It equals out.

speedjunkie · 01-18-2012, 02:18 AM

I know all about obsession, I self-diagnosed that for myself already haha. Admitting you have a problem is the first step, blah blah blah LOL. Screw that, just hand me that wrench. lol

RETed · 01-19-2012, 04:56 AM

Quote:

Originally Posted by MotoTek

Ted, AutoEXE used to build new 3 rotors, but have since stopped. I purchased this from Japan2LA who was holding it for himself to build his own 3 rotor one day.

AutoEXE, did the following:
Built from ALL BRAND NEW PARTS
Brand New C and D code spec 4mm thicker dowel pin land side plates
Brand New OEM mazda E-shaft
Brand New LIM, UIM,TB, ELbow
Brand NEW Twins
Brand NEW FD3S Rotor housings (Built in Japan after 20B rotor housing NLA)
Brand New Staygears
Brand New rotors
Brand New oil pan and pick up tube
ETC... ETC.. ETC..
Plus all the Autoexe upgrades internally (porting)

Wow, that is one helluva find.
Like speedjunkie already said...I'd be scared to look at the numbers on the receipts for these items!
Good luck with the build!

-Ted

MotoTek · 08-04-2012, 04:42 PM

Eric & Ted, I justify it by telling myself "At least I'm not spending the money on liquor or drugs." haha Mostly though, the build has given me a lot of experience with cars that my future employers will look for. I plan on finding a job in the automotive industry when I graduate next June, so this will only help me.

Got some more stuff in from Japan & from the polishers!

FEED Halogen Turn Lamps

RE-Amemiya Scuff Plates

Attain Rear Bumper Guard

Super*Now Sway Bar Mounts

R-Magic Skull Rotor Sticker
(I've always wanted this)

Test fitting the turn lamps on my RE-Amemiya 05 ADGT full carbon front bumper.

Test fitting the lens covers.

GTX4294R Compressor Cover

Dry-sump Front cover

MotoTek · 08-04-2012, 05:01 PM

I also purchased a full set of pillow-ball suspension bushings from Super*Now over in Japan, which will have to wait to be installed until I get my next purchase from Summit. After that all that will be needed is electronics, motor build, body work. =D

I got a few quotes for media blasting all the control arms, and having the bushings pressed in for me, but it makes a lot more sense to just do it myself, even though I probably won't use the shop equipment afterwards unless I build another car after this. hmmm. Maybe a MKIV Supra or NSX.

speedjunkie · 08-06-2012, 02:14 PM

Wow, they did a GREAT job on those polished pieces.

[200[ · 08-06-2012, 07:58 PM

excellent choice with the transmission, rated at 700 ft / lb - very strong!

docmar · 08-28-2012, 05:51 AM

Very nice project.
So impressed....
Tell us....how much did you win on the lottery.???

MotoTek · 08-29-2012, 06:55 PM

Thank you, I appreciate it. If I won the lottery though, she'd have been done a long time ago.

docmar · 08-31-2012, 06:47 AM

Man the most impressive project i'v ever seen.
Joking about the lottery.
Please keep us informed about any progress.

01-15-2012, 02:44 PM	#1
MotoTek Always Under Construction Join Date: Mar 2008 Location: La Playa, CA iTrader: (1) Posts: 302 Rep Power: 17	AutoEXE 20b GTX-R 4294 DrySump RE-A ADGT Widebody I think my thread title sums it up. Just thought I'd share my collection of parts with you guys, hopefully someday it will become a running FD. haha AutoEXE 20b Manual Steering Rack New Interior RE-A ADGT Widebody Raceshop Rollbar 99 Spec Turn Signals Tri-Point Front and Rear Swaybars Apexi GT Spec Exhaust GTX-R 4294 w/ Tial Turbine Housing Zeal Super Functions RE-Amemiya ADGT Carbon Fiber Bonnet '02 Cobra 8.8 IRS Diff w/ 4.10 gearing MAZDA 1993-1995 RX-7 (FD) Pro-Level Axle / Hub Kit FD cobra 8.8 cradle FEED gauge Cluster __________________ BLACKADDE™ \| ADGT RX7 \|

01-16-2012, 11:47 PM	#4
MotoTek Always Under Construction Join Date: Mar 2008 Location: La Playa, CA iTrader: (1) Posts: 302 Rep Power: 17	Force13b, I noticed I didn't post pics of the car after I posted. Whoops. haha Here it is through some stages before the tear down & build started. When I first got her. Installed FEED kit + new VR paint. Here she is 2-3 months ago. Sitting comfortably in the garage. I started to install the RE-Amemiya ADGT kit and re-paint the car black, but really didn't like the fact that the door jams and engine bay were a different color. So, that's when I tore her apart and began the never ending part collection process. haha The plan now is to start fresh. Media blast the entire car. Quiet Coat the interior, and POR the underside. I'm also no longer painting it black, but will leave the new color a secret until it's finished. Ted, AutoEXE used to build new 3 rotors, but have since stopped. I purchased this from Japan2LA who was holding it for himself to build his own 3 rotor one day. AutoEXE, did the following: Built from ALL BRAND NEW PARTS Brand New C and D code spec 4mm thicker dowel pin land side plates Brand New OEM mazda E-shaft Brand New LIM, UIM,TB, ELbow Brand NEW Twins Brand NEW FD3S Rotor housings (Built in Japan after 20B rotor housing NLA) Brand New Staygears Brand New rotors Brand New oil pan and pick up tube ETC... ETC.. ETC.. Plus all the Autoexe upgrades internally (porting) __________________ BLACKADDE™ \| ADGT RX7 \| Last edited by MotoTek; 01-16-2012 at 11:54 PM..

01-18-2012, 01:00 AM	#6
MotoTek Always Under Construction Join Date: Mar 2008 Location: La Playa, CA iTrader: (1) Posts: 302 Rep Power: 17	No lottery, unfortunately. Just a passion for doing things right. My girlfriend would say it's an obsession though. Thankfully, she has her own "obsession" that I support her through. It equals out. __________________ BLACKADDE™ \| ADGT RX7 \|

08-04-2012, 04:42 PM	#9
MotoTek Always Under Construction Join Date: Mar 2008 Location: La Playa, CA iTrader: (1) Posts: 302 Rep Power: 17	Eric & Ted, I justify it by telling myself "At least I'm not spending the money on liquor or drugs." haha Mostly though, the build has given me a lot of experience with cars that my future employers will look for. I plan on finding a job in the automotive industry when I graduate next June, so this will only help me. Got some more stuff in from Japan & from the polishers! FEED Halogen Turn Lamps RE-Amemiya Scuff Plates Attain Rear Bumper Guard *SuperNow Sway Bar Mounts R-Magic Skull Rotor Sticker (I've always wanted this) Test fitting the turn lamps on my RE-Amemiya 05 ADGT full carbon front bumper. Test fitting the lens covers. GTX4294R Compressor Cover Dry-sump Front cover __________________ BLACKADDE™ \| ADGT RX7 \|** Last edited by MotoTek; 08-04-2012 at 05:13 PM..

08-04-2012, 05:01 PM	#10
MotoTek Always Under Construction Join Date: Mar 2008 Location: La Playa, CA iTrader: (1) Posts: 302 Rep Power: 17	I also purchased a full set of pillow-ball suspension bushings from SuperNow over in Japan, which will have to wait to be installed until I get my next purchase from Summit. After that all that will be needed is electronics, motor build, body work. =D I got a few quotes for media blasting all the control arms, and having the bushings pressed in for me, but it makes a lot more sense to just do it myself, even though I probably won't use the shop equipment afterwards unless I build another car after this. hmmm. Maybe a MKIV Supra or NSX. __________________ BLACKADDE™ \| ADGT RX7 \|*

01-16-2012, 12:21 PM	#2
Force13b cxxxx\|::::::::::::> Join Date: Nov 2009 iTrader: (1) Posts: 315 Rep Power: 16	Where's the car they go in?

01-17-2012, 01:31 PM	#5
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO iTrader: (1) Posts: 2,089 Rep Power: 19	Did you hit the lottery or something? Holy shit lol. The new interior probably cost as much as the 20B lol.

01-18-2012, 02:18 AM	#7
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO iTrader: (1) Posts: 2,089 Rep Power: 19	I know all about obsession, I self-diagnosed that for myself already haha. Admitting you have a problem is the first step, blah blah blah LOL. Screw that, just hand me that wrench. lol

08-06-2012, 02:14 PM	#11
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO iTrader: (1) Posts: 2,089 Rep Power: 19	Wow, they did a GREAT job on those polished pieces.

08-06-2012, 07:58 PM	#12
[200[ The Newbie Join Date: Feb 2011 iTrader: (0) Posts: 10 Rep Power: 0	excellent choice with the transmission, rated at 700 ft / lb - very strong!

08-28-2012, 05:51 AM	#13
docmar need more power... Join Date: Nov 2008 iTrader: (0) Posts: 13 Rep Power: 0	Very nice project. So impressed.... Tell us....how much did you win on the lottery.??? __________________ Going for 736kw... Most powerful rx7-fd in Greece. Tuned by docmar. http://www.youtube.com/watch?v=Cqo5u...2&feature=plcp http://www.youtube.com/watch?v=Q4wed...mvBqVveQ0k7U4Q http://www.youtube.com/watch?v=lDOqS...9&feature=plcp Last edited by docmar; 08-28-2012 at 06:36 AM..

08-29-2012, 06:55 PM	#14
MotoTek Always Under Construction Join Date: Mar 2008 Location: La Playa, CA iTrader: (1) Posts: 302 Rep Power: 17	Thank you, I appreciate it. If I won the lottery though, she'd have been done a long time ago. __________________ BLACKADDE™ \| ADGT RX7 \|

08-31-2012, 06:47 AM	#15
docmar need more power... Join Date: Nov 2008 iTrader: (0) Posts: 13 Rep Power: 0	Man the most impressive project i'v ever seen. Joking about the lottery. Please keep us informed about any progress. __________________ Going for 736kw... Most powerful rx7-fd in Greece. Tuned by docmar. http://www.youtube.com/watch?v=Cqo5u...2&feature=plcp http://www.youtube.com/watch?v=Q4wed...mvBqVveQ0k7U4Q http://www.youtube.com/watch?v=lDOqS...9&feature=plcp