FS

RotorDad · 08-28-2011, 05:34 PM

Well now has come the time for me to sell the Spec V. I really would like to keep the car, but I have been laid off for some time now & have no choice. Okay the car is a 2002 Sentra SER Spec V (6spd, QR25DE), it's white. The car has 73k on the chassis, but the motor was replaced by Pohanka Nissan of Fredericksburg @ around 50k. As soon as the motor was replaced out went the factory header for a heat wrapped DC Sports race header & cat delete. It has an AEM CAI with the Dry Flo filter which has been heat wrapped. I have the factory wheels/no tires that will go with the car. On the car will be the choice of the buyer 17" Motegi MR7's or 18" Racing Hart C5 EVO's. Both sets of wheels have two good tires & two bad tires. Oil has been regularly changed as well as a 50/50 mix of MT90/MTL. Lucas oil stabalizer has been used a few times.

Okay passenger fender has been replace & paint doesn't match (faded ass white). The Motegi & the Racing Harts have some light curbage. There is a small 1/2" tear in the passenger interior door panel. The factory muffler was put back on @ 70k was sitting in the garage since 50k & no I no longer have the aftermarket. The windows are tinted now, the rear glass & passenger rear have bubbles, but I have a lifetime warranty I just need to get the car over there to have redone. Last thing is a round hole in the front bumper it looks fine. the reason it's there is due to a truck's trailer hitch bumping into my car, so I rounded out the hole. The car needs inspection, but won't pass because of the tires & passenger wiper blade. I would handle these things, but like said above I haven't worked in over a year so I don't have the money. The car only sees 5-10 miles a week & that's looking for jobs.

Enough of me running of at the mouth. I'm asking $4500 OBO. Location Fredericksburg, Va 22407. E-Mail: Rotordad@yahoo.com
Here are a few pics.
With Racing Hart's

With Motegi's

Cluster

Interior shots

Under Hood

Woops forgot the alternator, throttle body, O2 sensors, driver window reg/motor & MAF have also been replaced within the year, so maybe 1k on them.

RotorDad · 08-29-2011, 01:58 PM

Price Drop to $4500

RotorDad · 09-02-2011, 03:10 PM

A little update. So I was going through some things in the garage & came across these.

four tie rod ends @ $34 each
one front wheel bearing @ $50
one O2 sensor @ $70
one Mobil 1 oil filter @ $13
one Pure 1 oil filter @ $6
one in cabin filter @ $20
one set of front brakes @ $31
one set of rear brakes @ $ 35
These will go with the car, I will no longer need them. I also just replaced the passenger wiper blade & all the plugs.

RotorDad · 09-08-2011, 04:00 PM

Price drop $4000

RotorDad · 09-09-2011, 07:55 AM

Bump........................

RotorDad · 09-09-2011, 09:03 PM

Got the car inspected today everything is good, but will still need two tires.

RotorDad · 09-17-2011, 10:39 PM

Sold..............

08-28-2011, 05:34 PM	#1
RotorDad Big Ugly Join Date: Apr 2009 Location: Fredericksburg, Va iTrader: (1) Posts: 591 Rep Power: 16	FS - 2002 SER Spec V $4500 OBO Well now has come the time for me to sell the Spec V. I really would like to keep the car, but I have been laid off for some time now & have no choice. Okay the car is a 2002 Sentra SER Spec V (6spd, QR25DE), it's white. The car has 73k on the chassis, but the motor was replaced by Pohanka Nissan of Fredericksburg @ around 50k. As soon as the motor was replaced out went the factory header for a heat wrapped DC Sports race header & cat delete. It has an AEM CAI with the Dry Flo filter which has been heat wrapped. I have the factory wheels/no tires that will go with the car. On the car will be the choice of the buyer 17" Motegi MR7's or 18" Racing Hart C5 EVO's. Both sets of wheels have two good tires & two bad tires. Oil has been regularly changed as well as a 50/50 mix of MT90/MTL. Lucas oil stabalizer has been used a few times. Okay passenger fender has been replace & paint doesn't match (faded ass white). The Motegi & the Racing Harts have some light curbage. There is a small 1/2" tear in the passenger interior door panel. The factory muffler was put back on @ 70k was sitting in the garage since 50k & no I no longer have the aftermarket. The windows are tinted now, the rear glass & passenger rear have bubbles, but I have a lifetime warranty I just need to get the car over there to have redone. Last thing is a round hole in the front bumper it looks fine. the reason it's there is due to a truck's trailer hitch bumping into my car, so I rounded out the hole. The car needs inspection, but won't pass because of the tires & passenger wiper blade. I would handle these things, but like said above I haven't worked in over a year so I don't have the money. The car only sees 5-10 miles a week & that's looking for jobs. Enough of me running of at the mouth. I'm asking $4500 OBO. Location Fredericksburg, Va 22407. E-Mail: Rotordad@yahoo.com Here are a few pics. With Racing Hart's With Motegi's Cluster Interior shots Under Hood Woops forgot the alternator, throttle body, O2 sensors, driver window reg/motor & MAF have also been replaced within the year, so maybe 1k on them. __________________ *Boosted Big Body On 335's* PS3 ID: Rotordad 1986 Mazda RX7 GXL - Street ported 13BT, Haltech, 62mm, ect. 2006 MazdaSpeed 6 - Eagle, Wiseco, Cobb, ect. Last edited by RotorDad; 09-05-2011 at 08:51 AM.. Reason: Price adjustment.

08-29-2011, 01:58 PM	#2
RotorDad Big Ugly Join Date: Apr 2009 Location: Fredericksburg, Va iTrader: (1) Posts: 591 Rep Power: 16	Price Drop to $4500 __________________ *Boosted Big Body On 335's* PS3 ID: Rotordad 1986 Mazda RX7 GXL - Street ported 13BT, Haltech, 62mm, ect. 2006 MazdaSpeed 6 - Eagle, Wiseco, Cobb, ect. Last edited by RotorDad; 08-30-2011 at 11:34 AM..

09-02-2011, 03:10 PM	#3
RotorDad Big Ugly Join Date: Apr 2009 Location: Fredericksburg, Va iTrader: (1) Posts: 591 Rep Power: 16	A little update. So I was going through some things in the garage & came across these. four tie rod ends @ $34 each one front wheel bearing @ $50 one O2 sensor @ $70 one Mobil 1 oil filter @ $13 one Pure 1 oil filter @ $6 one in cabin filter @ $20 one set of front brakes @ $31 one set of rear brakes @ $ 35 These will go with the car, I will no longer need them. I also just replaced the passenger wiper blade & all the plugs. __________________ *Boosted Big Body On 335's* PS3 ID: Rotordad 1986 Mazda RX7 GXL - Street ported 13BT, Haltech, 62mm, ect. 2006 MazdaSpeed 6 - Eagle, Wiseco, Cobb, ect. Last edited by RotorDad; 09-02-2011 at 03:13 PM..

09-08-2011, 04:00 PM	#4
RotorDad Big Ugly Join Date: Apr 2009 Location: Fredericksburg, Va iTrader: (1) Posts: 591 Rep Power: 16	Price drop $4000 __________________ *Boosted Big Body On 335's* PS3 ID: Rotordad 1986 Mazda RX7 GXL - Street ported 13BT, Haltech, 62mm, ect. 2006 MazdaSpeed 6 - Eagle, Wiseco, Cobb, ect.

09-09-2011, 07:55 AM	#5
RotorDad Big Ugly Join Date: Apr 2009 Location: Fredericksburg, Va iTrader: (1) Posts: 591 Rep Power: 16	Bump........................ __________________ *Boosted Big Body On 335's* PS3 ID: Rotordad 1986 Mazda RX7 GXL - Street ported 13BT, Haltech, 62mm, ect. 2006 MazdaSpeed 6 - Eagle, Wiseco, Cobb, ect.

09-09-2011, 09:03 PM	#6
RotorDad Big Ugly Join Date: Apr 2009 Location: Fredericksburg, Va iTrader: (1) Posts: 591 Rep Power: 16	Got the car inspected today everything is good, but will still need two tires. __________________ *Boosted Big Body On 335's* PS3 ID: Rotordad 1986 Mazda RX7 GXL - Street ported 13BT, Haltech, 62mm, ect. 2006 MazdaSpeed 6 - Eagle, Wiseco, Cobb, ect.

09-17-2011, 10:39 PM	#7
RotorDad Big Ugly Join Date: Apr 2009 Location: Fredericksburg, Va iTrader: (1) Posts: 591 Rep Power: 16	Sold.............. __________________ *Boosted Big Body On 335's* PS3 ID: Rotordad 1986 Mazda RX7 GXL - Street ported 13BT, Haltech, 62mm, ect. 2006 MazdaSpeed 6 - Eagle, Wiseco, Cobb, ect.