AZRR engine work

glenrx7 · 03-13-2008, 08:39 AM

Hey all just wanted to give you an Idea of what we do other than sell basic parts.

We are getting to be pretty big as turbo resellers, we sell Garrett at a pretty low price cant always win becuase of price but we always win if it is about service. If you need a turbo or waste gate or even vbands let us quote it atleast. Give us a shot

The biggest part of our shop is the design and builds of rotary performance engines. I was trained by Paul Yaw of Yawpower.com, many of you know this name but some of you dont. For those that dont know, Paul is one of very few that Mazda turns to for advice for rotary engines, now they come to us as well.

So this in an engine we just stacked, it is a mild street port with basic mods for a 3rd gen with stock twins.

Flooder · 04-04-2008, 01:41 PM

Looks good!

RCCAZ 1 · 04-04-2008, 02:00 PM

Great shop. Excellent engine builder and awesome pricing. Glenn, Tom and Shawn are awesome to deal with.

sk8world · 08-03-2008, 11:08 AM

going back looking at you intake ports. How much room do you leave from the water ring area? looks less than the 10mm rule??

glenrx7 · 08-04-2008, 08:39 AM

Quote:

Originally Posted by sk8world

going back looking at you intake ports. How much room do you leave from the water ring area? looks less than the 10mm rule??

I am not sure what your asking? Are you talking the port runner sixe or the window size based on seal area??

sk8world · 08-04-2008, 01:40 PM

from side of port to were the oring groove (water seal) goes. I was worried as mine were smack on 10mm and I read several saying do not go below this so corner seal has enough to support it?? School me some more!

Parts!!!

My shipping is:

Mike Jtineant
Skateworld, Inc.
3185 Leeman Ferry Road
Huntsville, Alabama 35801
256-880-7860

sk8world@hiwaay.net

glenrx7 · 08-04-2008, 06:15 PM

Quote:

Originally Posted by sk8world

from side of port to were the oring groove (water seal) goes. I was worried as mine were smack on 10mm and I read several saying do not go below this so corner seal has enough to support it?? School me some more!

Parts!!!

My shipping is:

Mike Jtineant
Skateworld, Inc.
3185 Leeman Ferry Road
Huntsville, Alabama 35801
256-880-7860

sk8world@hiwaay.net

Well the fact is I am not actually sure what the limit is in mm, I don't use templates for my porting it is a combination of the time spent learning from Paul Yaw and simply mocking an engine up, rotating and studying the limits and effects of our ports. But I assure you the corner seals in supported and the rubber plug is as well.

sk8world · 08-04-2008, 07:45 PM

Quote:

Originally Posted by glenrx7

Well the fact is I am not actually sure what the limit is in mm, I don't use templates for my porting it is a combination of the time spent learning from Paul Yaw and simply mocking an engine up, rotating and studying the limits and effects of our ports. But I assure you the corner seals in supported and the rubber plug is as well.

yeah, that makes sense but too indepth for many.... any chance of getting those parts out tuesday for me? please!

glenrx7 · 08-07-2008, 07:19 PM

Well I was thinking of posting a bunch of our projects in single threads but I think it would be best to just use this thread and show some pictures of things we are doing .....So check back often

glenrx7 · 08-07-2008, 07:27 PM

This is a high horse power engine we built and now are putting it into an fd looking for some really ground breaking power....gt4202 turbo for the hairdryer Francesco Ianetti ceramic seals our race exhaust porting etc...

sk8world · 08-08-2008, 01:12 AM

looking good.. I saw a similar rotor the other day that was lightend up like that but also has material removed from the sides of the faces going to about 2-4mm above the side seals on all 12 corners. Look crazy!

dregg100 · 09-27-2008, 06:45 PM

pricing?

glenrx7 · 10-03-2008, 04:09 PM

It all depends on the customer needs ...Basic rebuilds with new internal seals orings etc is about 3300.00 this does not included new rotor housings...

Many options to choose from

Porting
Balancing
etc

Thanks
AZRR

BurnVktm · 01-03-2010, 06:47 PM

23 more days my friend... I cant wait to see my engine finished.

-Will

04-04-2008, 01:41 PM	#2
Flooder Rotary Fanatic Join Date: Feb 2008 Location: Tucson, Arizona Posts: 321 Rep Power: 17	Looks good! __________________ AZRX7.COM Red 1991 A-package(SOLD) Red 1990 GXL(SOLD) White 1989 GTUs(DEAD) Red 1988 Turbo II(DD) Black 1988 Turbo II(SOLD) Rebuilt and street ported motor, Garrett T04E Turbo, 3" Turbo Inlet Duct/AEM Dry Flow Filter, Your Mom's MBC, Blitz FMIC, 890cc and 1000cc injectors, Tomei FPR, Walbro, Rtek 2.1 ECU, Taurus E-Fan, Turbonetics BOV, 3" Motoria/Corksport Turbo Back Exhaust, Emissions Removed, Greddy Boost Gauge, Megan Racing Water Temp Gauge, 5one5 Triple Gauge Pod, AEM Uego, GP Sports Body Kit, Fiber Images CF Hood, S5 Seats, S5 Tails, S5 Alt, Dual Alt Pulley, D2 Coilovers, NRG Quick Release, Shook Motorsports Radiator, HID's, AN/Steel Braided Oil Cooler Lines, SUPER JDM TYTE DRIFT BUTTON www.DensetsuMotorsports.com www.AZRX7.Com www.FloodersAdventure.com

09-27-2008, 06:45 PM	#12
dregg100 Rotary Fanatic Join Date: Feb 2008 Posts: 432 Rep Power: 17	pricing? __________________ '93 SSM Touring-S475... '87 Tii-LS1/T56

04-04-2008, 02:00 PM	#3
RCCAZ 1 Rotary Fanatic Join Date: Mar 2008 Location: Phoenix, AZ Posts: 288 Rep Power: 17	Great shop. Excellent engine builder and awesome pricing. Glenn, Tom and Shawn are awesome to deal with.

08-03-2008, 11:08 AM	#4
sk8world 600rwhp club member. Join Date: Mar 2008 Posts: 551 Rep Power: 17	going back looking at you intake ports. How much room do you leave from the water ring area? looks less than the 10mm rule??

08-04-2008, 01:40 PM	#6
sk8world 600rwhp club member. Join Date: Mar 2008 Posts: 551 Rep Power: 17	from side of port to were the oring groove (water seal) goes. I was worried as mine were smack on 10mm and I read several saying do not go below this so corner seal has enough to support it?? School me some more! Parts!!! My shipping is: Mike Jtineant Skateworld, Inc. 3185 Leeman Ferry Road Huntsville, Alabama 35801 256-880-7860 sk8world@hiwaay.net

08-07-2008, 07:19 PM	#9
glenrx7 Rotary Fanatic Join Date: Feb 2008 Location: Arizona Posts: 199 Rep Power: 17	Well I was thinking of posting a bunch of our projects in single threads but I think it would be best to just use this thread and show some pictures of things we are doing .....So check back often

08-08-2008, 01:12 AM	#11
sk8world 600rwhp club member. Join Date: Mar 2008 Posts: 551 Rep Power: 17	looking good.. I saw a similar rotor the other day that was lightend up like that but also has material removed from the sides of the faces going to about 2-4mm above the side seals on all 12 corners. Look crazy!

10-03-2008, 04:09 PM	#13
glenrx7 Rotary Fanatic Join Date: Feb 2008 Location: Arizona Posts: 199 Rep Power: 17	It all depends on the customer needs ...Basic rebuilds with new internal seals orings etc is about 3300.00 this does not included new rotor housings... Many options to choose from Porting Balancing etc Thanks AZRR

01-03-2010, 06:47 PM	#14
BurnVktm The Newbie Join Date: Jan 2010 Location: Arizona Posts: 20 Rep Power: 0	23 more days my friend... I cant wait to see my engine finished. -Will