S4 NA clean up

[vex]

List updated.

All parts are OBO, please PM me with offer or further requests for parts as I have much more.

[vex]

Just found an old S4 Tubular Turbo manifold. Should be a direct bolt on for any turbo guys or gals.

$50+shipping

[vex]

Oil Lines Sold.

[vex]

Zip Code for shipment from my place is 24060
If you don't see it, just ask.

ACV w/ new gasket = $40.00 shipped
Rats Nest w/ 3 solenoids = $30.00+shipping (will include solenoid plugs as well if asked)
Thermal Reactor = $10+shipping
S4 Tails = $40+shipping
S4 Stock Radiator = $20+shipping
S4 Stock ECU = $40+shipping
S4 Door trim/weather seal = $20 + shipping
Random S4 Interior pieces (Maroon/red)= $10 ea + shipping
Clutch Master Cylinder = $20+shipping
R/L S4 GXL mirrors (electric) = $50+shipping
Computer FB01A = $25+Shipping
CAS (N326) =$50 Shipped
2 Brand New Tie-Rods = $80 Shipped
2 Brand New Ball-Joints= $80 Shipped
2 Brand New End Link Bushing Kits = $40 Shipped
RPM Switch (Universal) = $30 Shipped
S4 TPS (Pretty sure it's good, but haven't checked it yet) = $25 Shipped
2 S4 Side Marker lenses = $25 Shipped
S4 ACV Block-off Plate = $15 Shipped
S4 Tubular Turbo Manifold = $50 + Shipping

[jtbshaw]

Hey Tyler,

The 2 new end link bushing kits....are these the ones for the links that connect the front sway bar to the lower control arm? I will have to confirm the NA and TII would be the same. If these will work....we need to talk.

Fuel rails should ship Friday. I am waiting on a specific tap to arrive tomrrow or Friday.

Todd B.

[vex]

Originally Posted by nolimitind

Hey Tyler,

The 2 new end link bushing kits....are these the ones for the links that connect the front sway bar to the lower control arm? I will have to confirm the NA and TII would be the same. If these will work....we need to talk.

Fuel rails should ship Friday. I am waiting on a specific tap to arrive tomrrow or Friday.

Todd B.

Yeah, they are. I'm not sure if they're inter-changable or not, I'll double check when I get back to my place. I'm really looking forward to the rails! Check out the build thread in a few and you'll see why

[vex]

bump, would really like to get rid of some of this stuff.

[vex]

ecu is n327

[My5ABaby]

Interested in the tails. Also, do you have front (under the FTP) amber turn signal lenses?

[vex]

Originally Posted by My5ABaby

Interested in the tails. Also, do you have front (under the FTP) amber turn signal lenses?

I do... but I think they're only one side (i have two of them. I'll have to double check). I'll shoot you a PM about the lights

[vex]

Seriously have to move this stuff out. The sooner the better.

[vex]

Here's an updated list of things for sale:

S4 Tails
S4 Tubular Manifold
S4 NA ECU
CAS (N326)
S4 NA Air Pump
S4 NA ACV W/ Gasket
S4 NA Charcoal Canister
S4 NA Exhaust tips (look to be painted stainless steel)
S4 NA Brake Ducts
S4 NA Air Box
S4 NA Snorkle
S4 NA Rats Nest w/ Solenoids (except EGR)
Front Tow Hook
Brown/Red Door weather stripping
S4 Red Inner vent (can't tell if it's passenger or driver side.)
S4 Red lower driverside body piece (covers mounting locations of the center portion of the dash)
Red 4AWG (Might be 0AWG) Battery wire
S4 GXL Mirrors (Electric)
Stock Spark Plug wires
2 S4 Power Rack Ball joints
2 S4 Power Rack outer TieRods
New S4 side marker lights (amber)
Universal RPM switch
S4 NA Front cover oil seal (sits around hub)
S4 Cruise control computer (? FB01A)
S4 Rear view mirror triangle (Passanger side)
Little black box that connects to the back side of the logicon
2 S4 Amber front lenses (right side)
S4 Fuse Cover with identifying sticker
Big bag full of random nuts, bolts, lugs
S4 Clutch master cylinder
2 RX7 End-link kits from energy suspension (graphite empregnated-- 9.8134G)
S4 NA EGR valve
S4 NA Shifter Boot and E-Brake cover (plastic)
Random S4 TII connections (Stainless steel oil return line, solid feed lines, etc--from a stock turbo)
S4 NA Old but still good vac lines (if no one wants these I'll probably just trash them)
1 2.5" aluminum charge pipe standard length
1 2.5" 90* aluminum charge pipe standard length
4 Red Silicon couplers
8 stainless steel t-bolt clamps
1 S4 NA Oil Pan Gasket
1 S4 NA Upper Intake Gasket (connects the pnelum to the Intermediate intake runners)
1 S4 NA Upper Intake Gasket (connects the intermediate intake runners to the LIM)
1 S4 NA Lower Intake Gasket (connects the LIM to the engine)
1 S4 NA Exhaust gasket (connecting the thermal reactor to the catalytic converters)
2 S4 NA 6PI Gaskets
2 Hard Lines (Charcoal cansiter lines, big diameter, small diameter)
1 S4 NA Modified Secondary Fuel Rail (unknown condition--may need welding to be useable. -6AN fittings tapped and mounted on each side)
1 1/4 NPT male to -4AN Male (brass)
5 GLX/Turbo S4 Wheels ranging from excellent condition to fair condition

I think that's all I have. If you see something, shoot me a PM.

[vex]

End-link kits pending sale.

[3rd and final 7]

you think that i could get more info on S4 Tubular Turbo Manifold. condition any cracks , which turbo does it fit, and pics sent to cbittles@yahoo.com

[Ender]

Originally Posted by 3rd and final 7

you think that i could get more info on S4 Tubular Turbo Manifold. condition any cracks , which turbo does it fit, and pics sent to cbittles@yahoo.com

It sounds like it fits the stock S4 turbo. I'd also like to know its condition and see some pictures. PM or email me