wheel/tire fitment pic thread

speedjunkie · 07-06-2010, 06:28 PM

There are probably threads on here about wheel and tire fitment when it comes to how they fit the car, but I wanted to start this thread so people could post pics of their wheel and tire combo so you can see how much the tire stretches, bulges, or fits perfectly.

If you choose to post pics of how they fit the car too, please remember to post if you have stock fenders, rolled, flared, aftermarket widebody, or whatever. It also wouldn't be a bad idea to post camber info as well, and maybe suspension (for reference as far as clearance between wheel and coilover, etc.). And if you've had several setups over the years, please post them up.

The reason I wanted to do this is because I'm currently looking for new tires to fit new wheels and I'd like them to sit perfectly, not bulged and not stretched, and I know tire companies rate their sizes differently than other companies, and most likely the same with wheels. So here goes...

My first setup...
Wheels- Enkei RPF1
Sizes/offsets- 18x9.5 +45 F, 18x10 +38 R
Tires- Dunlop SP Sport FM901 (not sold anymore but I figured new Dunlops might be the same)
Sizes- 235/40-18 F, 265/35-18 R
Optional info- Rolled fenders, no idea on camber, STANCE coilovers

Notes on this fitment...anorexic tires on these wheels. Quite a bit of room, no rubbing IIRC. I rolled the fenders anticipating not having a lot of room but there was quite a bit actually.

speedjunkie · 07-06-2010, 06:32 PM

My second setup...
Wheels- Enkei RPF1
Sizes/offsets- 18x10 +38 F, 18x10.5 +15 R
Tires- Dunlop SP Sport FM901 F, Sumitomo HTRZ III R
Sizes- 265/35-18 F, 295/30-18 R
Optional info- Flared rear fenders, tried to flare fronts but unsuccessful, still no idea on camber (same as before, probably close to stock), STANCE coilovers

Notes on this setup...still anorexic on the front, thank goodness because I needed them to be stretched since I couldn't flare the fender. The rear tires fit 10.5" perfectly! I don't remember much rubbing on the front, maybe a little, but not much on the rear surprisingly.

speedjunkie · 07-06-2010, 06:35 PM

My third and current setup...
Wheels- Enkei RPF1
Sizes/offsets- 18x10 +38 F, 18x10.5 +15 R
Tires- Nitto NT555RII
Sizes- 285/35-18 F, 305/35-18 R
Optional info- Flared the rear fenders a hell of a lot more (probably about 2 inches past stock at this point), camber I believe is about -1.5* front and -1* rear, but I don't remember for sure, STANCE coilovers still.

Notes on this setup...these tires, I feel, are way too tall. The 285/35 fits the 10" pretty well width-wise, but it's just too tall. And the 305/35 bulges out a bit on the 10.5, which would be OK if, again, the tire wasn't too tall. I can't tell if there is rubbing when I'm driving it, but when I'm stopped there is tire residue on the rear fenders where the end of the lip (flare) ends on the stock fender. I believe there is rubbing on the front fenders too but I can't tell for sure. I DO know that the tires rub the frame in front of the wheel on one side, driver's side IIRC. I was thinking about just putting a spacer on there and see what happens but decided to just get smaller tires, and since I wanted a new set of wheels anyway that I'd just get new wheels too haha. I have some Shine 20+ wide front fenders but I haven't put them on yet. I've test fit them and this front setup leaves about 5-10mm of clearance.

MaczPayne · 07-09-2010, 12:53 AM

255/40/17, 17x9 +24 with 5mm spacer
275/40/17, 17x9 +17

Rolled and flared fenders on all corners

Old setup (17x9 +24, 255/40/17 x 4)

rx7 vinnie · 07-16-2010, 11:47 PM

My street car setup... Gramlights 57c 18x9 +20 on front with 235-40-18's. 18x10 +20 on rear 265-35-18's Toyo T1R's. front fender rolled and slightly pulled and rear fender rolled.

My track car setup....Enkie Aegis 17x8.5 +38 all around 235-40-17 Toyo RA1's

RCCAZ 1 · 07-18-2010, 08:17 PM

Pretty conservative for me.

Wheels: Work Meisters 3 pc 18x9 +48 front (A disk) and 18x10 +40 rears (O disk)
Tires: Bridgestone S02s - 265/35 rears and 235/40 fronts

***TitaniumTT*** · 07-18-2010, 08:39 PM

Damn Johnson, I knew I should've rocked the 255/275 combo on my 17x8 17x9 Works. The 235/255 combo is just not working for me, the tires look too narrow for the rims.

Looks fucking awesome

classicauto · 07-21-2010, 10:48 AM

Quote:

Originally Posted by TitaniumTT

the tires look too narrow for the rims

pffft, admit you love the stretch look you ricer!

RotorDad · 07-21-2010, 02:58 PM

Lets not see any stretched tires please! Using a 225/35-17 on a 17x12 wheel looks like shit. I see this all too much on the other forums.

Silver86 · 07-21-2010, 03:07 PM

Quote:

Originally Posted by RotorDad

Lets not see any stretched tires please! Using a 225/35-17 on a 17x12 wheel looks like shit. I see this all too much on the other forums.

Phoenix7 · 07-21-2010, 05:22 PM

Quote:

Originally Posted by RotorDad

Lets not see any stretched tires please! Using a 225/35-17 on a 17x12 wheel looks like shit. I see this all too much on the other forums.

thank God I'm not the only one that hates that faggy fad. The one posted above barely qualifies as a stretched tire since is not noticeable ( I guess I've seen BAD stretched setups)....i see no stretch fad ITT.

I don't know why ppl like to do the "aggressive fitment/fat lip" but the wheels don't fit the car without rubbing on the suspension, fender or requiring retarded camber as a band-aid.

Macz and Josh are going Wide with their setups but they're doing it right!! Good posts and pics so far.

Zauber 3-piece Meshies
17x8" +29 235s Front
17x9" +36 255s Rear
KYB AGXs on Eibach Pro springs.

I know I need new tires and coilovers...no $$ for them quite yet

MaczPayne · 07-22-2010, 01:36 AM

If I go into a corner hard enough, you'll see my tires "stretch", lol.

Exhibit A:

RotorDad · 07-22-2010, 06:44 PM

I just would rather see wheels & tires that fit they were meant to, but if some feels the need to follow that trend then oh well it's thier car. I need to get new pics, but here are some of mine.

Phoenix7 · 07-22-2010, 06:54 PM

Quote:

Originally Posted by RotorDad

I just would rather see wheels & tires that fit they were meant to, but if some feels the need to follow that trend then oh well it's thier car. I need to get new pics, but here are some of mine.

I FORGOT YOU HAD THE MARIAH WIDEBODY!!!

speedjunkie · 07-23-2010, 02:32 AM

Do you have specs on your setup RotorDad? I assume the rears are 335 LOL. Looks mean!!

07-09-2010, 12:53 AM	#4
MaczPayne Bah! Join Date: Mar 2008 Location: Riverside, SoCal iTrader: (1) Posts: 442 Rep Power: 17	255/40/17, 17x9 +24 with 5mm spacer 275/40/17, 17x9 +17 Rolled and flared fenders on all corners Old setup (17x9 +24, 255/40/17 x 4) __________________ Johnson TA FC in the works!

07-16-2010, 11:47 PM	#5
rx7 vinnie I SEE DEAD PEOPLE Join Date: Mar 2008 Location: nashville, tn (antioch) iTrader: (0) Posts: 743 Rep Power: 17	My street car setup... Gramlights 57c 18x9 +20 on front with 235-40-18's. 18x10 +20 on rear 265-35-18's Toyo T1R's. front fender rolled and slightly pulled and rear fender rolled. My track car setup....Enkie Aegis 17x8.5 +38 all around 235-40-17 Toyo RA1's __________________ VIN-AUTO Rotary list of Fails below: 86 mazda rx7 csp 61 N/A= because RACECAR 87 mazda rx7 t2 with 13b-re cosmo GT42= FKN RUNS!!! 03 Dodge Viper SRT-10 Vert 06 dodge ram 2500 Megacab turbo Cummins=puller 16 MB ML350

07-18-2010, 08:39 PM	#7
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Damn Johnson, I knew I should've rocked the 255/275 combo on my 17x8 17x9 Works. The 235/255 combo is just not working for me, the tires look too narrow for the rims. Looks fucking awesome __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

07-21-2010, 02:58 PM	#9
RotorDad Big Ugly Join Date: Apr 2009 Location: Fredericksburg, Va iTrader: (1) Posts: 591 Rep Power: 16	Lets not see any stretched tires please! Using a 225/35-17 on a 17x12 wheel looks like shit. I see this all too much on the other forums. __________________ *Boosted Big Body On 335's* PS3 ID: Rotordad 1986 Mazda RX7 GXL - Street ported 13BT, Haltech, 62mm, ect. 2006 MazdaSpeed 6 - Eagle, Wiseco, Cobb, ect.

07-22-2010, 01:36 AM	#12
MaczPayne Bah! Join Date: Mar 2008 Location: Riverside, SoCal iTrader: (1) Posts: 442 Rep Power: 17	If I go into a corner hard enough, you'll see my tires "stretch", lol. Exhibit A: __________________ Johnson TA FC in the works!

07-18-2010, 08:17 PM	#6
RCCAZ 1 Rotary Fanatic Join Date: Mar 2008 Location: Phoenix, AZ iTrader: (0) Posts: 288 Rep Power: 17	Pretty conservative for me. Wheels: Work Meisters 3 pc 18x9 +48 front (A disk) and 18x10 +40 rears (O disk) Tires: Bridgestone S02s - 265/35 rears and 235/40 fronts

07-22-2010, 06:44 PM	#13
RotorDad Big Ugly Join Date: Apr 2009 Location: Fredericksburg, Va iTrader: (1) Posts: 591 Rep Power: 16	I just would rather see wheels & tires that fit they were meant to, but if some feels the need to follow that trend then oh well it's thier car. I need to get new pics, but here are some of mine. __________________ *Boosted Big Body On 335's* PS3 ID: Rotordad 1986 Mazda RX7 GXL - Street ported 13BT, Haltech, 62mm, ect. 2006 MazdaSpeed 6 - Eagle, Wiseco, Cobb, ect.

07-23-2010, 02:32 AM	#15
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO iTrader: (1) Posts: 2,089 Rep Power: 19	Do you have specs on your setup RotorDad? I assume the rears are 335 LOL. Looks mean!!