a bunch of GSLSE parts

Wangan_X · 10-20-2009, 02:49 PM

Everything is BO.

-RE-Speed race coilovers with zero miles. 10" springs 225# front, 125# rear.
-New tokico struts front and rear
-Mallory 4309 Fuel Pressure Regulator to use a carb with EFI pump
-Racing Beat front swaybar (not installed)
-Autovation pedals (half installed)
-front strut brace
-throttle cable for weber 48/52 IDA
-autozone electric fan and thermoswitch
-dual alternator pulley
-GSL-SE mount plate
-Mazda Motorsports hard engine mounts
-GSL-SE tranny
-Mazda Motorsports hard tranny mount
-GSL-SE driveshaft
-Box with all GSL-SE wiring, computers, harnesses injectors
-Box full of everything else I can find.
-custom aluminum driveshaft to use a T2 trans with the SE differential
-Magnecore 10mm plug wires

If you are in AL all parts are located in Gardendale at FTPerformance.

LSD rear diff and others coming shortly.

moremazda · 10-20-2009, 07:14 PM

Do you happen to have the front spindles? Just the spindles.

Ryan

Wangan_X · 10-20-2009, 11:25 PM

i will have them available soon but as of right now no they aren't available

3rd and final 7 · 10-20-2009, 11:48 PM

are you willing to sell just the injectors?

Wangan_X · 10-21-2009, 08:51 PM

i'll see if they are still in the block, I don' think they are

The whole car is being parted so if you need anything other than the roller and seats let me know

RotaryProphet · 10-21-2009, 11:24 PM

Looking for all 4 calipers. Shoot me a PM if you have them with what you'd want for them shipped to 45176.

sikest1 · 10-29-2009, 06:21 PM

Need the rear axle shafts and front spindles

staticpat · 10-29-2009, 09:52 PM

Injectors are in box with all EFI stuff.

TaylorI · 01-10-2010, 01:58 AM

How much for the box of electronics and the custom driveshaft? Also do you have a brake master cylinder and booster?

sen2two · 03-06-2010, 02:04 PM

im looking for gsl-se housings and 48 or larger webers. let me know if you have them thanks!

staticpat · 03-06-2010, 10:19 PM

I doubt he checks on this stuff. But I know the motor was still with the car. It just lost compression, so the housings should be fine?

Kentetsu · 03-15-2010, 10:42 AM

How much for the pedals? Are these the ones we had a group buy on some time ago, with the rotor design?

rotor85 · 03-24-2010, 09:41 AM

how much for the RB swaybar and coilovers shipped to 79932? thanks

staticpat · 03-24-2010, 05:08 PM

I'll call the current owner this weekend and get him to reply.

Maybe I should just buy the car back and make some $$$$$

JunpoweR · 03-31-2010, 04:08 AM

I need complete rats nest with all vent solenoids and vacuum switch solenoids please!

10-20-2009, 02:49 PM	#1
Wangan_X The Newbie Join Date: Nov 2008 iTrader: (0) Posts: 16 Rep Power: 0	a bunch of GSLSE parts Everything is BO. -RE-Speed race coilovers with zero miles. 10" springs 225# front, 125# rear. -New tokico struts front and rear -Mallory 4309 Fuel Pressure Regulator to use a carb with EFI pump -Racing Beat front swaybar (not installed) -Autovation pedals (half installed) -front strut brace -throttle cable for weber 48/52 IDA -autozone electric fan and thermoswitch -dual alternator pulley -GSL-SE mount plate -Mazda Motorsports hard engine mounts -GSL-SE tranny -Mazda Motorsports hard tranny mount -GSL-SE driveshaft -Box with all GSL-SE wiring, computers, harnesses injectors -Box full of everything else I can find. -custom aluminum driveshaft to use a T2 trans with the SE differential -Magnecore 10mm plug wires If you are in AL all parts are located in Gardendale at FTPerformance. LSD rear diff and others coming shortly.

10-29-2009, 06:21 PM	#7
sikest1 pwrdbyrotorcuzpistnsrweak Join Date: Sep 2009 Location: Cambridge, On iTrader: (0) Posts: 36 Rep Power: 0	pARTS Need the rear axle shafts and front spindles

10-29-2009, 09:52 PM	#8
staticpat Rally Fanboy Join Date: Feb 2008 Location: New York iTrader: (1) Posts: 147 Rep Power: 17	Injectors are in box with all EFI stuff. __________________

03-06-2010, 02:04 PM	#10
sen2two KTEC Join Date: Jan 2009 iTrader: (2) Posts: 642 Rep Power: 0	im looking for gsl-se housings and 48 or larger webers. let me know if you have them thanks! __________________ what I have: 1985 Gs:12a All motor Drag car - 1973 Rx2: Play car What I had: 93 Touring: TRADED - 91 Coupe: TRADED - 90 GTU: RHD - 88 10AE: SOLD - 87 Base: SOLD - 86 Base: SOLD - 1985 GSLSE - 85 Gsl: SOLD - 80 Gs: TRADED - 1972 Rx2

03-06-2010, 10:19 PM	#11
staticpat Rally Fanboy Join Date: Feb 2008 Location: New York iTrader: (1) Posts: 147 Rep Power: 17	I doubt he checks on this stuff. But I know the motor was still with the car. It just lost compression, so the housings should be fine? __________________

10-20-2009, 07:14 PM	#2
moremazda shookmotorsports.com Join Date: Apr 2008 Location: Rockford, IL iTrader: (1) Posts: 108 Rep Power: 17	Do you happen to have the front spindles? Just the spindles. Ryan

10-20-2009, 11:25 PM	#3
Wangan_X The Newbie Join Date: Nov 2008 iTrader: (0) Posts: 16 Rep Power: 0	i will have them available soon but as of right now no they aren't available

10-20-2009, 11:48 PM	#4
3rd and final 7 Rotary Fan in Training Join Date: Jan 2009 iTrader: (1) Posts: 82 Rep Power: 16	are you willing to sell just the injectors?

10-21-2009, 08:51 PM	#5
Wangan_X The Newbie Join Date: Nov 2008 iTrader: (0) Posts: 16 Rep Power: 0	i'll see if they are still in the block, I don' think they are The whole car is being parted so if you need anything other than the roller and seats let me know

10-21-2009, 11:24 PM	#6
RotaryProphet Rotary Fanatic Join Date: Sep 2008 iTrader: (0) Posts: 147 Rep Power: 17	Looking for all 4 calipers. Shoot me a PM if you have them with what you'd want for them shipped to 45176.

01-10-2010, 01:58 AM	#9
TaylorI Rotary Fan in Training Join Date: Dec 2009 iTrader: (0) Posts: 37 Rep Power: 0	How much for the box of electronics and the custom driveshaft? Also do you have a brake master cylinder and booster?

03-15-2010, 10:42 AM	#12
Kentetsu RCC Contributor Join Date: Feb 2008 Location: Grand Rapids, Michigan iTrader: (1) Posts: 530 Rep Power: 17	How much for the pedals? Are these the ones we had a group buy on some time ago, with the rotor design? __________________ "Learn from the past, or it will become your future...." '85 GS 12a + LSD/Sterling carb/Respeed coilovers/Respeed front swaybar/Respeed adj. rear spring perches/Illuminas/Bilsteins on rear AutoX vids @ http://www.youtube.com/user/Kentetsu1

03-24-2010, 09:41 AM	#13
rotor85 The Newbie Join Date: Dec 2009 Location: Hell Paso, Texas iTrader: (0) Posts: 28 Rep Power: 0	how much for the RB swaybar and coilovers shipped to 79932? thanks

03-24-2010, 05:08 PM	#14
staticpat Rally Fanboy Join Date: Feb 2008 Location: New York iTrader: (1) Posts: 147 Rep Power: 17	I'll call the current owner this weekend and get him to reply. Maybe I should just buy the car back and make some $$$$$ __________________

03-31-2010, 04:08 AM	#15
JunpoweR Rotary Fan in Training Join Date: May 2008 iTrader: (0) Posts: 66 Rep Power: 0	I need complete rats nest with all vent solenoids and vacuum switch solenoids please! __________________ --^v--JunpoweR--^v-- "90 GTUs Crystal White GT35 WB TA Project "90 GTUs Brilliant Black Restoration 1984 GSL-SE Daily