Mercury Marine coils now available!

C. Ludwig · 04-13-2011, 01:13 PM

Very excited to announce that we now have a source for the IGN and IGN-1A Mercury Marine ignition coils! AEM is rebadging these coils and offering them under their name. We'll have the IGN (no internal ignitor) and the IGN-1A (built-in ignitor) priced at $55 and $72 respectively. These coils are HOT! 103 mJ output compared with an M&W CDI's 115 mJ output!

vex · 04-13-2011, 01:40 PM

Sweet!

***TitaniumTT*** · 04-13-2011, 01:43 PM

I can attest to the stoutness of these coils. They surprised me on the dyno.

RXTASY · 04-13-2011, 10:04 PM

They have worked really well for me also.
Easy to mount them using the existing stock mounts too!
Direct Fire baby!

eddierotary · 04-17-2011, 09:09 AM

im just wondering can you use this with any ems or stock igniter?

C. Ludwig · 04-17-2011, 09:17 AM

Pretty much any EMS. The IGN-1A has a built-in ignitor, so the stock ignitor is not needed. I've used these with Haltech and PFC with great results. I know they work with Microtech, Motec, and the PnP AEM. If you're using the universal AEM, with the built-in ignition driver, you'll need the standard IGN coil without the ignitor.

If you wanted to use them with a stock ECU and stock ignitor you'd probably not have real good results. The IGN coil draws some pretty serious amps and needs a high output ignitor to function properly.

eddierotary · 04-17-2011, 09:23 AM

so i might have to use a X4 for my microtech, because i have a microtech ltx8 setup for factory coil

Ian · 04-17-2011, 03:08 PM

So are you telling me I can run these straight with the haltech and without a CDI box? Sort of makes my $1200 autronic 500R useless!!!

I'm still running my stock fc coils in direct fire mode....

GreyGT-C · 04-19-2011, 04:24 PM

do they come with electrical pigtails also? or are they standard weatherpack connectors?

vex · 04-20-2011, 09:33 AM

They come with crimp terminals (at least mine did... don't know if AEM is doing it the same way)

C. Ludwig · 04-20-2011, 10:22 AM

Breaking my "no posting on vacation" vow...

The IGN-1A will work with either Microtech or Haltech directly. Really any system that allows a falling edge output with programmable dwell control. No external ignitor needed. The Microtech X4 box is simply a fancy name for external ignitor. If you already have the X4 you may be able to run the standard IGN coil (no built-in ignitor), which is essentially the same coil but a little less expensive. However, the IGN coil needs an ignitor that is capable of supplying a large amount of current. The internal ignitor of the IGN-1A is rated for 19 amps. You'll need an ignitor with that kind of rating to allow the coil to work it's best and to ensure you don't burn down the ignitor itself. I know there is at least one guy on efi101.com that has used the IGN-1A with a Microtech system.

Ian, you can run these without a CDI box and get a similar amount of spark energy at the plug. The upside over CDI with the inductive coils is that you also get a longer duration spark. Win-win. If you have the Autronic, go ahead and run it. Otherwise, unless you're running over 30 psi of boost or perhaps straight methanol, these are the coils I'm recommending.

The coils will ship with a connector plug and pin set. The installer will need to crimp the terminals on the wires and assemble the connectors. If that's something you don't feel comfortable with, we can assemble a pigtail for you.

Dannobre · 04-22-2011, 10:47 AM

"However, the IGN coil needs an ignitor that is capable of supplying a large amount of current"

And the x4 box won't fit the bill for that

04-13-2011, 01:13 PM	#1
C. Ludwig Rotary Masochist Join Date: May 2008 Location: Floyds Knobs, IN iTrader: (5) Posts: 494 Rep Power: 17	Mercury Marine coils now available! Very excited to announce that we now have a source for the IGN and IGN-1A Mercury Marine ignition coils! AEM is rebadging these coils and offering them under their name. We'll have the IGN (no internal ignitor) and the IGN-1A (built-in ignitor) priced at $55 and $72 respectively. These coils are HOT! 103 mJ output compared with an M&W CDI's 115 mJ output! __________________ _______________________________________________ *One stop Haltech, AEM, Syvecs shopping. Installation and tuning.* http://www.lms-efi.com *Free support. Drop us an email.* chris@lms-efi.com 502-515-7482 Facebook @LMS-EFI

04-13-2011, 01:40 PM	#2
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. iTrader: (6) Posts: 2,113 Rep Power: 19	Sweet! __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group

04-13-2011, 01:43 PM	#3
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	I can attest to the stoutness of these coils. They surprised me on the dyno. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

04-13-2011, 10:04 PM	#4
RXTASY idahorotary.com Join Date: Mar 2010 Location: Idaho iTrader: (0) Posts: 135 Rep Power: 15	They have worked really well for me also. Easy to mount them using the existing stock mounts too! Direct Fire baby! __________________ 87 TII-E85-600+ RWHP and climbing Life starts at 2 bar! Come visit my forum! idahorotary.com http://idahorotary.com/smf/index.php

04-17-2011, 09:09 AM	#5
eddierotary boosted Join Date: Jun 2008 Location: Evans Mills NY iTrader: (0) Posts: 22 Rep Power: 0	im just wondering can you use this with any ems or stock igniter? __________________ 06 Subaru WRX 91 Mazda Rx7 GXL

04-17-2011, 09:17 AM	#6
C. Ludwig Rotary Masochist Join Date: May 2008 Location: Floyds Knobs, IN iTrader: (5) Posts: 494 Rep Power: 17	Pretty much any EMS. The IGN-1A has a built-in ignitor, so the stock ignitor is not needed. I've used these with Haltech and PFC with great results. I know they work with Microtech, Motec, and the PnP AEM. If you're using the universal AEM, with the built-in ignition driver, you'll need the standard IGN coil without the ignitor. If you wanted to use them with a stock ECU and stock ignitor you'd probably not have real good results. The IGN coil draws some pretty serious amps and needs a high output ignitor to function properly. __________________ _______________________________________________ *One stop Haltech, AEM, Syvecs shopping. Installation and tuning.* http://www.lms-efi.com *Free support. Drop us an email.* chris@lms-efi.com 502-515-7482 Facebook @LMS-EFI

04-17-2011, 09:23 AM	#7
eddierotary boosted Join Date: Jun 2008 Location: Evans Mills NY iTrader: (0) Posts: 22 Rep Power: 0	so i might have to use a X4 for my microtech, because i have a microtech ltx8 setup for factory coil __________________ 06 Subaru WRX 91 Mazda Rx7 GXL

04-17-2011, 03:08 PM	#8
Ian REIAN Join Date: Feb 2008 iTrader: (0) Posts: 112 Rep Power: 17	So are you telling me I can run these straight with the haltech and without a CDI box? Sort of makes my $1200 autronic 500R useless!!! I'm still running my stock fc coils in direct fire mode.... __________________ 1989 Turbo II. Track Car 1988 10thAE. Garage Queen 400+rwhp

04-19-2011, 04:24 PM	#9
GreyGT-C The Newbie Join Date: Jan 2011 iTrader: (0) Posts: 10 Rep Power: 0	do they come with electrical pigtails also? or are they standard weatherpack connectors?

04-20-2011, 09:33 AM	#10
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. iTrader: (6) Posts: 2,113 Rep Power: 19	They come with crimp terminals (at least mine did... don't know if AEM is doing it the same way) __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group

04-20-2011, 10:22 AM	#11
C. Ludwig Rotary Masochist Join Date: May 2008 Location: Floyds Knobs, IN iTrader: (5) Posts: 494 Rep Power: 17	Breaking my "no posting on vacation" vow... The IGN-1A will work with either Microtech or Haltech directly. Really any system that allows a falling edge output with programmable dwell control. No external ignitor needed. The Microtech X4 box is simply a fancy name for external ignitor. If you already have the X4 you may be able to run the standard IGN coil (no built-in ignitor), which is essentially the same coil but a little less expensive. However, the IGN coil needs an ignitor that is capable of supplying a large amount of current. The internal ignitor of the IGN-1A is rated for 19 amps. You'll need an ignitor with that kind of rating to allow the coil to work it's best and to ensure you don't burn down the ignitor itself. I know there is at least one guy on efi101.com that has used the IGN-1A with a Microtech system. Ian, you can run these without a CDI box and get a similar amount of spark energy at the plug. The upside over CDI with the inductive coils is that you also get a longer duration spark. Win-win. If you have the Autronic, go ahead and run it. Otherwise, unless you're running over 30 psi of boost or perhaps straight methanol, these are the coils I'm recommending. The coils will ship with a connector plug and pin set. The installer will need to crimp the terminals on the wires and assemble the connectors. If that's something you don't feel comfortable with, we can assemble a pigtail for you. __________________ _______________________________________________ *One stop Haltech, AEM, Syvecs shopping. Installation and tuning.* http://www.lms-efi.com *Free support. Drop us an email.* chris@lms-efi.com 502-515-7482 Facebook @LMS-EFI

04-22-2011, 10:47 AM	#12
Dannobre Rotary Fan in Training Join Date: Oct 2008 iTrader: (0) Posts: 87 Rep Power: 16	"However, the IGN coil needs an ignitor that is capable of supplying a large amount of current" And the x4 box won't fit the bill for that