used parts section for sale cheap! check it out

730RWHP12A · 10-23-2008, 10:45 AM

used parts for sale section cheap!!! remember its a buyers market so all prices are negotiable! also if you dont see a part listed you can always request it

--------------------------------------------------------------------------------

i will update this list weekly, so check back often to see if there is anything you want
13B racingbeat exhaust heade--- like new $180.00

used low mileage GSL-SE 13B motor with warranty $500.00

used 12A that runs with oil leak $300.00

used JDM FD 5 speed transmission, does not grind works great $400.00

nikki carb, race prepped $300.00

de-smogged 12A nikki intake manifold(egr and coolant passages have been welded up to reduce intake temperatures) a great power upgrade for cheap! $80.00

black sunroof latch assembly, round dial type( 80-83).......$60.00

exterior door handles fits 79-85 cars.....$25.00

exterior door handles fits 86-92 cars.....$60.00

84-85 power window switches..... $40.00

quiet good condition 79-80 transmission with warranty $350.00

grey 84-85 center armrest assembly, good condition, from a GSL model....$40.00

glass sunroofs avail, 80-85 ppg mfg.. good condition $200.00

new GT47-80 garret turbo.......$2,000

gsl=se afm (used)$40.00

msc engine rotors, housings available, please inquire within(pm)

turbo 2 intake manifold inlet adapters(2-1/2 straight inlet)..... $80.00

turbo 2 intake manifolds uppers and lowers available $60.00-$120.00

gsl-se suspension complete changeover includes everything you will need to convert your car ! brakes, rotors have approx. 2,000 miles, front struts were also replaced 4,000 miles ago with original kyb inserts.......$1,500

complete 85 12a non turbo motor.. was running great when removed for a turbo swap.. guaranteed to run good!!!..........$650.00

several msd efi fuel pumps.............$100.00 each

msc 91 convertable parts, air bag, turn signal switch, visors,ignition switch

fully built pinned bridgeported 13B 4 port( early type) 3mm apex seals new rotor hsgs, all new seals and springs, new oil o-rings and carriers, one year warranty $3,800

os geiken clutch/ flywheel setup, like new twin plate style for turbo 2 $800.00

os geiken clutch flywheel setup, missing pressure plate twin plate style for turbo 2 $300.00

Whizbang · 10-23-2008, 10:54 AM

ooooo....i need to get the next two paychecks in. Would you take like 50% down to hold an item for another two weeks?

730RWHP12A · 10-23-2008, 11:59 AM

Quote:

Originally Posted by Low Impedance

ooooo....i need to get the next two paychecks in. Would you take like 50% down to hold an item for another two weeks?

you dont need a deposit, i will hold an item for ya

Whizbang · 10-23-2008, 12:06 PM

I want / need the clutch/flywheel for the turbo 2. Does it come with the counterweight?

730RWHP12A · 10-23-2008, 01:55 PM

Quote:

Originally Posted by Low Impedance

I want / need the clutch/flywheel for the turbo 2. Does it come with the counterweight?

if i have the right counterweight ill throw it in.

10-23-2008, 02:13 PM

I know its not on here but I figured I would ask..

drivers rear speaker cover/grill with no breaks/cracks

turbovert91 · 10-23-2008, 10:27 PM

Any other vert parts? Specifically the bracket/capacitors for the airbag system?

730RWHP12A · 10-24-2008, 08:42 AM

Quote:

Originally Posted by turbovert91

Any other vert parts? Specifically the bracket/capacitors for the airbag system?

do you mean the sensors that mount to the core support? air bag control module is sold

turbovert91 · 10-24-2008, 09:36 AM

Not sure, I'm talking about the blue boxes attached to a bracket on the steering column under the dash...here's a pic of one:

730RWHP12A · 10-24-2008, 02:00 PM

ill look for it. thanks for the pic!

Whizbang · 10-28-2008, 12:30 AM

Quote:

Originally Posted by 730RWHP12A

you dont need a deposit, i will hold an item for ya

motor blew in the turbo II today, so i guess this is no longer on my list.

730RWHP12A · 10-29-2008, 02:20 PM

Quote:

Originally Posted by Low Impedance

motor blew in the turbo II today, so i guess this is no longer on my list.

oh, no!! thats no good.
i have used motors too

3rd and final 7 · 03-05-2009, 12:05 AM

Hey Robert if you have a TII ACV how much would that be?

730RWHP12A · 03-05-2009, 11:38 AM

Quote:

Originally Posted by 3rd and final 7

Hey Robert if you have a TII ACV how much would that be?

yes $25.00 shipped. a pic of the exact acv valve you want to replace would be great as there are some minor differences.

3rd and final 7 · 03-05-2009, 12:43 PM

i dont have the ACV it self bc i bought the intake mani w/o it but if a pic of the mani will help as far as which one that i have?

10-23-2008, 10:45 AM	#1
730RWHP12A Rotary Fanatic Join Date: Mar 2008 Location: chatsworth, california iTrader: (8) Posts: 349 Rep Power: 17	used parts section for sale cheap! check it out used parts for sale section cheap!!! remember its a buyers market so all prices are negotiable! also if you dont see a part listed you can always request it -------------------------------------------------------------------------------- i will update this list weekly, so check back often to see if there is anything you want 13B racingbeat exhaust heade--- like new $180.00 used low mileage GSL-SE 13B motor with warranty $500.00 used 12A that runs with oil leak $300.00 used JDM FD 5 speed transmission, does not grind works great $400.00 nikki carb, race prepped $300.00 de-smogged 12A nikki intake manifold(egr and coolant passages have been welded up to reduce intake temperatures) a great power upgrade for cheap! $80.00 black sunroof latch assembly, round dial type( 80-83).......$60.00 exterior door handles fits 79-85 cars.....$25.00 exterior door handles fits 86-92 cars.....$60.00 84-85 power window switches..... $40.00 quiet good condition 79-80 transmission with warranty $350.00 grey 84-85 center armrest assembly, good condition, from a GSL model....$40.00 glass sunroofs avail, 80-85 ppg mfg.. good condition $200.00 new GT47-80 garret turbo.......$2,000 gsl=se afm (used)$40.00 msc engine rotors, housings available, please inquire within(pm) turbo 2 intake manifold inlet adapters(2-1/2 straight inlet)..... $80.00 turbo 2 intake manifolds uppers and lowers available $60.00-$120.00 gsl-se suspension complete changeover includes everything you will need to convert your car ! brakes, rotors have approx. 2,000 miles, front struts were also replaced 4,000 miles ago with original kyb inserts.......$1,500 complete 85 12a non turbo motor.. was running great when removed for a turbo swap.. guaranteed to run good!!!..........$650.00 several msd efi fuel pumps.............$100.00 each msc 91 convertable parts, air bag, turn signal switch, visors,ignition switch fully built pinned bridgeported 13B 4 port( early type) 3mm apex seals new rotor hsgs, all new seals and springs, new oil o-rings and carriers, one year warranty $3,800 os geiken clutch/ flywheel setup, like new twin plate style for turbo 2 $800.00 os geiken clutch flywheel setup, missing pressure plate twin plate style for turbo 2 $300.00 __________________ rotaryshack.com Last edited by 730RWHP12A; 11-14-2008 at 06:16 PM..

10-23-2008, 10:54 AM	#2
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp iTrader: (5) Posts: 3,190 Rep Power: 20	ooooo....i need to get the next two paychecks in. Would you take like 50% down to hold an item for another two weeks? __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

10-23-2008, 12:06 PM	#4
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp iTrader: (5) Posts: 3,190 Rep Power: 20	I want / need the clutch/flywheel for the turbo 2. Does it come with the counterweight? __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

10-24-2008, 02:00 PM	#10
730RWHP12A Rotary Fanatic Join Date: Mar 2008 Location: chatsworth, california iTrader: (8) Posts: 349 Rep Power: 17	ill look for it. thanks for the pic! __________________ rotaryshack.com

10-23-2008, 02:13 PM	#6
SpooledupRacing Guest Posts: n/a	I know its not on here but I figured I would ask.. drivers rear speaker cover/grill with no breaks/cracks

10-23-2008, 10:27 PM	#7
turbovert91 Rotary Fan in Training Join Date: Mar 2008 iTrader: (0) Posts: 40 Rep Power: 0	Any other vert parts? Specifically the bracket/capacitors for the airbag system?

10-24-2008, 09:36 AM	#9
turbovert91 Rotary Fan in Training Join Date: Mar 2008 iTrader: (0) Posts: 40 Rep Power: 0	Not sure, I'm talking about the blue boxes attached to a bracket on the steering column under the dash...here's a pic of one:

03-05-2009, 12:05 AM	#13
3rd and final 7 Rotary Fan in Training Join Date: Jan 2009 iTrader: (1) Posts: 82 Rep Power: 16	Hey Robert if you have a TII ACV how much would that be?

03-05-2009, 12:43 PM	#15
3rd and final 7 Rotary Fan in Training Join Date: Jan 2009 iTrader: (1) Posts: 82 Rep Power: 16	i dont have the ACV it self bc i bought the intake mani w/o it but if a pic of the mani will help as far as which one that i have?