Gauge Pod Updates and the Best Way for Ordering Gauge Pods

Flyrx7 · 07-02-2008, 02:15 AM

How to order pods:

- Send me an email @ flyrx7@aol.com with the gauge pod part # in the subject heading. See this thread for pictures and part nomenclature:
http://rotarycarclub.com/rotary_foru...ead.php?t=5626

Within the email include:
- Your name
- Your forum ID
- An email address to contact you by (if different than the one you're sending from).
- Also let me know if you will require spacer rings.

That's it.

The reason that it has to be email is that it lessens the confusion for me and that is also how the Waiting List is formatted as well. All payment and shipping information is handled via email as well. If the pods are not in stock I will add you to a production waiting list

Payment can be Paypal, personal checks and money orders. I'm in the process of setting up to receive credit cards too, but my bank is dragging their feet. All payments and shipping info will be handled once the pod(s) are ready to ship.
Personal checks and money orders will have to clear the bank prior to shipping.
Paypal must be to confirmed addresses.

If you have any questions, just ask here on the forum or my email address.

Regards,
Frank

Flyrx7 · 07-02-2008, 02:15 AM

I sent out emails on 6/29/08 to the people at the top of the waiting list to let them know that the last batch was done and ready to ship. Check your emails and spam filters just in case you were one of them. I have received a couple bounces so far.....so bad luck for some means good luck for the next guy.

Also of note, I'm underway with the next batch of pods as we speak.
This batch will be about 80% +/- of the waiting list, 52mm, 60mm, Left hand and Right hand pods.
I'm still waiting for some supplies to come in over the next week, but I'm starting in with the materials I have on hand.

I'll post updates as they occur.

Regards,
Frank

Flyrx7 · 07-15-2008, 01:03 AM

7/14/08 Waiting List Update:

As it is now, 100% of the 52mm pods and close to 100% of the 60's are in production. I'm a few short on the 60's, but history has proven that not everyone on 'the list' follows through, so if you're on 'the list' at all, you're likely to be in the latest run. The wait shouldn't be long.

Also, I've sent out the 3rd round of emails on the latest batch of 52mm pods on 7/13/08.
I'm just waiting for the replies and confirmations. The next round of emails that will follow should complete the latest production run of 52mm pods. So if you've been on the list and haven't received an email yet, there may still be a chance (unless you want a quad, then, sadly, you must wait just a bit more)

As it stands at the moment, the LH52TP pods are nearly caught up to present as far as the Waiting List is concerned. Which means that that particular model # has nearly reached an "in stock" status. As many of you surely know, that hasn't occured for far too long.

On a final note, I do have a few extra RH52TP's in stock from the latest batch, so if anyone from across the pond is lurking, I've got you covered.

That pretty much covers the latest updates, except for maybe the LH52TP that will be up for the RCC Membership Raffle within the next few days or so (just got to iron out details, so stay tuned).

Regards,
Frank

Flyrx7 · 10-29-2008, 07:16 PM

Phew.......
Just winding down on my contract stuff now....finally!
I'll be starting up on pods again around the start of next week and they should start rolling out about a week or two after that.
While this current batch is the biggest I've had to do to date, there may still be some late comers that may not get a pod from this batch. It's close and too soon to call, but just wanted to mention that.

I'll have more concrete numbers and a clearer picture as soon as this batch gets done. Then I'll start on the next batch immediately thereafter for those that miss out.

Thanks for hangin' guys and gals!

Regards,
Frank

PS....still have alot of emails to respond to.....I haven't had the time to respond to those yet.

T2 Tsunami · 11-02-2008, 10:30 AM

Hey Frank, will you be sending e-mails out to those who are in this batch?, I'd like to get an idea of when to get ready for this project. Thanks Tony.

Flyrx7 · 11-08-2008, 10:41 AM

Quote:

Originally Posted by T2 Tsunami

Hey Frank, will you be sending e-mails out to those who are in this batch?, I'd like to get an idea of when to get ready for this project. Thanks Tony.

Tony, you can plan on your pod shipping begore the end of this month.

I will send out emails to everyone, but only after the batch is done.
Coming Monday we will be full time on pods for awhile, so there is some good news!

Regards,
Frank

Brent · 11-08-2008, 11:54 AM

I just received your email. Thanks alot Frank and I look forward to getting a pod!!

Brent

neit_jnf · 11-08-2008, 07:09 PM

the hometown webpage doesn't work anymore! any other place to see the pods info?

Flyrx7 · 11-12-2008, 03:24 AM

Quote:

Originally Posted by neit_jnf

the hometown webpage doesn't work anymore! any other place to see the pods info?

I'm in the process of building another webpage, flyrx7.com, but figured it could wait until I'm done with this batch at least.

If anyone is looking for a specific part# and need to see a pic let me know. I'll try to at least get a new thread going with part pics if the need is there.

Regards,
Frank

RX7ist · 11-18-2008, 03:01 AM

Frank,

I've been on the list and no email from you so far. Can you just keep me posted? I would really like to get my hands on these.

Thanks,

Flyrx7 · 11-18-2008, 10:45 AM

Quote:

Originally Posted by RX7ist

Frank,

I've been on the list and no email from you so far. Can you just keep me posted? I would really like to get my hands on these.

Thanks,

RX7ist,

Send me an email with your info as per the first post in this thread, I don't have your screen name noted on my list, but maybe as your name or email.

Thanks!
Frank

islanders_rx7 · 11-23-2008, 06:12 PM

Frank- Will I be able to get one by the end of the month too?

money · 11-26-2008, 01:57 AM

any update buddy??? i sent u an email too

neit_jnf · 11-29-2008, 05:20 PM

i want a 52mm Lhd 4-pod

T2 Tsunami · 11-30-2008, 08:36 PM

I hope everything is still as planned. End of the month is here.

07-02-2008, 02:15 AM	#1
Flyrx7 Rotary Fanatic Join Date: May 2008 Location: WA State iTrader: (2) Posts: 168 Rep Power: 17	Gauge Pod Updates and the Best Way for Ordering Gauge Pods How to order pods: - Send me an email @ flyrx7@aol.com with the gauge pod part # in the subject heading. See this thread for pictures and part nomenclature: http://rotarycarclub.com/rotary_foru...ead.php?t=5626 Within the email include: - Your name - Your forum ID - An email address to contact you by (if different than the one you're sending from). - Also let me know if you will require spacer rings. That's it. The reason that it has to be email is that it lessens the confusion for me and that is also how the Waiting List is formatted as well. All payment and shipping information is handled via email as well. If the pods are not in stock I will add you to a production waiting list Payment can be Paypal, personal checks and money orders. I'm in the process of setting up to receive credit cards too, but my bank is dragging their feet. All payments and shipping info will be handled once the pod(s) are ready to ship. Personal checks and money orders will have to clear the bank prior to shipping. Paypal must be to confirmed addresses. If you have any questions, just ask here on the forum or my email address. Regards, Frank Last edited by Flyrx7; 05-14-2009 at 09:52 AM..

11-08-2008, 11:54 AM	#7
Brent Sua Sponte Join Date: Feb 2008 Location: Killeen, TX iTrader: (4) Posts: 839 Rep Power: 17	I just received your email. Thanks alot Frank and I look forward to getting a pod!! Brent __________________ Road Atlanta August 2011 NASA TT 1:33 http://www.youtube.com/watch?v=IFY00PAK_Ps Traqmate's video of my car from the 2011 UTCC at VIR http://www.youtube.com/watch?v=2Zcn6...layer_embedded Video of Yellow LS1 FD at NASA TT at VIR http://www.youtube.com/watch?v=e6k0lJkcwrM

07-15-2008, 01:03 AM	#3
Flyrx7 Rotary Fanatic Join Date: May 2008 Location: WA State iTrader: (2) Posts: 168 Rep Power: 17	7/14/08 Waiting List Update: As it is now, 100% of the 52mm pods and close to 100% of the 60's are in production. I'm a few short on the 60's, but history has proven that not everyone on 'the list' follows through, so if you're on 'the list' at all, you're likely to be in the latest run. The wait shouldn't be long. Also, I've sent out the 3rd round of emails on the latest batch of 52mm pods on 7/13/08. I'm just waiting for the replies and confirmations. The next round of emails that will follow should complete the latest production run of 52mm pods. So if you've been on the list and haven't received an email yet, there may still be a chance (unless you want a quad, then, sadly, you must wait just a bit more) As it stands at the moment, the LH52TP pods are nearly caught up to present as far as the Waiting List is concerned. Which means that that particular model # has nearly reached an "in stock" status. As many of you surely know, that hasn't occured for far too long. On a final note, I do have a few extra RH52TP's in stock from the latest batch, so if anyone from across the pond is lurking, I've got you covered. That pretty much covers the latest updates, except for maybe the LH52TP that will be up for the RCC Membership Raffle within the next few days or so (just got to iron out details, so stay tuned). Regards, Frank

10-29-2008, 07:16 PM	#4
Flyrx7 Rotary Fanatic Join Date: May 2008 Location: WA State iTrader: (2) Posts: 168 Rep Power: 17	Phew....... Just winding down on my contract stuff now....finally! I'll be starting up on pods again around the start of next week and they should start rolling out about a week or two after that. While this current batch is the biggest I've had to do to date, there may still be some late comers that may not get a pod from this batch. It's close and too soon to call, but just wanted to mention that. I'll have more concrete numbers and a clearer picture as soon as this batch gets done. Then I'll start on the next batch immediately thereafter for those that miss out. Thanks for hangin' guys and gals! Regards, Frank PS....still have alot of emails to respond to.....I haven't had the time to respond to those yet.

11-02-2008, 10:30 AM	#5
T2 Tsunami The Newbie Join Date: May 2008 iTrader: (0) Posts: 10 Rep Power: 0	Hey Frank, will you be sending e-mails out to those who are in this batch?, I'd like to get an idea of when to get ready for this project. Thanks Tony.

11-08-2008, 07:09 PM	#8
neit_jnf Boricua! Join Date: Jul 2008 Location: Puerto Rico iTrader: (0) Posts: 99 Rep Power: 17	the hometown webpage doesn't work anymore! any other place to see the pods info?

11-18-2008, 03:01 AM	#10
RX7ist The Newbie Join Date: Aug 2008 iTrader: (0) Posts: 4 Rep Power: 0	Frank, I've been on the list and no email from you so far. Can you just keep me posted? I would really like to get my hands on these. Thanks,

11-23-2008, 06:12 PM	#12
islanders_rx7 The Newbie Join Date: Apr 2008 iTrader: (0) Posts: 6 Rep Power: 0	Frank- Will I be able to get one by the end of the month too?

11-26-2008, 01:57 AM	#13
money Rotary Fan in Training Join Date: Jul 2008 iTrader: (0) Posts: 39 Rep Power: 0	any update buddy??? i sent u an email too

11-29-2008, 05:20 PM	#14
neit_jnf Boricua! Join Date: Jul 2008 Location: Puerto Rico iTrader: (0) Posts: 99 Rep Power: 17	i want a 52mm Lhd 4-pod

11-30-2008, 08:36 PM	#15
T2 Tsunami The Newbie Join Date: May 2008 iTrader: (0) Posts: 10 Rep Power: 0	I hope everything is still as planned. End of the month is here.