GTUs 20B N/A Build Thread - Page 9

knonfs · 02-21-2012, 11:25 AM

Quote:

Originally Posted by Christopher W.

Ha, well another change!!

After getting one of the front Mariah fiberglass fenders widened it was decided....NO!

So no we rip up the original metal fenders. Luckily not on my dime but on Dougs!!

I have included Doug's comments with the photos.

"I think this will work better. After roughing in the custom fiberglass fender fattening, it became apparent that to get the right look we’d have to use the steel fenders. A more graceful line can be done this way, a look that’s truer to the original shape, and a perfect match to the rear."

"The rear of the fender gets relived vertically so that the original shape of the fender is maintained while allowing the flare to begin as subtly as possible."

Here is picture of the wheels I bought from Forgeline. It is their new GW3R wheel.

Front: 18x9 +23 Toyo R888 255/35R18
Rear: 18x11 +38 Toyo R888 295/30R18

That was a hard decision. At the very last minute...I mean last seconds of placing the order I went against my life long love of exposed bolts. I got the hidden option. I also got the center lock conversion.

This picture is a little darker than I am wanting but only one I have here.

The pictures I have been sent of the wheels on the car where with a camera phone and made the centers almost look blue. I am after a bright silver center section but not polished or machined and a polished lip. I have seen different pictures of the same wheels and some they look almost gun metal (I don't want) and sometimes they look bright silver. If I don't like it I send them back and change the color for $80.00 a wheel. I will know for sure when I go pick up the car to take it to Defined.

BADASS, especially those wheels

Christopher W. · 02-21-2012, 01:39 PM

Thanks for the comments!!

DGRR would be nice. Ha, good dead line to give to Logan at Defined.

The body work won't be much longer at all. The whole car is already painted except for the front fenders.

Now that Logan has the intake figured out basically all that has to be done is get the intake made and installed. I am not sure where he is right now with the slide throttles but I imagine still in the process. But then I have to go and put 800-900 or so miles on it, get it dynoed and dialed in, get all the little punch list stuff done. I don't know if that is actually possible by then.

I gave up self induced dead lines long ago. They bring on nothing but tension..

RCCAZ 1 · 02-21-2012, 05:58 PM

What's your horsepower goal with Logan. Something in the 375 RWHP range??

Christopher W. · 02-21-2012, 06:27 PM

Quote:

Originally Posted by RCCAZ 1

What's your horsepower goal with Logan. Something in the 375 RWHP range??

Heh, heh..

We started out conservatively thinking around 350rwhp. I have basically left my car unfinished with Logan..other than the trip to St. Louis for the paint and body, for about two years.

The entire reason for just leaving it there is because Logan continued to make more and more HP. He now has his 20B FD making 475rwhp. But he is dry sumped and running up to 10k rpm. I am wet and going to 9k rpm.

You might of missed this thread on this forum and Logan has others on the other forum. He made 475 rwhp on a Dynapack dyno!!

http://rotarycarclub.com/rotary_foru...ad.php?t=15079

or

http://rotarycarclub.com/rotary_foru...ad.php?t=15078

The other difference is my setup probably won't have the external mounted injectors. But what you see in his thread is basically my setup to come. He still has to get the slide throttles functional for daily use but that is coming together as well.

Logan, who is pretty conservative, said that I could look for between 425 and 450rwhp with the lastest setup.

I think it has been worth the wait on possibly gaining 75 to 100 more HP than originally thought.

I don't care if he is still finding more hp. I am ready for my car!!

RCCAZ 1 · 02-21-2012, 10:32 PM

Yes, I was aware that he was close to 500 RWHP, but also knew he was "cutting edge" with dry sump, tuned exhaust, 10K rpm and all of the other stops pulled out. Just wasn't sure how many of those things you planned to incorporate. 425 to 450 will be incredible. I think Logan needs to offer a "group buy" on 400+ HP 3 rotor engine builds, then crank out 5 to 10 in parallel builds

FDDandata · 02-22-2012, 09:29 PM

this is inspirational!!... but what good is being inspired with no money lol. Cant wait to see pics of the finished results, especially the dyno #s. Im feeling the whole build inside and out. Hopefully you get to make DGRR 12 cuz looks like you got plenty of people thats gonna be on the lookout for your car in particular

gmonsen · 02-23-2012, 12:06 PM

Chris... Looking great. PM me when you have a minute.

RCCAZ1... Right. Logan should do a group buy.

Gordon

RX-7FD3S · 04-12-2012, 09:30 AM

nononono. i read this entire tread in the hopes to se it finnished and running on the last page, get this thing dooone

dying to hear it brap

Oyvindjs · 04-12-2012, 10:40 AM

^^this

Christopher W. · 04-12-2012, 04:34 PM

Get it done!! Tell me about it.

The guy's shop doing the paint and body work had the employee doing the work on my car quit after ten years. He is having to pull another guy off of other projects to finish it. There is no hurry to get it to Logan's until the middle of May. Logan has three long term projects leaving in the next three weeks.

Logan is still finding new and bad ass ways to increase power. I actually talked to him today. I think we might open my engine back up and do some of his new stuff to the internals.

As long as I have it back by August I am good....hell I am good no matter!!

general7 · 04-14-2012, 10:09 AM

Great looking project, gonna follow this one!

Christopher W. · 04-18-2012, 10:37 PM

Quote:

Originally Posted by Christopher W.

Logan is still finding new and bad ass ways to increase power. I actually talked to him today. I think we might open my engine back up and do some of his new stuff to the internals.

I retract that statement. I am not going to do anything to slow down getting my car back.

There will always be more HP to be had. I am just ready to drive my car.

By the way, it has always been my doing that pushed this project to such a long overdue completion. Just didn't want anyone to think Logan was the reason. I just always wanted more power.

Part of the sickness I guess..

Christopher W. · 10-16-2012, 10:49 PM

My car is finally being worked on again.

Here is a link to the progress....too lazy to post the individual pictures..

http://dougjenkinsgarage.com/blog/category/mazdarx7/

MazdaMike · 10-23-2012, 02:54 PM

This thread is amazing, your basically building my dream FC (as long as it remains red).

Can't wait to see more progress.

Christopher W. · 11-25-2012, 08:47 PM

I keep getting these crappy camera phone pictures from my car's hostage taker. I already paid the ransom..... I am guessing in a couple of weeks the car will finally be at Logan's.

Was told four months......here we are 1.5 years later. F%$K that $h(t. This is completely unacceptable. This work better be PERFECT. I think it will be but no more hostage taking of my cars.

BIGGEST LESSON....DON'T PAY FOR ANYTHING...EXCEPT PARTS UNTIL THE WORK IS DONE. IF THEY CAN'T WORK WITH THAT THEN GO SOMEWHERE ELSE.

All that being said.....it does look pretty sick!!

02-23-2012, 12:06 PM	#127
gmonsen The Ancient One Join Date: Mar 2008 Location: Eastern Pennsylvania Posts: 144 Rep Power: 18	Chris... Looking great. PM me when you have a minute. RCCAZ1... Right. Logan should do a group buy. Gordon __________________ 1993 Rx7 R1 20b NA 1994 Rx7 20b supercharged project 1991 BMW 850 6 speed 1991 BMW E30 M3 Evo II

04-12-2012, 09:30 AM	#128
RX-7FD3S Bartemann Join Date: Aug 2010 Location: Norway Posts: 22 Rep Power: 0	nononono. i read this entire tread in the hopes to se it finnished and running on the last page, get this thing dooone dying to hear it brap __________________ 1992 Rx-7 Type R1 1978 mazda RX-4 WAGON antrasite/black edition carbody+fiberglass=boat Driving a LHD RX7 is like jerking of with your left hand. It can be done, but it just doesnt feel right the RX7`s: FB:financial burden FC: financial Crisis FD: financial disaste my rides: http://www.mazda-ogn.org/phpBB3/view...p?f=17&t=20083 http://www.mazda-ogn.org/phpBB3/view...hp?f=17&t=5233

10-23-2012, 02:54 PM	#134
MazdaMike S4 Owner Join Date: Jun 2008 Location: Tottenham, ON, Canada Posts: 48 Rep Power: 0	This thread is amazing, your basically building my dream FC (as long as it remains red). Can't wait to see more progress. __________________ 1985 Mazda RX7 GSL 13B, Holley etc 1997 Mazda MX6 LS - DD lowered on 17s

02-21-2012, 01:39 PM	#122
Christopher W. Rotary Fan in Training Join Date: Mar 2008 Posts: 98 Rep Power: 18	Thanks for the comments!! DGRR would be nice. Ha, good dead line to give to Logan at Defined. The body work won't be much longer at all. The whole car is already painted except for the front fenders. Now that Logan has the intake figured out basically all that has to be done is get the intake made and installed. I am not sure where he is right now with the slide throttles but I imagine still in the process. But then I have to go and put 800-900 or so miles on it, get it dynoed and dialed in, get all the little punch list stuff done. I don't know if that is actually possible by then. I gave up self induced dead lines long ago. They bring on nothing but tension..

02-21-2012, 05:58 PM	#123
RCCAZ 1 Rotary Fanatic Join Date: Mar 2008 Location: Phoenix, AZ Posts: 288 Rep Power: 18	What's your horsepower goal with Logan. Something in the 375 RWHP range??

02-21-2012, 10:32 PM	#125
RCCAZ 1 Rotary Fanatic Join Date: Mar 2008 Location: Phoenix, AZ Posts: 288 Rep Power: 18	Yes, I was aware that he was close to 500 RWHP, but also knew he was "cutting edge" with dry sump, tuned exhaust, 10K rpm and all of the other stops pulled out. Just wasn't sure how many of those things you planned to incorporate. 425 to 450 will be incredible. I think Logan needs to offer a "group buy" on 400+ HP 3 rotor engine builds, then crank out 5 to 10 in parallel builds

02-22-2012, 09:29 PM	#126
FDDandata The Newbie Join Date: Dec 2009 Location: Brooklyn, NY Posts: 27 Rep Power: 0	this is inspirational!!... but what good is being inspired with no money lol. Cant wait to see pics of the finished results, especially the dyno #s. Im feeling the whole build inside and out. Hopefully you get to make DGRR 12 cuz looks like you got plenty of people thats gonna be on the lookout for your car in particular

04-12-2012, 10:40 AM	#129
Oyvindjs Rotary Fan in Training Join Date: Apr 2012 Posts: 78 Rep Power: 14	^^this

04-12-2012, 04:34 PM	#130
Christopher W. Rotary Fan in Training Join Date: Mar 2008 Posts: 98 Rep Power: 18	Get it done!! Tell me about it. The guy's shop doing the paint and body work had the employee doing the work on my car quit after ten years. He is having to pull another guy off of other projects to finish it. There is no hurry to get it to Logan's until the middle of May. Logan has three long term projects leaving in the next three weeks. Logan is still finding new and bad ass ways to increase power. I actually talked to him today. I think we might open my engine back up and do some of his new stuff to the internals. As long as I have it back by August I am good....hell I am good no matter!!

04-14-2012, 10:09 AM	#131
general7 The Newbie Join Date: Apr 2012 Posts: 22 Rep Power: 0	Great looking project, gonna follow this one!

10-16-2012, 10:49 PM	#133
Christopher W. Rotary Fan in Training Join Date: Mar 2008 Posts: 98 Rep Power: 18	My car is finally being worked on again. Here is a link to the progress....too lazy to post the individual pictures.. http://dougjenkinsgarage.com/blog/category/mazdarx7/

11-25-2012, 08:47 PM	#135
Christopher W. Rotary Fan in Training Join Date: Mar 2008 Posts: 98 Rep Power: 18	I keep getting these crappy camera phone pictures from my car's hostage taker. I already paid the ransom..... I am guessing in a couple of weeks the car will finally be at Logan's. Was told four months......here we are 1.5 years later. F%$K that $h(t. This is completely unacceptable. This work better be PERFECT. I think it will be but no more hostage taking of my cars. BIGGEST LESSON....DON'T PAY FOR ANYTHING...EXCEPT PARTS UNTIL THE WORK IS DONE. IF THEY CAN'T WORK WITH THAT THEN GO SOMEWHERE ELSE. All that being said.....it does look pretty sick!!