Diary of a Madman; TitaniumTT's see you @ DGRRXI RE-REbuild

***TitaniumTT*** · 05-22-2011, 08:54 PM

Quote:

Originally Posted by mazpower

Nice pic!

Yeah... She done GOOD with that one! A bunch of others too... maybe one of these days I'll resize and post them

***TitaniumTT*** · 05-22-2011, 08:55 PM

Quote:

Originally Posted by WE3RX7

This is true. How do you define done? I have a feeling it'll never be done. On the good side though, I didn't make that big purchase this weekend so I should be giving you a call early this week. Need to get moving on the stopping.

True... true.... my FC will never be done..... how about DRIVEABLE????? AT LEAST???

Call... call away. I've got nothing but good news and a little tip that I knew about, but wish I had remembered before I used them...

2gslse · 05-22-2011, 08:58 PM

As of lately.... none!! What are you looking to get done?

maybe get you to do the pipework for the exhaust/intercooler and the fenderbraces or frame braces we talked about a long time ago. I am going to try to keep my A/C so the intercooler pipes may be tricky but won't know till it goes in the hole.

sequentially too?

I don't know never met the guy but will find out when I do.

***TitaniumTT*** · 05-22-2011, 08:58 PM

Quote:

Originally Posted by 2gslse

And when you get to the bottom of the driveway are we just going to keep PUSHING it back into the garage so you can roll outside and try the brakes again?

He better make sure he get's those rotors plated so they don't rot away just sitting there

2gslse · 05-22-2011, 09:05 PM

Quote:

Originally Posted by TitaniumTT

He better make sure he get's those rotors plated so they don't rot away just sitting there

Do you think we could pull it across the dragon with a tow strap?

***TitaniumTT*** · 05-22-2011, 09:10 PM

Quote:

Originally Posted by 2gslse

maybe get you to do the pipework for the exhaust/intercooler and the fenderbraces or frame braces we talked about a long time ago. I am going to try to keep my A/C so the intercooler pipes may be tricky but won't know till it goes in the hole.

I don't know never met the guy but will find out when I do.

I'd be curious to know for sure..........

We can definately work something out, just a matter of getting the timeline worked out.

My FC should be out of the garage in a week or 2, assuming I can start getting my ass up early enough to do some work before I have to go to work. THe Landi should be out in a few weeks as well.... I hope.... Colins Twin-Charged FD is coming in the next few weeks so we can haul the engine, repair the leaky pan, redo some plumbing, paint the bay, a few other things as well, the 'vert is going into the shop as soon as my FC is done so I can the process of re-doing the interior, rebuilding a turbo engine and swapping that in with an a2w intercooler...... Oh my... I need a clone or to get myself back on that, "I only need 4 hrs of sleep" kick again

***TitaniumTT*** · 05-22-2011, 09:12 PM

Quote:

Originally Posted by 2gslse

Do you think we could pull it across the dragon with a tow strap?

As long as we use one of our rotaries..... we've got the torque to do it

2gslse · 05-22-2011, 09:19 PM

What turbo you using on the vert? when is the FD project?

We can definately work something out, just a matter of getting the timeline worked out.

timeline is easy on my end I am in no rush thats why its not done yet. I may bolt a set of webers on it to test the engine and break it in so when I'm ready to go so is the engine I had to baby my FD for so long (2500miles)on a base map before I could get it tuned it was killing me and it was in '03 or '04 so everyone wanted to race.

***TitaniumTT*** · 05-22-2011, 09:27 PM

Stock turbo for the time being.... I may upgrade it to a BNR Stg 1 or 2. There will also be some sort of ECU from the get go.... still trying to decide between a bitchin deal on an RTek or a hellteck SRE..

Oh shit that's right.... I own an FD too don't I????

2gslse · 05-22-2011, 09:33 PM

S4 or S5 turbo? do you already have one?
just get the haltech you know you want to the r-tek would use an old ratty harness and be more limiting in the long run although limiting may be a good thing so you will leave it alone.

***TitaniumTT*** · 05-22-2011, 09:43 PM

S5, I don't, but I should have one by the end of the week. I've spoken to a seller and we just need to confirm a few things and then I'll be picking it up hopefully sometime this week.

Yeah I know what you mean. It's not a matter of leaving it alone, it's a matter of it's not for me. B-Day gift for my mother so reliabilty is tops on the list..... although I SHOULD do the helltech so I can do some serious data-logging with the A2W intercooler so I can figure a few things out for a future project

2gslse · 05-22-2011, 09:47 PM

If it falls through on the turbo I can hook you up I think I have 2 of them since its how I was originally going to go with the FB

since its for Mom and not you why air to H2O intercooler? seems to be asking for trouble to me

***TitaniumTT*** · 05-22-2011, 10:12 PM

Ok... so I've been slacking in the picture dept... but only in that dept..... So here to appease hades.... pics of the front brakes. And the most AWESOME license plate frame I've ever owned. Tomorrow... hopefully we can move onto the Master Cylinder, then the traction control, then the belly pan, then maybe some new tools will be in....

Sooooooooooooooooooo...... these rotors are bigger in diameter than some wheels

Stock size rotor on the top, and that'll end up on the 'vert along with the pads that I've loved for a LONG ass time.

And they're only slightly thicker. They measure in @ 13.25"x1.25" DAYUM!!!

New calipers. Wilwood Superlite 6-piston cali's. Go big or go home... and these are HUGE! And they look pretty good too

Just slightly wider to accomodate the thicker rotors and much thicker pads....

And here's what came with the kit. A set of Coleman rotors and custom FastBrakes hats. A fw fittings as well. The cali's didn't come with the kit, I have a good friend who is a Wilwood dealer

I got a good deal on those. The brackets... which I don't have pics of, are SUBSTANTIAL. Mounting is kind of a PITA though because of where the threads are located. The bolts must go from the cali into the bracket, and then the bracket mounts to the knuckle. Not a big deal, just a little different.

Notice the distance between the studs and the cali

Oh, and look at that monstore gap between the outside of the cali and the inner diameter of the wheel. Laughable!!!

Slight difference

Yeah... WHAT space!!!!! I actually needed to get a 5mm spacer to offset the wheel enough to clear. I'm not a spacer guy and thought about getting the Superlits Narrows.... but the stance is more aestetically pleasing and she seems to handle the wider stance a wee bit better so we're gonna keep it this way.

Yeah, it ACTUALLY spins... I was pleased

Now, with a bunch of extra stuff being up in that area, we needed a way to keep them all from getting mangled. I've got 12" flex lines that replaced the factory hardline from the strut to the cali. I've also got a 3-core shielded tefzel wire for the traction control as well. In the past, I just had the traction control wire ziptied to the hardline. Obviously can't do that here.... so I cut the tabs off the old old OLD ass struts and built this little piece.

Then I torched and bent it around a tube .25" bigger than the c/o so I could pad it on the inside

And here it is being test fitted with a much shorter line. You'll also note the super sexy little mounting tab specifically for the deutsch connectors..... yup yup!

And to think I put off building that little piece for 3 years and the whole thing was done, both pieces and powdercoated in like 90 minutes... I suck sometimes.

Happy hades?

***TitaniumTT*** · 05-22-2011, 10:16 PM

More pics..... see the above.... I'm slick like that....

***TitaniumTT*** · 05-22-2011, 10:17 PM

still slick

05-22-2011, 08:58 PM	#1188
2gslse Rotary Fanatic Join Date: Apr 2008 Location: front royal va iTrader: (0) Posts: 440 Rep Power: 17	As of lately.... none!! What are you looking to get done? maybe get you to do the pipework for the exhaust/intercooler and the fenderbraces or frame braces we talked about a long time ago. I am going to try to keep my A/C so the intercooler pipes may be tricky but won't know till it goes in the hole. sequentially too? I don't know never met the guy but will find out when I do. __________________ ____________________________________________ 1976 Cosmo needing lots of work 1993 Rx-7 410 RWHP single turbo toy 1985 Rx-7 toy/project car 411HP stoplight terror 2001 Dodge ram 4wd.parts hauler 2016 Ram 2500 cause its a hemi 2006 VW TDI commuter __________________________________________ I guarantee there's a pregnant redneck teenager somewhere in a shitty trailer park that thinks "Ebola would be a lovely name for their child"...

05-22-2011, 09:19 PM	#1193
2gslse Rotary Fanatic Join Date: Apr 2008 Location: front royal va iTrader: (0) Posts: 440 Rep Power: 17	What turbo you using on the vert? when is the FD project? We can definately work something out, just a matter of getting the timeline worked out. timeline is easy on my end I am in no rush thats why its not done yet. I may bolt a set of webers on it to test the engine and break it in so when I'm ready to go so is the engine I had to baby my FD for so long (2500miles)on a base map before I could get it tuned it was killing me and it was in '03 or '04 so everyone wanted to race. __________________ ____________________________________________ 1976 Cosmo needing lots of work 1993 Rx-7 410 RWHP single turbo toy 1985 Rx-7 toy/project car 411HP stoplight terror 2001 Dodge ram 4wd.parts hauler 2016 Ram 2500 cause its a hemi 2006 VW TDI commuter __________________________________________ I guarantee there's a pregnant redneck teenager somewhere in a shitty trailer park that thinks "Ebola would be a lovely name for their child"... Last edited by 2gslse; 05-22-2011 at 09:24 PM..

05-22-2011, 09:27 PM	#1194
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Stock turbo for the time being.... I may upgrade it to a BNR Stg 1 or 2. There will also be some sort of ECU from the get go.... still trying to decide between a bitchin deal on an RTek or a hellteck SRE.. Oh shit that's right.... I own an FD too don't I???? __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

05-22-2011, 09:33 PM	#1195
2gslse Rotary Fanatic Join Date: Apr 2008 Location: front royal va iTrader: (0) Posts: 440 Rep Power: 17	S4 or S5 turbo? do you already have one? just get the haltech you know you want to the r-tek would use an old ratty harness and be more limiting in the long run although limiting may be a good thing so you will leave it alone. __________________ ____________________________________________ 1976 Cosmo needing lots of work 1993 Rx-7 410 RWHP single turbo toy 1985 Rx-7 toy/project car 411HP stoplight terror 2001 Dodge ram 4wd.parts hauler 2016 Ram 2500 cause its a hemi 2006 VW TDI commuter __________________________________________ I guarantee there's a pregnant redneck teenager somewhere in a shitty trailer park that thinks "Ebola would be a lovely name for their child"...

05-22-2011, 09:43 PM	#1196
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	S5, I don't, but I should have one by the end of the week. I've spoken to a seller and we just need to confirm a few things and then I'll be picking it up hopefully sometime this week. Yeah I know what you mean. It's not a matter of leaving it alone, it's a matter of it's not for me. B-Day gift for my mother so reliabilty is tops on the list..... although I SHOULD do the helltech so I can do some serious data-logging with the A2W intercooler so I can figure a few things out for a future project __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

05-22-2011, 09:47 PM	#1197
2gslse Rotary Fanatic Join Date: Apr 2008 Location: front royal va iTrader: (0) Posts: 440 Rep Power: 17	If it falls through on the turbo I can hook you up I think I have 2 of them since its how I was originally going to go with the FB since its for Mom and not you why air to H2O intercooler? seems to be asking for trouble to me __________________ ____________________________________________ 1976 Cosmo needing lots of work 1993 Rx-7 410 RWHP single turbo toy 1985 Rx-7 toy/project car 411HP stoplight terror 2001 Dodge ram 4wd.parts hauler 2016 Ram 2500 cause its a hemi 2006 VW TDI commuter __________________________________________ I guarantee there's a pregnant redneck teenager somewhere in a shitty trailer park that thinks "Ebola would be a lovely name for their child"...