Re-chromed rotor housings

speedjunkie · 06-26-2012, 01:47 AM

Ok I'll take some pics tomorrow if I can remember and send them to you. Thanks!

I'm in need of housings right now though, in case you have some good ones you can spare lol.

speedjunkie · 06-26-2012, 11:52 PM

Here are pics of my housings. Also, these have not been cleaned up aside from just a simple wipe down. They haven't been touched for over a year.

First housing...

Second housing...

glassman · 07-18-2012, 02:52 AM

Not much for us left to do for us to get this going. Some welding and some fitment then we can do a mock up.
Will keep everyone posted

glassman · 12-07-2012, 02:45 PM

I've been working on it for the last two days getting everything fitted just nice

This baby is just about ready for our trials.
Stay tuned for the next update

banzaitoyota · 12-07-2012, 03:27 PM

Looking forward to it

GySgtFrank · 12-07-2012, 03:32 PM

DriFD3S · 12-07-2012, 09:27 PM

I bet they will look great!

glassman · 01-05-2013, 07:00 PM

I'm extremely happy to report that we are finished!

I'll be taking the 2 FD housings SFD01 and SFD02 on Monday to get chromed next week.

Of course pics will be posted as soon as they are done.
Happy Trails!

speedjunkie · 01-05-2013, 10:18 PM

Sweet!

glassman · 01-23-2013, 09:12 PM

I had 3 tweaks to do, the last tweak is finished and we will be setting up Friday to start chroming my 2 FD housings SFD01 and SDFD02 as in the pictures posted previously.

glassman · 01-27-2013, 04:31 PM

Dropped everything off on Friday but my guy had gone home for the weekend so we will begin first thing Monday.
Pics to come soon.

glassman · 01-28-2013, 10:30 PM

The shop is very busy this time of year, lots to get out before break-up being that we are in oil country.
We'll have them finished by weeks end.

Tanj! · 03-01-2013, 04:36 PM

Updates?

glassman · 03-04-2013, 09:49 PM

Yea, normally it is a very slow time of the year for my shop but they have been flooded with business non stop.
We have to do a complete change on the set-up which takes a day to do and he has to get everything off his plate to do so.

Once our trial is complete we will look at getting a dedicated set-up just for housings. We want to eventually set-up to do 4 housings at a time or more.

Everything is ready to go I'm just waiting for the phone call.

glassman · 06-05-2013, 12:57 PM

Well, still waiting for the call. Hopefully it will be soon. Just talked to him today and once he gets a certain job done we can begin.

07-18-2012, 02:52 AM	#93
glassman Premium Vendor Join Date: Apr 2008 Location: Canada iTrader: (0) Posts: 173 Rep Power: 17	Not much for us left to do for us to get this going. Some welding and some fitment then we can do a mock up. Will keep everyone posted __________________ Mild to wild, street to strip, when you want to go fast and you want your engine to last, NRS Ceramics is the only way to go. NRS Rotorsports nrsrotorsports@shaw.ca www.nrsrotorsports.com

12-07-2012, 02:45 PM	#94
glassman Premium Vendor Join Date: Apr 2008 Location: Canada iTrader: (0) Posts: 173 Rep Power: 17	I've been working on it for the last two days getting everything fitted just nice This baby is just about ready for our trials. Stay tuned for the next update __________________ Mild to wild, street to strip, when you want to go fast and you want your engine to last, NRS Ceramics is the only way to go. NRS Rotorsports nrsrotorsports@shaw.ca www.nrsrotorsports.com

12-07-2012, 03:27 PM	#95
banzaitoyota Rotary Fanatic Join Date: Feb 2008 iTrader: (0) Posts: 201 Rep Power: 17	Looking forward to it __________________ My deuce

12-07-2012, 03:32 PM	#96
GySgtFrank Professional Stick Poker Join Date: Feb 2011 Location: Stafford, Ks. iTrader: (0) Posts: 1,005 Rep Power: 15	__________________ 1979 SA22C (parts of one anyway) http://rotarycarclub.com/rotary_foru...ad.php?t=15585 1975 MG Midget (building) http://rotarycarclub.com/rotary_foru...ad.php?t=18681 1988 N/A SE model FC, dead stock and less than 85k on the clock. This one actually runs, so I don't fuck with it.

12-07-2012, 09:27 PM	#97
DriFD3S Rotary Fanatic Join Date: Jan 2009 Location: Edmonton, AB, Canada iTrader: (0) Posts: 174 Rep Power: 0	I bet they will look great! __________________ *Live the DriFD3S or die trying.* JDM True Story. the Vacuum line, to my MAP became detached while I was legally drifting. my engine would not rev past 2500, and idled from 300-650 and was stalling. Fortunately, I acquired a Zip-Tie. I fixed a catastrophic engine failure, With a Zip-Tie. JDM FTW.

06-26-2012, 01:47 AM	#91
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO iTrader: (1) Posts: 2,089 Rep Power: 19	Ok I'll take some pics tomorrow if I can remember and send them to you. Thanks! I'm in need of housings right now though, in case you have some good ones you can spare lol.

06-26-2012, 11:52 PM	#92
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO iTrader: (1) Posts: 2,089 Rep Power: 19	Here are pics of my housings. Also, these have not been cleaned up aside from just a simple wipe down. They haven't been touched for over a year. First housing... Second housing...

01-05-2013, 07:00 PM	#98
glassman Premium Vendor Join Date: Apr 2008 Location: Canada iTrader: (0) Posts: 173 Rep Power: 17	I'm extremely happy to report that we are finished! I'll be taking the 2 FD housings SFD01 and SFD02 on Monday to get chromed next week. Of course pics will be posted as soon as they are done. Happy Trails! __________________ Mild to wild, street to strip, when you want to go fast and you want your engine to last, NRS Ceramics is the only way to go. NRS Rotorsports nrsrotorsports@shaw.ca www.nrsrotorsports.com

01-05-2013, 10:18 PM	#99
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO iTrader: (1) Posts: 2,089 Rep Power: 19	Sweet!

01-23-2013, 09:12 PM	#100
glassman Premium Vendor Join Date: Apr 2008 Location: Canada iTrader: (0) Posts: 173 Rep Power: 17	I had 3 tweaks to do, the last tweak is finished and we will be setting up Friday to start chroming my 2 FD housings SFD01 and SDFD02 as in the pictures posted previously. __________________ Mild to wild, street to strip, when you want to go fast and you want your engine to last, NRS Ceramics is the only way to go. NRS Rotorsports nrsrotorsports@shaw.ca www.nrsrotorsports.com

01-27-2013, 04:31 PM	#101
glassman Premium Vendor Join Date: Apr 2008 Location: Canada iTrader: (0) Posts: 173 Rep Power: 17	Dropped everything off on Friday but my guy had gone home for the weekend so we will begin first thing Monday. Pics to come soon. __________________ Mild to wild, street to strip, when you want to go fast and you want your engine to last, NRS Ceramics is the only way to go. NRS Rotorsports nrsrotorsports@shaw.ca www.nrsrotorsports.com

01-28-2013, 10:30 PM	#102
glassman Premium Vendor Join Date: Apr 2008 Location: Canada iTrader: (0) Posts: 173 Rep Power: 17	The shop is very busy this time of year, lots to get out before break-up being that we are in oil country. We'll have them finished by weeks end. __________________ Mild to wild, street to strip, when you want to go fast and you want your engine to last, NRS Ceramics is the only way to go. NRS Rotorsports nrsrotorsports@shaw.ca www.nrsrotorsports.com

03-01-2013, 04:36 PM	#103
Tanj! Rotary Fan in Training Join Date: Feb 2008 Location: Dallas, TX iTrader: (0) Posts: 44 Rep Power: 0	Updates?

03-04-2013, 09:49 PM	#104
glassman Premium Vendor Join Date: Apr 2008 Location: Canada iTrader: (0) Posts: 173 Rep Power: 17	Yea, normally it is a very slow time of the year for my shop but they have been flooded with business non stop. We have to do a complete change on the set-up which takes a day to do and he has to get everything off his plate to do so. Once our trial is complete we will look at getting a dedicated set-up just for housings. We want to eventually set-up to do 4 housings at a time or more. Everything is ready to go I'm just waiting for the phone call. __________________ Mild to wild, street to strip, when you want to go fast and you want your engine to last, NRS Ceramics is the only way to go. NRS Rotorsports nrsrotorsports@shaw.ca www.nrsrotorsports.com

06-05-2013, 12:57 PM	#105
glassman Premium Vendor Join Date: Apr 2008 Location: Canada iTrader: (0) Posts: 173 Rep Power: 17	Well, still waiting for the call. Hopefully it will be soon. Just talked to him today and once he gets a certain job done we can begin. __________________ Mild to wild, street to strip, when you want to go fast and you want your engine to last, NRS Ceramics is the only way to go. NRS Rotorsports nrsrotorsports@shaw.ca www.nrsrotorsports.com