|
![]() |
#1 |
600rwhp club member.
Join Date: Mar 2008
Posts: 551
Rep Power: 18 ![]() |
Have fun, glad someone is able to make some passes! I am dying to get back on the track!
|
![]() |
![]() |
![]() |
#2 |
Senior Member/Lounge Rat
Join Date: Mar 2008
Location: Corbin, KY
Posts: 296
Rep Power: 18 ![]() |
I'm hoping to be able to run a mid to high 15, think I'm aiming too high?
|
![]() |
![]() |
![]() |
#3 |
Rotary Fan in Training
Join Date: Mar 2008
Posts: 55
Rep Power: 18 ![]() |
Thanks for the kind words guys, im doing fine and needed to get out so i went to midnite drags!
I will post slips later but: #1 1.92 60ft 11.22et 126.51mph #2 1.64 60ft 10.96et 127.94mph #3 1.72 60ft 10.99et 128.94mph #4 1.60 60ft 10.95et 129.46mph Not my best but pretty consistant. I was also worried about breaking becouse my tralior is in memphis at the lxs event with a 10.3 sec blk vett setting on it! The mph is up to almost 130mph but im going to have to let it all hang out to get the new gears to 60ft better! And if zinx stays # 1 thats ok but im trying in a good way! Sk8world come on and get that car going. ![]() Thanks again for the kind words it helps alot! ![]()
__________________
93 fd 10.87ET 1.52 60ft 126 MPH 500 H/P on 93 pump only ![]() |
![]() |
![]() |
![]() |
#4 | |
600rwhp club member.
Join Date: Mar 2008
Posts: 551
Rep Power: 18 ![]() |
Quote:
Believe me I am trying! I may even trailer it up to a shop ifi do not get it figured out. I am way over due for some seat time..... BTW.. Nice passes and very consistant! |
|
![]() |
![]() |
![]() |
#5 |
Rotary Fan in Training
Join Date: Mar 2008
Posts: 55
Rep Power: 18 ![]() |
I think if i wasnt afraid to launch harder it would have been in the 10.7's.
Keep us informed and good luck.
__________________
93 fd 10.87ET 1.52 60ft 126 MPH 500 H/P on 93 pump only ![]() |
![]() |
![]() |
![]() |
#6 |
Rotary Fan in Training
Join Date: Mar 2008
Posts: 55
Rep Power: 18 ![]() |
One of the runs
Here is one of the runs!
http://www.youtube.com/watch?v=omr1HxIeSRQ What do you think? Needs more RPM'S right. ![]()
__________________
93 fd 10.87ET 1.52 60ft 126 MPH 500 H/P on 93 pump only ![]() |
![]() |
![]() |
![]() |
#7 |
RCC Contributor
Join Date: Feb 2008
Location: WA State
Posts: 651
Rep Power: 18 ![]() |
Hey we trust you, it's just nice to see the slips
![]()
__________________
Michael Pinto 2008 PDXCGP Drag Racing Season Champion 83 RX-7 GSL; 12A/5-Speed, Red/Red; 100% Stock - 16.072@83.39 01 CV Police Interceptor; 4.6 SOHC V8/4R70W, Dk Blue/Grey; K&N FIPK/RP Oil/Optima/Superchips/Flowmaster 40's/2.5" cat-back - 14.854@92.37 Read my Rx-7 Build Thread! http://rotarycarclub.com/rotary_foru...ed=1#post70955 Get on the new RCC 1/4 Mile ET List! http://www.rotarycarclub.com/rotary_...read.php?t=368 Vote for the ROTM! http://rotarycarclub.com/rotary_foru...play.php?f=125 |
![]() |
![]() |
![]() |
#8 |
Rotary Fan in Training
Join Date: Mar 2008
Posts: 55
Rep Power: 18 ![]() |
Makes you feel younger!
Turns out i had the fastest time there last night, that doesant happen very often! I want to see some of your time slips before the snow tire nationals! ![]()
__________________
93 fd 10.87ET 1.52 60ft 126 MPH 500 H/P on 93 pump only ![]() |
![]() |
![]() |
![]() |
#9 |
600rwhp club member.
Join Date: Mar 2008
Posts: 551
Rep Power: 18 ![]() |
That looked like a nice launch! Nice squat! You consider coming down for SFS event in 2 weeks? Ernie T will be there!
|
![]() |
![]() |
![]() |
#10 | |
Rotary Fan in Training
Join Date: Mar 2008
Posts: 55
Rep Power: 18 ![]() |
Quote:
![]()
__________________
93 fd 10.87ET 1.52 60ft 126 MPH 500 H/P on 93 pump only ![]() |
|
![]() |
![]() |
![]() |
#11 |
RCC Contributor
Join Date: Feb 2008
Location: WA State
Posts: 651
Rep Power: 18 ![]() |
Hey busted, I added your best time from the Test&Tune. Could you please make a post of your major mods and what engine/trans/etc you are running? A slip would be nice as well. Thanks!
__________________
Michael Pinto 2008 PDXCGP Drag Racing Season Champion 83 RX-7 GSL; 12A/5-Speed, Red/Red; 100% Stock - 16.072@83.39 01 CV Police Interceptor; 4.6 SOHC V8/4R70W, Dk Blue/Grey; K&N FIPK/RP Oil/Optima/Superchips/Flowmaster 40's/2.5" cat-back - 14.854@92.37 Read my Rx-7 Build Thread! http://rotarycarclub.com/rotary_foru...ed=1#post70955 Get on the new RCC 1/4 Mile ET List! http://www.rotarycarclub.com/rotary_...read.php?t=368 Vote for the ROTM! http://rotarycarclub.com/rotary_foru...play.php?f=125 |
![]() |
![]() |
![]() |
#12 |
600rwhp club member.
Join Date: Mar 2008
Posts: 551
Rep Power: 18 ![]() |
|
![]() |
![]() |
![]() |
#13 |
Rotary Fanatic
Join Date: Feb 2008
Location: HuntsVEGAS
Posts: 249
Rep Power: 18 ![]() |
My timeslip...
performance mods: Brand new engine 99 spec RZ twins (sequential) upgraded sequential solenoids Apexi PFC w/ Datalogit RadiatorWorld.com aluminum radiator 850cc/1200cc injectors Walbro 255 Areomotive FPR Innovate Motorsports LC-1 wideband Defi fuel pressure gauge Defi Red Racer boost gauge Greddy Profec type-S boost controller Greddy CAI w/ K&N filters HKS turbotimer HKS twinpower HKS downpipe Pettit resonated midpipe Racing Beat single tip cat-back RPS clutch XSPOWER SMIC Last edited by HDP; 10-27-2008 at 05:21 AM. |
![]() |
![]() |
![]() |
#14 |
RCC Contributor
Join Date: Feb 2008
Location: WA State
Posts: 651
Rep Power: 18 ![]() |
Year/Model/Trim?
I'll get you added on as soon as I get the above info ![]()
__________________
Michael Pinto 2008 PDXCGP Drag Racing Season Champion 83 RX-7 GSL; 12A/5-Speed, Red/Red; 100% Stock - 16.072@83.39 01 CV Police Interceptor; 4.6 SOHC V8/4R70W, Dk Blue/Grey; K&N FIPK/RP Oil/Optima/Superchips/Flowmaster 40's/2.5" cat-back - 14.854@92.37 Read my Rx-7 Build Thread! http://rotarycarclub.com/rotary_foru...ed=1#post70955 Get on the new RCC 1/4 Mile ET List! http://www.rotarycarclub.com/rotary_...read.php?t=368 Vote for the ROTM! http://rotarycarclub.com/rotary_foru...play.php?f=125 |
![]() |
![]() |
![]() |
#15 |
Rotary Fanatic
Join Date: Feb 2008
Location: HuntsVEGAS
Posts: 249
Rep Power: 18 ![]() |
Sorry... 93 Vintage Red R1
|
![]() |
![]() |
![]() |
Bookmarks |
|
|