DGRR 2012 To Do List

2gslse · 03-05-2012, 08:49 PM

I still think a bullhorn would be better. but I can see him yelling tic-toc everytime he walks by

***TitaniumTT*** · 03-05-2012, 09:00 PM

He had to POUND on the windshield to get my attention once.... I suspect something like that will be employed eventually

SPiN Racing · 03-06-2012, 09:12 AM

Quote:

Originally Posted by SPiN Racing

Replace trailer lights, and all new braketry (thanks neighbors with riding mower)

ON the Dually: Both front tires replace DONE!
Front Steering stabilizer

On the 84 ITA RX-7 (deep breath)
Finish the front wheel spacers/adaptors on the mill/lathe DONE!

Finish the front brake caliper mounts DONE!

button up the front brakes DONE!

swap out the rear brakes for TII brakes also DONE!

rear axles DONE!

fabricate rear spacers/adaptors DONE!

decide if I am going to replace the damaged front fender, and valance.. or go with the Mandeville style GTO Body kit. replaced the fender.. still needs paint

(Very Probable

.. was the plan till the brake conversion took over)
Balance the reciprocating assy for the 6-port Eprod motor.
Assemble it
clutch cover for 5.5" Quartermaster

install it
wire up Wolf 3D 4.56
Exhaust

(Fairly unlikely)
Take apart the former Jim Bonsi dry sump 675 hp NA hill climb 13B
go over all the parts and re-assemble
install
wolf
exhaust

Updates aboveeeeee
Sons birthday is this coming weekend.. so the last few days and last weekend were busy. NOt sure whats next on the CAR list.. Im trying to decide on the engine work to do.. and if there is time and MONEY to go through them, and install them.

Sephitrask · 03-06-2012, 11:01 AM

Quote:

Originally Posted by TitaniumTT

Seriously... about all we're missing is the pump and it could start.

I brought some 1" round AL from CT this morning

VMIC will be fun, that's for damn sure.... I'll be done with the 8's in a few days, and then back on your car if the pump shows up....still not here.

so your doing a v mount on the 8? more info please!!!

***TitaniumTT*** · 03-06-2012, 11:09 AM

No VMIC in an 8, we've got 2 here with bad turbos that nees swapping... the 8 is far and away the biggest PITA of all the rotaries to work on

2gslse · 03-06-2012, 11:12 AM

No the 8 is N/A and I won't be doing any more mods to it since it is currently for sale

the V-mount is being done on my turbo FB that Brian is finishing up for me. The plan is for it to go to DGRR this year instead of my trusty single turbo FD (shes getting tired and will be rebuilt after I build a garage big enough to house everything)
The Fb will prob have more power than the FD and better street manners also.

Sephitrask · 03-06-2012, 11:50 AM

Quote:

Originally Posted by TitaniumTT

No VMIC in an 8, we've got 2 here with bad turbos that nees swapping... the 8 is far and away the biggest PITA of all the rotaries to work on

LOL it DOES have a small ass engine compt.! I relocated my battery just so I could access the cooling system with the car running...
Bad turbos? Let me guess, Greddy kits? Have the owners done the "fixes" to keep the turbo from cooking itself?

Rotary-Kytten · 03-07-2012, 01:10 AM

Wheels painted - Check!
Exhaust Modified - Check!
Ready to worship at the Church of Wankel - Check!

Bring it DGRR 2012

88turboii · 03-12-2012, 09:30 PM

here is an update on my new FD

Quote:

Originally Posted by 88turboii

replace radiator DONE
install coilovers DONE
replace altezza tails
build new harness and install PS1000 DONE
get wideband o2 bung welded onto downpipe DONE
install wideband o2 gauge and wiring DONE
install battery
delete abs DONE
decide what coils to use DONE
replace fuel filter
fix/replace gauge cluster DONE
rats nest removal/simplify sequential operation DONE
install stereo
replace broken wheel studs
street tune DONE

i also decided to ditch the twins and go single with a v-mount ic/rad setup

stuff left to do..

v-mount ducting
IC piping
build air intake
modify downpipe, install o2 bung
get front bumper painted
install front bumper
fuel filter
replace tails with oem
replace wing with oem
relocate battery
replace broken wheel studs
machine wheel hubs for wheels
replace/install stereo
tune

Rotary-Kytten · 03-19-2012, 11:07 PM

Only a few weeks left ladies and gents!
Changed my brake pads this past weekend so I can be sure they are ready for DGRR - also decided I needed a bigger wing

We are just about ready to slay the Dragon now! Just need to do an oil change before we leave, make some custom CD's, get walkie-talkie radios and GAS UP!

djmtsu · 03-22-2012, 03:59 PM

Quote:

Originally Posted by djmtsu

Well, some things just got added to the list.

1) install new door belt line seals DONE
2) install Tokico D-Spec struts with Tein S-Techs DONE
3) install Agency Power sway bars and end links DONE

Plus-

4) Installed front splash/mud guards
5) Installed RE-Amemiya Super Dolphin Tip catback

Only this left is to get my tires flipped to my 2010 RX-8 wheels and an alignment. Both of which should happen this weekend

This pic was mid tear down. I'll post a completed photo once the wheels are on.

djmtsu · 03-24-2012, 07:29 PM

Alright, shitty cell phone pic with the new wheels on. It is pretty much done with the exception of a good cleaning, and a re-seal of the right rear taillight.

Sephitrask · 04-12-2012, 07:18 PM

UGH THREAD BUMP....
Whos front shocks blow a week before DGRR? This guys, that who!! Last minute repairs FTW

I WILL make it!!

djmtsu · 04-13-2012, 07:00 AM

How the hell did you blow both front shocks??

Pete_89T2 · 04-13-2012, 07:50 AM

Quote:

Originally Posted by djmtsu

How the hell did you blow both front shocks??

Hit one of those stupid speed humps at too high a speed maybe?

03-05-2012, 08:49 PM	#76
2gslse Rotary Fanatic Join Date: Apr 2008 Location: front royal va iTrader: (0) Posts: 440 Rep Power: 17	I still think a bullhorn would be better. but I can see him yelling tic-toc everytime he walks by __________________ ____________________________________________ 1976 Cosmo needing lots of work 1993 Rx-7 410 RWHP single turbo toy 1985 Rx-7 toy/project car 411HP stoplight terror 2001 Dodge ram 4wd.parts hauler 2016 Ram 2500 cause its a hemi 2006 VW TDI commuter __________________________________________ I guarantee there's a pregnant redneck teenager somewhere in a shitty trailer park that thinks "Ebola would be a lovely name for their child"...

03-05-2012, 09:00 PM	#77
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	He had to POUND on the windshield to get my attention once.... I suspect something like that will be employed eventually __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

03-06-2012, 11:09 AM	#80
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	No VMIC in an 8, we've got 2 here with bad turbos that nees swapping... the 8 is far and away the biggest PITA of all the rotaries to work on __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

03-06-2012, 11:12 AM	#81
2gslse Rotary Fanatic Join Date: Apr 2008 Location: front royal va iTrader: (0) Posts: 440 Rep Power: 17	No the 8 is N/A and I won't be doing any more mods to it since it is currently for sale the V-mount is being done on my turbo FB that Brian is finishing up for me. The plan is for it to go to DGRR this year instead of my trusty single turbo FD (shes getting tired and will be rebuilt after I build a garage big enough to house everything) The Fb will prob have more power than the FD and better street manners also. __________________ ____________________________________________ 1976 Cosmo needing lots of work 1993 Rx-7 410 RWHP single turbo toy 1985 Rx-7 toy/project car 411HP stoplight terror 2001 Dodge ram 4wd.parts hauler 2016 Ram 2500 cause its a hemi 2006 VW TDI commuter __________________________________________ I guarantee there's a pregnant redneck teenager somewhere in a shitty trailer park that thinks "Ebola would be a lovely name for their child"...

03-07-2012, 01:10 AM	#83
Rotary-Kytten Pink Hair FTW Join Date: Jan 2011 Location: Ohio iTrader: (0) Posts: 26 Rep Power: 0	Wheels painted - Check! Exhaust Modified - Check! Ready to worship at the Church of Wankel - Check! Bring it DGRR 2012 __________________

03-19-2012, 11:07 PM	#85
Rotary-Kytten Pink Hair FTW Join Date: Jan 2011 Location: Ohio iTrader: (0) Posts: 26 Rep Power: 0	Only a few weeks left ladies and gents! Changed my brake pads this past weekend so I can be sure they are ready for DGRR - also decided I needed a bigger wing We are just about ready to slay the Dragon now! Just need to do an oil change before we leave, make some custom CD's, get walkie-talkie radios and GAS UP! __________________

03-24-2012, 07:29 PM	#87
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (10) Posts: 4,043 Rep Power: 21	Alright, shitty cell phone pic with the new wheels on. It is pretty much done with the exception of a good cleaning, and a re-seal of the right rear taillight. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

04-12-2012, 07:18 PM	#88
Sephitrask BOILED PEANUTS!!! Join Date: Jun 2010 Location: Jacksonville, Fl iTrader: (0) Posts: 257 Rep Power: 15	UGH THREAD BUMP.... Whos front shocks blow a week before DGRR? This guys, that who!! Last minute repairs FTW I WILL make it!! __________________ www.rotarycarclub.com *"The way a Rotary engine makes power is ferocious, much like having a chainsaw under your right foot."*

04-13-2012, 07:00 AM	#89
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (10) Posts: 4,043 Rep Power: 21	How the hell did you blow both front shocks?? __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5