Diary of a Madman; TitaniumTT's see you @ DGRRXI RE-REbuild

***TitaniumTT*** · 03-16-2011, 12:32 PM

Listen... I agree... on the RX8 they could've done without the feedback portion, but this isn't some pussy little 182rwhp car... ok??

We were sitting @ 223% of that.... makes cruising through downtown at full throttle a little sketchy... this also isn't some 6port turbo that can only handle like 3 seconds of full throttle before it invents, implements, and engages it's own engine brake

***TitaniumTT*** · 03-16-2011, 12:35 PM

Quote:

Originally Posted by helghast7

Well I guess I can try another magnaflow can to replace the obx one, worst case I blow it out again and then I put a horse head in your bed

I like Magnaflow. I've never had a problem with them. My only grip, like I said, is I wish they'd use a better quality stainless, that's all.

My dogs will eat that horse head and nibble on your legs as desert before you get inside

tweiss3 · 03-16-2011, 12:54 PM

My magnaflow stainless downpipe discolored quickly, which makes me kinda not happy. Also, i've managed to burn up copper gaskets on the exaust flanges, kinda thinking of going vband to eliminate leaks.

helghast7 · 03-16-2011, 02:16 PM

Quote:

Originally Posted by TitaniumTT

I like Magnaflow. I've never had a problem with them. My only grip, like I said, is I wish they'd use a better quality stainless, that's all.

My dogs will eat that horse head and nibble on your legs as desert before you get inside

Lmfao!!! Nice

Yes I'll probably pick one up asap, before the one I have no gets any worse, right now it's a tolerable drone, turn up the music and it cancels out

When are you going to Cali exactly? Tonight and tomorrow night I'm using a's bike/locate switches time with a side portion of gym lol, and Friday I have a hot date with my lady friend.....which btw likes the ol girl... +1!

If I find everything and ur still here on Saturday I can stop over

My5ABaby · 03-16-2011, 03:17 PM

Quote:

Originally Posted by TitaniumTT

Say whhhaaaaaa????? Pics?

Wish I had some. I had the carpet from a couple parts cars in my parents basement until it flooded so they're long gone. It was from an 86, I think base model.

***TitaniumTT*** · 03-16-2011, 10:51 PM

Quote:

Originally Posted by tweiss3

My magnaflow stainless downpipe discolored quickly, which makes me kinda not happy. Also, i've managed to burn up copper gaskets on the exaust flanges, kinda thinking of going vband to eliminate leaks.

It's stainless, it happens, polish it out?

Quote:

Originally Posted by helghast7

Lmfao!!! Nice

Yes I'll probably pick one up asap, before the one I have no gets any worse, right now it's a tolerable drone, turn up the music and it cancels out

Big stereo's have thier place, that's for sure/

Quote:

Originally Posted by helghast7

When are you going to Cali exactly? Tonight and tomorrow night I'm using a's bike/locate switches time with a side portion of gym lol, and Friday I have a hot date with my lady friend.....which btw likes the ol girl... +1!

If I find everything and ur still here on Saturday I can stop over

I will be here saturday with the excpetion of between ~2-4 and I've got to go through all my paperwork and setup my payments for while I'm gone. It is official though, I'm leaving for cali on Sunday, and yes that is a monster +1

Quote:

Originally Posted by My5ABaby

Wish I had some. I had the carpet from a couple parts cars in my parents basement until it flooded so they're long gone. It was from an 86, I think base model.

That's pretty badass, learn something new everyday.

MaczPayne · 03-18-2011, 09:20 PM

In for results of your BNR 3

***TitaniumTT*** · 03-18-2011, 09:45 PM

Mee too, gotta get them here first though. Looks like all my ceramic parts were attempted to be delivered today. Interior is almost done, I need to post an updated list fo shit left to do, cuz it's getting smaller!!! WEEEEE!!!!!! I NEED SOME SLEEEPPP!!!!!

EJayCe996 · 03-20-2011, 10:58 PM

Quote:

Originally Posted by TitaniumTT

WEEEEE!!!!!! I NEED SOME SLEEEPPP!!!!!

Oh look, Bri~bri made a joke

***TitaniumTT*** · 03-21-2011, 03:07 PM

Quote:

Originally Posted by EJayCe996

Oh look, Bri~bri made a joke

Humor??? what's that???

***TitaniumTT*** · 03-21-2011, 03:23 PM

So I figured I'd give the last official update for the next 12 days anywho as I am now officailly in CA.... weeee!!!!! and all you CA's can suck it, I know it, you know it, you all lie about your weather. Everytime I come here it's cold and rainy..... I should've stayed east.... at least there we get snow.

So anywho... here was the progress over the weekend. I got the new overflow for the fuel cell built and installed.. here it be. This should prohibit the fuel in the cell from expanding and puking out the vent in the fill recess and stripping the paint.... that would be bad... mmmmkay

Also finally got the interior back together with this little gem. I installed a 12V power outlet in the glovebox becuase the one on the dash was sketchy at best.... I also went out and bought the 12V adapter for the laptop as well.... so I eliminated the need for an inverter and opened myself up to unlimited tuning in the car..... SCORE!!!!

Next was addressing the gaskets in the fuel cell. The ethanol resistant Buna-n sheet gasket that I bought lasted 6 months before the whole thing rotted away, chunck broke off, fuel started spilling out when she was parked with a high ass and a full tank, and of course my fuel filter clogged..... AGAIN.....
When I opened up the tank, I found some discolored and semi-clogged fuel socks. Not wanting to wait alll that long for replacements, i had my guys at Levine cross check some denso numbers and got two new socks... woooot!

So now the cell is installed, leak tested, new filters all around, and just generally ready to kick some ass!

vex · 03-21-2011, 03:31 PM

Still need those pictures of the trigger wheels.

Force13b · 03-21-2011, 04:06 PM

Quote:

Originally Posted by TitaniumTT

I think you might benefit from some quick disconnects on your fuel tank
http://www.summitracing.com/parts/JIF-31606/

***TitaniumTT*** · 03-21-2011, 04:11 PM

Quote:

Originally Posted by vex

Still need those pictures of the trigger wheels.

They're coming damnit... we had to run out and grab grub... gimme another minute or 5

Quote:

Originally Posted by Force13b

I think you might benefit from some quick disconnects on your fuel tank
http://www.summitracing.com/parts/JIF-31606/

I thought about a few things like that, but honestly, there's plenty of room to get an 11/16" and a 3/4" wrench up there to loosen them.

***TitaniumTT*** · 03-21-2011, 04:21 PM

Also on the list of upgraded goodies this winter are new brakes, at all four corners, and a new master and adjustable prop valve and splitter. The problem with the Wilwood masters is that the bolt patern don't line up worth a damn. At least it's off by an evn 90* making the mounting pretty easy, just need to do a little math.

Stock master vs Wilwood 1" bore Master

I found an old piece of some structural 3/8" steel that turned out to be the perfect size for the master and adj prop valve to mount to the existing brake booster valve. After all the math and double checking and then rechecking I drilled and tapped the appropriote holes. I obviously need some longer bolts

Here it sits before cutting... and as it will sit for the next 12 days

I really wanted to get that bitch mounted and partially plumbed before I left, but whatever, not a HUGE deal by anymeans... didn't get the engine pulled either, that pissed me off though.

03-16-2011, 12:32 PM	#781
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Listen... I agree... on the RX8 they could've done without the feedback portion, but this isn't some pussy little 182rwhp car... ok?? We were sitting @ 223% of that.... makes cruising through downtown at full throttle a little sketchy... this also isn't some 6port turbo that can only handle like 3 seconds of full throttle before it invents, implements, and engages it's own engine brake __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

03-16-2011, 12:54 PM	#783
tweiss3 Mazda Lover Join Date: Aug 2010 Location: Akron, Ohio iTrader: (0) Posts: 319 Rep Power: 15	My magnaflow stainless downpipe discolored quickly, which makes me kinda not happy. Also, i've managed to burn up copper gaskets on the exaust flanges, kinda thinking of going vband to eliminate leaks. __________________ 2004 Mazda6 V6 5-spd - still waiting on money for a motor 1991 Mazda RX7 NA 5-spd - my new DD with 145,000 miles

03-18-2011, 09:20 PM	#787
MaczPayne Bah! Join Date: Mar 2008 Location: Riverside, SoCal iTrader: (1) Posts: 442 Rep Power: 17	In for results of your BNR 3 __________________ Johnson TA FC in the works!

03-18-2011, 09:45 PM	#788
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Mee too, gotta get them here first though. Looks like all my ceramic parts were attempted to be delivered today. Interior is almost done, I need to post an updated list fo shit left to do, cuz it's getting smaller!!! WEEEEE!!!!!! I NEED SOME SLEEEPPP!!!!! __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

03-21-2011, 03:31 PM	#792
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. iTrader: (6) Posts: 2,113 Rep Power: 19	Still need those pictures of the trigger wheels. __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group