Cup Holders - Page 5

Prodigy · 12-15-2010, 12:29 AM

Quote:

Originally Posted by barnett87rx7

But no one has commented on the idea I have had for a while so it might still be original. My plan was to use the already present storage space on the door panel but to cut out a portion at one of the ends and put in a square type cup(see below) holder and box it in. Then take a piece of the material from a donor car and glue it on so it looks stock.

That could work, but that one time you forget to take the beverage (or your passenger) and open and close the door, your car will have a nice (insert whatever beverage you were drinking *smell* and possible stickiness)

other then that, I say its a great idea...

someone just needs to do it :P

J.

helghast7 · 12-30-2010, 07:54 PM

Quote:

Originally Posted by barnett87rx7

I dont know about you guys but these have always been my favourite cup holders(see below).

kinda cheesy imo, seen them before, there kinda like an eyesore everytime i see it i just stare at it

idk about you guys but i like when stuff looks like its supposed to be there

Quote:

Originally Posted by barnett87rx7

But no one has commented on the idea I have had for a while so it might still be original. My plan was to use the already present storage space on the door panel but to cut out a portion at one of the ends and put in a square type cup(see below) holder and box it in. Then take a piece of the material from a donor car and glue it on so it looks stock.

not every version of the fc has that storage space, i no my se doesnt

and the fd definetly doesnt have any space on the doors, too tight

***TitaniumTT*** · 12-15-2010, 03:06 AM

Yeah, it won't be me. If got those shitty custom fiberglass door panels. I like the snab ones, and the audi ones that rotordad posted I was looking at getting and mounting in just that fashion.

The snab ones would be tougher and have to be mounted on the drivers side only because of my GPS..... meh, I'll get it done, but seeing as how I have a housing at the machine shop right now, I've got bigger projects

***TitaniumTT*** · 12-15-2010, 03:06 AM

Yeah, it won't be me. If got those shitty custom fiberglass door panels. I like the snab ones, and the audi ones that rotordad posted I was looking at getting and mounting in just that fashion.

The snab ones would be tougher and have to be mounted on the drivers side only because of my GPS..... meh, I'll get it done, but seeing as how I have a housing at the machine shop right now, I've got bigger projects

LOV-2-REV · 12-15-2010, 04:49 PM

What about this pop-up holder listed farther down the page of Saab parts.

http://www.saabusaparts.com/catalog/...b1vsam533lgck2

Click down, click up. Might be nice and discrete molded into (or next to) the center console.

***TitaniumTT*** · 12-31-2010, 10:51 AM

I gots no din available under the stereo which is where the challange comes from

Gregory Casimir · 03-09-2011, 11:27 PM

so how is this coming along?

***TitaniumTT*** · 03-10-2011, 09:02 PM

Still looking for some cupholders. But that Audi deal is exactely what I'm after.

***TitaniumTT*** · 03-10-2011, 09:03 PM

And not my car no, first of all it's a RHD, second, I have a digital dash

project86 · 03-10-2011, 09:43 PM

Quote:

Originally Posted by TitaniumTT

And not my car no, first of all it's a RHD, second, I have a digital dash

i know its not yours.....

Ive seen enough pics of your car to draw the damn thing.. im obsessed haha. Im still curious about those gauges though.

helghast7 · 03-10-2011, 10:55 PM

btw brian, it just popped back into my head i have another little gift for you next time i see you, i snagged it before it hit the trash last week...ill give you 2 hints, it has to do with this topic, and its made by bmw

im not sure if your actually going to use it or even want it but i figured its always easier to get an idea in your head when you can hold something solid instead of just looking at pics....and at 80 dollars a pop this was the easiest way to get one...even if it is...damaged goods lol

Kontakt · 03-28-2011, 03:59 PM

Possible temporary solution.

Build a wooden block of such shape to fill the inside of the center console. Design cup holder into block of wood.

This way when you want the cup holder you open the center console, dig out whatever is in there, put the wood piece in, put the crap that was in there in the front of the wood piece and the drink in the back.

No screws, no fuss, disappears in a second (out the window?).

My5ABaby · 03-28-2011, 04:35 PM

This is for a Miata and DJ is the one that told me about it, but it places the cup holders basically where I was thinking with my prior post. It's really not in the way of a passenger.

***TitaniumTT*** · 03-28-2011, 11:22 PM

Nah, I don't do temp very well, its still high on the list of shit to do though

RotorDad · 03-29-2011, 12:17 PM

Another Idea.
1997-2003 BMW E39 rear retractable cup holders.

12-15-2010, 03:06 AM	#3
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Yeah, it won't be me. If got those shitty custom fiberglass door panels. I like the snab ones, and the audi ones that rotordad posted I was looking at getting and mounting in just that fashion. The snab ones would be tougher and have to be mounted on the drivers side only because of my GPS..... meh, I'll get it done, but seeing as how I have a housing at the machine shop right now, I've got bigger projects __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

12-15-2010, 03:06 AM	#4
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Yeah, it won't be me. If got those shitty custom fiberglass door panels. I like the snab ones, and the audi ones that rotordad posted I was looking at getting and mounting in just that fashion. The snab ones would be tougher and have to be mounted on the drivers side only because of my GPS..... meh, I'll get it done, but seeing as how I have a housing at the machine shop right now, I've got bigger projects __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

12-31-2010, 10:51 AM	#6
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	I gots no din available under the stereo which is where the challange comes from __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

03-10-2011, 09:02 PM	#8
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Still looking for some cupholders. But that Audi deal is exactely what I'm after. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

03-10-2011, 09:03 PM	#9
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	And not my car no, first of all it's a RHD, second, I have a digital dash __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

12-15-2010, 04:49 PM	#5
LOV-2-REV Mad Tyte Yo. lol Join Date: May 2008 Location: Riverhead, NY Posts: 5 Rep Power: 0	What about this pop-up holder listed farther down the page of Saab parts. http://www.saabusaparts.com/catalog/...b1vsam533lgck2 Click down, click up. Might be nice and discrete molded into (or next to) the center console.

03-09-2011, 11:27 PM	#7
Gregory Casimir Rotary Fanatic Join Date: Jan 2010 Posts: 253 Rep Power: 16	so how is this coming along?

03-10-2011, 10:55 PM	#11
helghast7 F yo couch! Join Date: Dec 2009 Location: Belleville, NJ Posts: 223 Rep Power: 16	btw brian, it just popped back into my head i have another little gift for you next time i see you, i snagged it before it hit the trash last week...ill give you 2 hints, it has to do with this topic, and its made by bmw im not sure if your actually going to use it or even want it but i figured its always easier to get an idea in your head when you can hold something solid instead of just looking at pics....and at 80 dollars a pop this was the easiest way to get one...even if it is...damaged goods lol __________________ 87' n/a FC 94' FD-360whp, 300lbs-tq at 14psi on twins 92' ZZR-600 sold 07' CBR600RR more to come

03-28-2011, 04:35 PM	#13
My5ABaby Sigh..... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 2,377 Rep Power: 20	This is for a Miata and DJ is the one that told me about it, but it places the cup holders basically where I was thinking with my prior post. It's really not in the way of a passenger. __________________ 1986 Sport: 132k miles, 5A (Sapphire Blue Metallic), Tokico Blues, Racing Beat Springs, Custom LED tailights (only S4 LED tails in the world), SSR Mark II, Racing Beat exhaust, S5 black interior, Rotary Resurrection rebuild at 120k miles Community Service Manual RotorWiki "Imagination costs nothing; we could build square locomotives or fly to Mars" - Felix Wankel Yesterday is history, tomorrow is a mystery, but today is a gift. That is why it is called the "present."

03-28-2011, 11:22 PM	#14
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Nah, I don't do temp very well, its still high on the list of shit to do though __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

03-29-2011, 12:17 PM	#15
RotorDad Big Ugly Join Date: Apr 2009 Location: Fredericksburg, Va Posts: 591 Rep Power: 17	Another Idea. 1997-2003 BMW E39 rear retractable cup holders. __________________ *Boosted Big Body On 335's* PS3 ID: Rotordad 1986 Mazda RX7 GXL - Street ported 13BT, Haltech, 62mm, ect. 2006 MazdaSpeed 6 - Eagle, Wiseco, Cobb, ect.