FC3S Murray's never ending build. - Page 40

FC3S Murray · 11-28-2010, 10:49 AM

Quote:

Originally Posted by Nismo

So have you figured out what to do with the other 4000rpm of tach yet?

Lol.....you mean what am I going to do with the other 500 rpm left on my tach

This motor with my Katech rod bolts and cam will spin to 6500rpm with ease. Others tell me I can take it to 7K but my cam stops making power at 6600 rpm AND the next weak link in would be the valvetrain and rods so there is no reason to rev her that high.

AND leave my grannies boobies out of this conversation you motor boating son-of-a-bitch!

Nismo · 11-28-2010, 10:58 PM

Quote:

Originally Posted by FC3S Murray

AND leave my grannies boobies out of this conversation you motor boating son-of-a-bitch!

Rotorboating!!! Wait... you are the anti-christ, you can have your MOTORboat

***TitaniumTT*** · 11-24-2010, 11:07 PM

Yeah, that'd be underground spermburper....

FC3S Murray · 11-29-2010, 12:04 PM

^
hahaha

Well I got my headers installed.....and what a pain in the ass. 5lb hammer was introduced to my firewall and transmission tunnel for a second time.... meaning the motor had to come out while they "conversed".

Picture of the clearance

***TitaniumTT*** · 11-29-2010, 08:51 PM

Your car is telling you something

Nismo · 11-29-2010, 09:40 PM

Quote:

Originally Posted by TitaniumTT

Your car is telling you something

It's pretty obvious it told him to come out of the closet! lol J/K

FC3S Murray · 01-06-2011, 02:50 AM

MAN, I just read from post page 27 to now and I got to say.........you guys all rock. Even with me doing this "bad joo joo" swap, you all are alright in my book.

As for the FC, I have got a shit ton of parts in this week that are mostly fuel and exhaust related. I had to sell the RB cans to Project86 since the 2 1/4'' wasnt gonna cut it. I ended up ordering some Magnaflow polished racing mufflers with nice tips.

Project86 has my S5 bumper and OEM S5 TII lip and should be spraying soon.
A buddy and I might be welding my entire exhaust system ourselves since the only place here in Great Falls dont do good work.

A lot of stuff has gone down and this thread has been neglected. I will change that soon.
Pics will be coming very very soon.

FC3S Murray · 01-06-2011, 07:01 PM

Update:

Started my fuel system today. Its looks alright....but I work with what I got. The sender also bothers be but at least it is shiney. I am still waiting on my 30R9 hose to route to the feed and return lines. I had a shit ton of the russell Twist-lok hose left over from my 13BT build so that saved me some cash (shit sells for 40.00$ for 10FT).

My ported Throttle body came out great and I finished painting it yesterday. Should flow well

I have a ton of exhaust parts coming in: Should be able to weld her up soon.!

WE3RX7 · 01-06-2011, 09:34 PM

Whats up with the hammered paint finish on the fuel rails and coil rails? Is that factory?

Looking good..... for a v8.....

***TitaniumTT*** · 01-06-2011, 09:51 PM

Valve covers? WTF are those things?

That looks like just a wrinkle finish powdercoat. I've got a lb or so of it kicking around that I've used before.

FC3S Murray · 01-07-2011, 03:46 PM

Yep, wrinkle finsih flat black. Thanks for the relucatant compliment WE3RX7

More parts in today, most importantly my O2 sensors are in.....start up can begin very soon now!

chibikougan · 02-09-2011, 12:34 AM

Can you tow my FB to the races for me? I will get on fabin ya up a receiver hitch. I want to come ooogle your car? Update or I am just going to stop by in my G string.

Prodigy · 02-09-2011, 12:54 AM

Exhaust pics or BAN!!!!

One of my next trips through Great Falls I am going to have to plan to stop by and meet a couple of you guys, and see the car... seeing as you are just across the border (its only a 7 hour drive, I might just make it a weekend trip once in a while) and once my 7 is running fine and smooth it would be a great "little road trip" to take her on....

J.

chibikougan · 02-09-2011, 01:10 AM

That would be a good plan. Once the weather gets nicer and we get some damn 7's going I am hoping to throw a BBQ at my Cabin out in Wolf Creek. Maybe plan it around a SCCA race at the Helena airport.

Prodigy · 02-09-2011, 01:25 AM

I might, MIGHT be able to get a few more 7's depending on date, if they are running etc... :P

Sounds like something we should plan for though... would be a great time..

Where is this G-Funk place that you call home...?

J.

11-24-2010, 11:07 PM	#3
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Yeah, that'd be underground spermburper.... __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

11-29-2010, 12:04 PM	#4
FC3S Murray frustrated! Join Date: Apr 2009 Location: Montana Posts: 611 Rep Power: 17	^ hahaha Well I got my headers installed.....and what a pain in the ass. 5lb hammer was introduced to my firewall and transmission tunnel for a second time.... meaning the motor had to come out while they "conversed". Picture of the clearance __________________ Same pig, new soul

11-29-2010, 08:51 PM	#5
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Your car is telling you something __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

01-06-2011, 02:50 AM	#7
FC3S Murray frustrated! Join Date: Apr 2009 Location: Montana Posts: 611 Rep Power: 17	MAN, I just read from post page 27 to now and I got to say.........you guys all rock. Even with me doing this "bad joo joo" swap, you all are alright in my book. As for the FC, I have got a shit ton of parts in this week that are mostly fuel and exhaust related. I had to sell the RB cans to Project86 since the 2 1/4'' wasnt gonna cut it. I ended up ordering some Magnaflow polished racing mufflers with nice tips. Project86 has my S5 bumper and OEM S5 TII lip and should be spraying soon. A buddy and I might be welding my entire exhaust system ourselves since the only place here in Great Falls dont do good work. A lot of stuff has gone down and this thread has been neglected. I will change that soon. Pics will be coming very very soon. __________________ Same pig, new soul

01-06-2011, 07:01 PM	#8
FC3S Murray frustrated! Join Date: Apr 2009 Location: Montana Posts: 611 Rep Power: 17	Update: Started my fuel system today. Its looks alright....but I work with what I got. The sender also bothers be but at least it is shiney. I am still waiting on my 30R9 hose to route to the feed and return lines. I had a shit ton of the russell Twist-lok hose left over from my 13BT build so that saved me some cash (shit sells for 40.00$ for 10FT). My ported Throttle body came out great and I finished painting it yesterday. Should flow well I have a ton of exhaust parts coming in: Should be able to weld her up soon.! __________________ Same pig, new soul

01-06-2011, 09:34 PM	#9
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA Posts: 1,812 Rep Power: 19	Whats up with the hammered paint finish on the fuel rails and coil rails? Is that factory? Looking good..... for a v8.....

01-06-2011, 09:51 PM	#10
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Valve covers? WTF are those things? That looks like just a wrinkle finish powdercoat. I've got a lb or so of it kicking around that I've used before. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

01-07-2011, 03:46 PM	#11
FC3S Murray frustrated! Join Date: Apr 2009 Location: Montana Posts: 611 Rep Power: 17	Yep, wrinkle finsih flat black. Thanks for the relucatant compliment WE3RX7 More parts in today, most importantly my O2 sensors are in.....start up can begin very soon now! __________________ Same pig, new soul

02-09-2011, 12:34 AM	#12
chibikougan ⊙⊙ Join Date: Dec 2009 Location: Great Falls Posts: 1,258 Rep Power: 17	Can you tow my FB to the races for me? I will get on fabin ya up a receiver hitch. I want to come ooogle your car? Update or I am just going to stop by in my G string.

02-09-2011, 01:10 AM	#14
chibikougan ⊙⊙ Join Date: Dec 2009 Location: Great Falls Posts: 1,258 Rep Power: 17	That would be a good plan. Once the weather gets nicer and we get some damn 7's going I am hoping to throw a BBQ at my Cabin out in Wolf Creek. Maybe plan it around a SCCA race at the Helena airport.