Dispelling Myths: Using RX-8 internals in a 13B-REW

Nismo · 11-27-2009, 09:06 PM

Quote:

Originally Posted by TitaniumTT

Check the FSM's, I'm sure someone has the RX8's FSM up by now

Word.

http://foxed.ca/foxed/index.php?page=rx7manual#rx8

Monkman33 · 12-10-2009, 10:13 PM

Forgive me for my insolence, but the point of this thread is to have the info easily accessible and readable. But thanks for the link that gave me specs and such, but I have still yet to receive a complete answer. No offense meant by this, just brutal honesty, and I don't trust my engine building knowledge very much to extrapolate compatibility from specifications alone.

***TitaniumTT*** · 12-11-2009, 12:47 AM

To extrapolate the answerd that you require is pretty simple math that is explained in the FSM. I don't know the answer for certain, so I am not going to say with any certainty in either direction. What I can do is what Nismo and I have done, give you the tools to figure it out for yourself. If you're uncomfortable with your own math/engine knowledge to make a decision, I would suggest contacting an experienced engine builder. One that has done it in the past and hope that he will devulge his secrets

***TitaniumTT*** · 05-26-2011, 10:55 PM

So banned

Monkman33 · 05-27-2011, 12:00 AM

what do you mean sir Brian?

IH8DSM · 05-27-2011, 12:03 AM

but back on topic, im real curious about using the rx8 rotors.

Mad Mike, the drifter of the rx8 and 4 rotor fd. Hes running rx8 rotors in a 20b but i can't find who built his motors or his specs just that there 8 rotors. Anyone have any info on those maybe his build will help me, us, no one haha

***TitaniumTT*** · 05-27-2011, 12:10 AM

Ah.......... yeah........... someone posted some spam, the pst was "so small" then a bunch of crappy links... so I posted "so banned"..... then I banned him

stand by for phonecall sometime tomorrow...... I hope.... was on the phone when ya called.... now I must.... so I can work tomorrow.....

Monkman33 · 05-27-2011, 12:38 AM

Standing by.

I am enjoying the aviation brigade's final 4 day weekend... after this, it is only 3 day weekends... thanks to Fort Mother Rucker

Prodigy · 05-27-2011, 01:58 PM

Quote:

Originally Posted by IH8DSM

but back on topic, im real curious about using the rx8 rotors.

Mad Mike, the drifter of the rx8 and 4 rotor fd. Hes running rx8 rotors in a 20b but i can't find who built his motors or his specs just that there 8 rotors. Anyone have any info on those maybe his build will help me, us, no one haha

not so much specs, but just pics, and who built it...

http://www.pulseperformancere.com/in...p?page=gallery

your welcome

J.

12-10-2009, 10:13 PM	#47
Monkman33 Still Building my FD Join Date: Jun 2009 Location: Pasco, WA iTrader: (1) Posts: 255 Rep Power: 16	Forgive me for my insolence, but the point of this thread is to have the info easily accessible and readable. But thanks for the link that gave me specs and such, but I have still yet to receive a complete answer. No offense meant by this, just brutal honesty, and I don't trust my engine building knowledge very much to extrapolate compatibility from specifications alone. Last edited by Monkman33; 12-10-2009 at 11:10 PM..

12-11-2009, 12:47 AM	#48
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	To extrapolate the answerd that you require is pretty simple math that is explained in the FSM. I don't know the answer for certain, so I am not going to say with any certainty in either direction. What I can do is what Nismo and I have done, give you the tools to figure it out for yourself. If you're uncomfortable with your own math/engine knowledge to make a decision, I would suggest contacting an experienced engine builder. One that has done it in the past and hope that he will devulge his secrets __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

05-26-2011, 10:55 PM	#49
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	So banned __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

05-27-2011, 12:03 AM	#51
IH8DSM RCC Contributor Join Date: Mar 2008 iTrader: (0) Posts: 610 Rep Power: 17	but back on topic, im real curious about using the rx8 rotors. Mad Mike, the drifter of the rx8 and 4 rotor fd. Hes running rx8 rotors in a 20b but i can't find who built his motors or his specs just that there 8 rotors. Anyone have any info on those maybe his build will help me, us, no one haha __________________ 85 rx7 gsl-se - AA tags/ never ending project will never run Last edited by IH8DSM; 05-27-2011 at 12:08 AM..

05-27-2011, 12:10 AM	#52
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Ah.......... yeah........... someone posted some spam, the pst was "so small" then a bunch of crappy links... so I posted "so banned"..... then I banned him stand by for phonecall sometime tomorrow...... I hope.... was on the phone when ya called.... now I must.... so I can work tomorrow..... __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

05-27-2011, 12:00 AM	#50
Monkman33 Still Building my FD Join Date: Jun 2009 Location: Pasco, WA iTrader: (1) Posts: 255 Rep Power: 16	what do you mean sir Brian?

05-27-2011, 12:38 AM	#53
Monkman33 Still Building my FD Join Date: Jun 2009 Location: Pasco, WA iTrader: (1) Posts: 255 Rep Power: 16	Standing by. I am enjoying the aviation brigade's final 4 day weekend... after this, it is only 3 day weekends... thanks to Fort Mother Rucker