Chattanooga, TN area RX-7's - Page 3

thumpgun · 12-19-2014, 10:06 PM

Got a '73 240Z and sold a couple of my Beetles. Time to get some money and put it into the 7's.
What's anyone's opinion on stock versus aluminum radiator for a '85 GS? That's my next project and I'm trying to decide which one to go with. Any info, suggestions or experiences with an aluminum radiator would be appreciated.

thumpgun · 06-30-2015, 09:39 AM

Got my idler arm and radiator for the '85. Get it installed and the supsension, wheels and tires are next.

GySgtFrank · 06-30-2015, 11:38 AM

looking good.

thumpgun · 10-27-2015, 09:54 PM

I got my new aluminum radiator installed. I promptly broke the coolant level sensor. It was leaking around it. So I tried to tighten it and the top broke off.
Also installed a new Moog idler arm.
And my next project for the car should arrive this week. And I'm super stoked on this. I'll post some pics as soon as package arrives.

thumpgun · 10-29-2015, 08:24 PM

Here's what I was waiting on. Got some BBS Mahle wheels to go on the '85. They're 15x7 ET18. I'm going to strip the lips and polish them. Them have them cleared. Getting som ewheel studs and lugs for them. And I'll get some tires once I get them refinished. Looking forward to adding these to the car. Correct bolt pattern and all!

GySgtFrank · 10-29-2015, 08:42 PM

good find. You can never go wrong with meshies on a first gen.

djmtsu · 10-30-2015, 08:45 AM

Nice! I got my studs and lug nuts for my old FB here---> http://shop.gearworkstireandwheel.com/main.sc

I am not sure if they have the studs anymore though, don't see them on the website. But it was inexpensive, and the studs came with whatever style lug nuts you needed.

thumpgun · 11-01-2015, 03:02 PM

Thanks! I checked that site out. I couldn't find the wheel studs either. But a very good resource to save. I ordered some studs Thursday and hopefully pick them up tomorrow. And luckily I was digging through some old parts I have yesterday. And found a box of lug nuts that should work great.
Yeah, I was super stoked to get these wheels. Thanks for the replies.

thumpgun · 11-09-2015, 11:50 PM

I've got wheel studs and found some lugs I didn't know I had that will work. I've been stripping the clear coat off the wheels and polishing them.
Hoping I can get them looking really good. They'll have some imperfections but nothing really bad. Overall I believe they'll look and perform great.

thumpgun · 02-20-2016, 12:18 AM

Phantom Automotive services Rotary and Piston engine cars in the Chattanooga TN area.

www.facebook.com/Phantom-Automotive-1583739615241476
@phantonautomotivetn #phantonautomotivetn

djmtsu · 02-22-2016, 12:16 PM

Quote:

Originally Posted by thumpgun

Phantom Automotive services Rotary and Piston engine cars in the Chattanooga TN area.

www.facebook.com/Phantom-Automotive-1583739615241476
@phantonautomotivetn #phantonautomotivetn

Your shop, or something you've come across?

chibikougan · 02-22-2016, 04:45 PM

Go for the HILLCLIMB!

I may have been watching to much Formula Offroad..

thumpgun · 02-23-2016, 08:59 AM

It's my friend Craig's shop. He started with Mazda in 1975. He had stopped for some years only doing a build occasionally. No he has opened a new shop and is back full time at rotary repair. He also added piston engines to the work load.
Phantom Automotive TN on Instagram and om FB https://www.facebook.com/Phantom-Aut...41476/?fref=ts
A couple of RX8's have just been completed and this current build is my friend's '93 Efini. My TII will be next.
If you need rotary engine work, repair, porting, etc. Contact Craig at Phantom Automotive at 423-605-7958

thumpgun · 02-23-2016, 09:01 AM

Quote:

Originally Posted by chibikougan

Go for the HILLCLIMB!

I may have been watching to much Formula Offroad..

If I hit it hard enough, I think I could clear it! Hahaha!

thumpgun · 04-25-2016, 11:08 PM

I finally bought tires and had them mounted today. I put them on the car this evening. I love them! It rides great and looks great. Coilovers are the next project. And some door weather stripping and window scrapers.

12-19-2014, 10:06 PM	#31
thumpgun Rotary Fan in Training Join Date: Nov 2011 Location: Dixie, baby! Posts: 59 Rep Power: 14	Got a '73 240Z and sold a couple of my Beetles. Time to get some money and put it into the 7's. What's anyone's opinion on stock versus aluminum radiator for a '85 GS? That's my next project and I'm trying to decide which one to go with. Any info, suggestions or experiences with an aluminum radiator would be appreciated. __________________ '85 RX-7 GS / '73 240Z/ '61 VW Kafer

06-30-2015, 09:39 AM	#32
thumpgun Rotary Fan in Training Join Date: Nov 2011 Location: Dixie, baby! Posts: 59 Rep Power: 14	Got my idler arm and radiator for the '85. Get it installed and the supsension, wheels and tires are next. __________________ '85 RX-7 GS / '73 240Z/ '61 VW Kafer

06-30-2015, 11:38 AM	#33
GySgtFrank Professional Stick Poker Join Date: Feb 2011 Location: Stafford, Ks. Posts: 1,008 Rep Power: 16	looking good. __________________ 1988 N/A SE 2+2, dead stock and staying that way. 1979 SA22C stock? Not so much. http://rotarycarclub.com/rotary_foru...ad.php?t=15585

10-27-2015, 09:54 PM	#34
thumpgun Rotary Fan in Training Join Date: Nov 2011 Location: Dixie, baby! Posts: 59 Rep Power: 14	I got my new aluminum radiator installed. I promptly broke the coolant level sensor. It was leaking around it. So I tried to tighten it and the top broke off. Also installed a new Moog idler arm. And my next project for the car should arrive this week. And I'm super stoked on this. I'll post some pics as soon as package arrives. __________________ '85 RX-7 GS / '73 240Z/ '61 VW Kafer

10-29-2015, 08:24 PM	#35
thumpgun Rotary Fan in Training Join Date: Nov 2011 Location: Dixie, baby! Posts: 59 Rep Power: 14	Here's what I was waiting on. Got some BBS Mahle wheels to go on the '85. They're 15x7 ET18. I'm going to strip the lips and polish them. Them have them cleared. Getting som ewheel studs and lugs for them. And I'll get some tires once I get them refinished. Looking forward to adding these to the car. Correct bolt pattern and all! __________________ '85 RX-7 GS / '73 240Z/ '61 VW Kafer

10-29-2015, 08:42 PM	#36
GySgtFrank Professional Stick Poker Join Date: Feb 2011 Location: Stafford, Ks. Posts: 1,008 Rep Power: 16	good find. You can never go wrong with meshies on a first gen. __________________ 1988 N/A SE 2+2, dead stock and staying that way. 1979 SA22C stock? Not so much. http://rotarycarclub.com/rotary_foru...ad.php?t=15585

10-30-2015, 08:45 AM	#37
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	Nice! I got my studs and lug nuts for my old FB here---> http://shop.gearworkstireandwheel.com/main.sc I am not sure if they have the studs anymore though, don't see them on the website. But it was inexpensive, and the studs came with whatever style lug nuts you needed. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

11-01-2015, 03:02 PM	#38
thumpgun Rotary Fan in Training Join Date: Nov 2011 Location: Dixie, baby! Posts: 59 Rep Power: 14	Thanks! I checked that site out. I couldn't find the wheel studs either. But a very good resource to save. I ordered some studs Thursday and hopefully pick them up tomorrow. And luckily I was digging through some old parts I have yesterday. And found a box of lug nuts that should work great. Yeah, I was super stoked to get these wheels. Thanks for the replies. __________________ '85 RX-7 GS / '73 240Z/ '61 VW Kafer

11-09-2015, 11:50 PM	#39
thumpgun Rotary Fan in Training Join Date: Nov 2011 Location: Dixie, baby! Posts: 59 Rep Power: 14	I've got wheel studs and found some lugs I didn't know I had that will work. I've been stripping the clear coat off the wheels and polishing them. Hoping I can get them looking really good. They'll have some imperfections but nothing really bad. Overall I believe they'll look and perform great. __________________ '85 RX-7 GS / '73 240Z/ '61 VW Kafer

02-20-2016, 12:18 AM	#40
thumpgun Rotary Fan in Training Join Date: Nov 2011 Location: Dixie, baby! Posts: 59 Rep Power: 14	Phantom Automotive services Rotary and Piston engine cars in the Chattanooga TN area. www.facebook.com/Phantom-Automotive-1583739615241476 @phantonautomotivetn #phantonautomotivetn __________________ '85 RX-7 GS / '73 240Z/ '61 VW Kafer

02-23-2016, 08:59 AM	#43
thumpgun Rotary Fan in Training Join Date: Nov 2011 Location: Dixie, baby! Posts: 59 Rep Power: 14	It's my friend Craig's shop. He started with Mazda in 1975. He had stopped for some years only doing a build occasionally. No he has opened a new shop and is back full time at rotary repair. He also added piston engines to the work load. Phantom Automotive TN on Instagram and om FB https://www.facebook.com/Phantom-Aut...41476/?fref=ts A couple of RX8's have just been completed and this current build is my friend's '93 Efini. My TII will be next. If you need rotary engine work, repair, porting, etc. Contact Craig at Phantom Automotive at 423-605-7958 __________________ '85 RX-7 GS / '73 240Z/ '61 VW Kafer

04-25-2016, 11:08 PM	#45
thumpgun Rotary Fan in Training Join Date: Nov 2011 Location: Dixie, baby! Posts: 59 Rep Power: 14	I finally bought tires and had them mounted today. I put them on the car this evening. I love them! It rides great and looks great. Coilovers are the next project. And some door weather stripping and window scrapers. __________________ '85 RX-7 GS / '73 240Z/ '61 VW Kafer