I need your old fucntioning stock coils

[2gslse]

Where did you mount the coils on the FD? space is limited. How much do you charge to tune a power FC? I have a good tune on my FD at the moment but I think it could be better. how is the drivability of your tune on the power fc compared to the haltech

[C. Ludwig]

Sorry to highjack the thread....

Mounting the Merc coils in the FD is a PITA. I'll need to take a pic. Basically, they're lined up in an aluminum bracket and sit under the master cylinder at an angle of about 30-40* running down from front to back. Only place I could find to mount them after a whole lot of time spent staring at the car. The fit ended up being nice and functional but you now have to change the plugs from under the car.

I like working with the PFC for the most part. Driveability ca be quite good. The PFC has some major quirks (minimum of 1.8 mS injector on time regardless of what you actually program makes it fun to run large primary injectors) but once you have experience with it and knowledge of the Datalogit interface it's a very good system. I'd prefer a full standalone but it is what it is.

[TitaniumTT]

Alright, Almost a month and things are coming together.......... I should have my new bosch coils early next week and I can mod my harness. I've got a set of FC coils, a set of FD coils and igniter, Merc CDI coils and an M&W Pro14 box - here's what I need and some of you will have PM's shortly

I would LOVE to have part of an FD harness that has the connector for the ignitors and the coils. I'll check again, I SHOULD have this but I'm not seeing it.

Merc coils and connectors

RX8 Coils and connectors

a second set of Denso coils - D585's if they are NOT the auto ignite or a set of D510C's if someone is planning an RX8 upgrade.

MSD 6A box for the FC coils

Looking to be on the dyno 4/10 to torture these things.

[TitaniumTT]

Originally Posted by TitaniumTT

I would LOVE to have part of an FD harness that has the connector for the ignitors and the coils. I'll check again, I SHOULD have this but I'm not seeing it.

Not seeing it, anyone have it?

Originally Posted by TitaniumTT

Merc coils and connectors

On thier way to me, thanks MC! BTW - what did you pay for those? Took the PN Chris supplied to my wholesaler, thier cost is ~$60, mine would be ~$80, list is ~$120 No connectors like 034 has though. Would need to source those seperately. Waytek should have them, it's just a matter of figureing out which one it is

Originally Posted by TitaniumTT

RX8 Coils and connectors

Still need, where are you Bill?

Originally Posted by TitaniumTT

a second set of Denso coils - D585's if they are NOT the auto ignite or a set of D510C's if someone is planning an RX8 upgrade.

Still need, where are you Bill?

Originally Posted by TitaniumTT

MSD 6A box for the FC coils

On it's way to me, thanks much Rotary Prophet!

[C. Ludwig]

034 has the Merc coils for $72 with the connector. Imagine that's where MC got his. You're seeing what I've seen, inability to find a less expensive source so that I can offer them. I just send everybody to 034.

[TitaniumTT]

I've got one more place to try, they usually set me up a little better. Out of curiousity, what tyoe of connector is that? Looks like a metripack 280 series.....

[C. Ludwig]

http://www.bmotorsports.com/shop/pro...roducts_id/780

[TitaniumTT]

Gotcha, seems a little steep but my normal supply houses (Waytekwire and TerminalSupplyco) don't seem to stock them.... interesting

[2gslse]

034 motorsports is where I got them C. Ludwig was kind enough to reccomend them and provided the like to me. it seems like a odd place to buy marine parts cheaper than anywhere else

[TitaniumTT]

If they're buying them from QuickSilver directly as opposed to buying them from a wholesaler, they can get GOOD pricing. Probably $45each I'd imagine. Cost from the distributor is $60. Or, they believe in economies of scale. From what I know these are pretty popular with the VW, Audi crowd. I just wanna see how they stack up to my Bosch's. The Boschs are the most expensive, so I'm gonna be pissed if a $60 Merc coil @ ~2/3's the cost does better

Then again the Boschs are TINY! So that has it's own advantage. FWIW I spoke with Paul today. Everything shipped so I should have my new coils/injectors on Monday. I'll snap some pics of all the coils that I have collected thus far.

[goracer]

No updates on these being tested?

[2gslse]

Not yet he has been busy doing a complete teardown/rebuild of the entire car. he even missed DGRRX



I think he has been slacking off too much lately.

[TitaniumTT]

Yeah, my ASS... I need to schedule time to take a shit..... lemme put it to you this way, today - well, yesterday - was my "day off" yet I still went into work for a few hours, then away I went to PA. We fixed the 6-spd then I headed to jersey to pick up a new rear-end. Then I had a blow-out on the GWB - yeah - FL blew out @ 65 in the left lane. I hit a pot hole that would require about 27 ground up homeless people to fill, or 2 compacted honda's by the way FUCK YOU AAA AND THE CROOKED ASS RETARDED MOTHERFUCKING NYC TOWING CO'S THAT CAN'T FIND YOU WHEN YOU GIVE THEM A FUCKING MILE MARKER but thank God for 24hr tire shops in the Bronx and non-english speaking mofo's that don't stab/shoot you when you take thier own tools away from them... 5 hours later here I am passing the next 32 minutes before I hop a shower @ 4 to leave for work @ 4:30 on my "day off" Then it's a fabrication side job that has a deadline of Monday monring but the iron works place fucked me by three days so I need to pick up that material, build this fucking thing today then drop the rear subframe, set up some 4.3 gears that should be here today, a few little odds and ends and with any luck I'll be on the dyno next Friday for the base tune. Then the next time I get a "day off" I'll head back to the dyno for some alignment and cornerbalancing and test out the coils. So HOPEFULLY 3 weeks away.... hopefully. I've been so slammed for the last 2.5 months it's retarded.

[Kentetsu]

Too bad you can't clone yourself TT. There are many days I wish we had that tech available...

[TitaniumTT]

Funny you mention that, I've said it a few times and thoroughly enjoyed the family guy episode where Stewie clones himself