what do you want to see from Atkinsrotary???

well uhhh · 04-24-2008, 01:41 PM

Quote:

Originally Posted by misterstyx69

I'd like to See a "special price" for Members on the Master Rebuild kits!..maybe Toss in a Rebuild DVD for First Timer rebuiders?.Of course the Special would only be if they Mention THIS forum!

WIN x 1billion

Max777 · 05-25-2008, 04:13 AM

WAY TOO EXPENSIVE SHIPPING!

I tried to order a clutch hose and a throw out bearing for my FC, and the cheapest shipping is alone $22.something dollars!!!!!

With the bearing costing $30, and the clutch line $25, that makes my $55 in parts cost me roughly $80. It cost me less money to ship a wheel to someone! I dont want priority shipping, I dont care if it takes a week insead of 3 days, I want a cheaper shipping option if I prefer one!
It does NOT cost $20 to ship a tiny bearing and a small hose to Antarctica, yet alone ILLINOIS. Come on guys, VERY DISSAPOINTED with this.

...and I was looking forward to be your customer for a while too...

PS: Pinapple Racing's shipping, FROM OREGON, is perfect in comparison if that will motivate you any.

13bpower · 05-25-2008, 11:48 AM

Id like to see atkins come up with a turbo kit for 1gen 12a's and 13b's.And 2nd gen and 3rd gen.

AzEKnightz · 06-22-2008, 12:07 AM

Quote:

Originally Posted by misterstyx69

I'd like to See a "special price" for Members on the Master Rebuild kits!..maybe Toss in a Rebuild DVD for First Timer rebuiders?.Of course the Special would only be if they Mention THIS forum!

YEA, DEFINITELY!!

warwickben · 08-15-2008, 07:16 AM

iam going to go turbo this winter if atkins wants i would send them my mani and down pipe. to copy, make a jig. ect.
iam making it so it will bolt right in to my racing beat setup. if you dont want to use the mini muffler you could just make a 1 foot long pipe to replace that.

Atkins Dan · 09-18-2008, 03:47 PM

SpooledupRacing

If you call in and ask for USPS shipping than it will be done however if you dont say anything than we {Josh & I} go for UPS ground.
The same thing goes for the other shop I also run..

as for the rebuild kits I will post another thread and see what I can get started plus I will have a better idea on what kits you all will want from me so I can see about doing a GB..

Dan

HDP · 09-18-2008, 08:26 PM

What about some of the other suggestions? You asked for new ideas but don't give any feedback.

Atkins Dan · 09-19-2008, 10:54 AM

I am reviewing all the ideas given with Dave & Kathy.. So one thing @ a time please...

Dan

09-19-2008, 12:58 PM

Dan. Thanks again for contacting me yesterday it was a pleasure talking to ya.

I look forward to our next transaction.

Whizbang · 11-03-2008, 10:39 PM

what all do you sell for older rotaries? ill be restoring some rx2s and rx4 (including a wagon) in the nearish future

Atkins Dan · 11-04-2008, 12:51 PM

Low it will all depend on what you are looking for as there is a lot that is not available anymore.

Dan

Whizbang · 11-04-2008, 01:57 PM

well once i acquire them, ill for sure need needing the full set of lenses, etc.

vex · 11-04-2008, 02:29 PM

http://www.rotarycarclub.com/showthread.php?t=4958

A few suggestions you may want to consider on top of what has been said here as well.

05-25-2008, 04:13 AM	#32
Max777 Pirate Join Date: Mar 2008 Location: Central IL iTrader: (5) Posts: 1,323 Rep Power: 18	WAY TOO EXPENSIVE SHIPPING! I tried to order a clutch hose and a throw out bearing for my FC, and the cheapest shipping is alone $22.something dollars!!!!! With the bearing costing $30, and the clutch line $25, that makes my $55 in parts cost me roughly $80. It cost me less money to ship a wheel to someone! I dont want priority shipping, I dont care if it takes a week insead of 3 days, I want a cheaper shipping option if I prefer one! It does NOT cost $20 to ship a tiny bearing and a small hose to Antarctica, yet alone ILLINOIS. Come on guys, VERY DISSAPOINTED with this. ...and I was looking forward to be your customer for a while too... PS: Pinapple Racing's shipping, FROM OREGON, is perfect in comparison if that will motivate you any. __________________ Rotaries:They are NOT that complicated! Last edited by Max777; 05-25-2008 at 04:25 AM..

08-15-2008, 07:16 AM	#35
warwickben sa rat rod Join Date: Mar 2008 Location: tewksbury ma iTrader: (4) Posts: 408 Rep Power: 17	iam going to go turbo this winter if atkins wants i would send them my mani and down pipe. to copy, make a jig. ect. iam making it so it will bolt right in to my racing beat setup. if you dont want to use the mini muffler you could just make a 1 foot long pipe to replace that. __________________

11-03-2008, 10:39 PM	#40
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp iTrader: (5) Posts: 3,190 Rep Power: 20	what all do you sell for older rotaries? ill be restoring some rx2s and rx4 (including a wagon) in the nearish future __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

11-04-2008, 12:51 PM	#41
Atkins Dan Premium Vendor Join Date: Feb 2008 iTrader: (6) Posts: 265 Rep Power: 17	Low it will all depend on what you are looking for as there is a lot that is not available anymore. Dan __________________ 82 SuperCharged rx-7 {my toy not the daily driver anymore now under restoration} 88 B2200 rotary powered with a 7inch Camden SuperCharger !RIP! Jan/4/2007 2001 626 5-speed 80k on the clock all stock {Truck replacement} 2005 MAZDA6 V6 WAGON now that is a pimping ride all stock for the moment.. Paid off WWW.AtkinsRotary.com

11-04-2008, 01:57 PM	#42
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp iTrader: (5) Posts: 3,190 Rep Power: 20	well once i acquire them, ill for sure need needing the full set of lenses, etc. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

05-25-2008, 11:48 AM	#33
13bpower Rotary Fan in Training Join Date: May 2008 Location: New hope mn iTrader: (0) Posts: 57 Rep Power: 17	Id like to see atkins come up with a turbo kit for 1gen 12a's and 13b's.And 2nd gen and 3rd gen.

09-18-2008, 03:47 PM	#36
Atkins Dan Premium Vendor Join Date: Feb 2008 iTrader: (6) Posts: 265 Rep Power: 17	SpooledupRacing If you call in and ask for USPS shipping than it will be done however if you dont say anything than we {Josh & I} go for UPS ground. The same thing goes for the other shop I also run.. as for the rebuild kits I will post another thread and see what I can get started plus I will have a better idea on what kits you all will want from me so I can see about doing a GB.. Dan

09-18-2008, 08:26 PM	#37
HDP Rotary Fanatic Join Date: Feb 2008 Location: HuntsVEGAS iTrader: (0) Posts: 249 Rep Power: 17	What about some of the other suggestions? You asked for new ideas but don't give any feedback.

09-19-2008, 10:54 AM	#38
Atkins Dan Premium Vendor Join Date: Feb 2008 iTrader: (6) Posts: 265 Rep Power: 17	I am reviewing all the ideas given with Dave & Kathy.. So one thing @ a time please... Dan

09-19-2008, 12:58 PM	#39
SpooledupRacing Guest Posts: n/a	Dan. Thanks again for contacting me yesterday it was a pleasure talking to ya. I look forward to our next transaction.

11-04-2008, 02:29 PM	#43
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. iTrader: (6) Posts: 2,113 Rep Power: 19	http://www.rotarycarclub.com/showthread.php?t=4958 A few suggestions you may want to consider on top of what has been said here as well. __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group