FC3S Header Talk

Flooder · 12-01-2008, 12:13 PM

I wasn't talking about auto cross. Auto cross has stupid rules and very little track time

.

TehMonkay · 12-01-2008, 12:14 PM

ITS is a road racing class

JunpoweR · 12-08-2008, 06:18 PM

For the money, Racing Beat RoadRace full exhaust.
It is a heavy unit tho, you can get some custom made with Titanium and with every custom build exhaust I recommend flex pipe built into the system esp for turbo's to avoid problems later like cracked hot side of turbo and helps the exhaust from getting leaks at the gaskets.

Roen · 12-10-2008, 12:57 PM

ISC makes a header that the ITS guys swear by.

There are many more NA Road track cars than there are turbo's, for the simple fact that the RX-7's are classed very competitively in those classes then only allow limited modifications.

TehMonkay · 12-10-2008, 02:55 PM

A collected header is best for a rotary engine.

I was planning on using the ISC headers when i go peripheral port, ii'm glad people hear good things about them.

Whizbang · 12-10-2008, 02:57 PM

As far as something for a stock port engine goes that doesn't cost 500 or more, is there many choices? I am half tempted to just make my own. I have a welder, might as well use it.

drewski86 · 12-10-2008, 04:12 PM

The streetable Racing Beat header isn't that bad. I was making 155-160whp with a stock ~180k mile S4. You're going to find the best options from a racing team who sells their headers, but you're going to pay for their R&D. Or you could get the Racing Beat road race header and make a collector shortly after the flange, but expect to make a few before you get it "right".

Whizbang · 12-10-2008, 04:14 PM

looked a little, the ISC is only 350 and is stainless which is on par with Racing beat.

drewski86 · 12-10-2008, 04:56 PM

From the pictures and what people have said, the ISC header is a better design as it hruns several inches from the port before the first bend. You could save ~$100 and get the non-stainless road race header from Racing Beat but it will not last as long.

I ended up going with the ISC stainless header rather than trying to save a few bucks.

Whizbang · 12-10-2008, 04:58 PM

Whats your thoughts on it

drewski86 · 12-10-2008, 05:20 PM

Not sure yet, it's in the mail. I lost my motor so I'll have to take care of that before I'll know for sure.

Roen · 12-10-2008, 05:36 PM

There's a guy on the other forum called pirsq. He says he's got a new exhaust system, similar to the ISC, with some promising results, though none verified.

Whizbang · 12-10-2008, 05:41 PM

Quote:

Originally Posted by Roen

There's a guy on the other forum called pirsq. He says he's got a new exhaust system, similar to the ISC, with some promising results, though none verified.

i've read his stuff a number of times, but seems to be a lot of hear say floating around. Ill look into it if he ever puts a chart or even a price.

Roen · 12-10-2008, 05:43 PM

He won't, he wants you to call him.

farberio · 12-10-2008, 07:59 PM

Do you have the link to the ISC header? I tried google searching it but got nothing. (Or I am blind...)

N/M
Found it.
http://iscracing.net/2nd_Gen_Parts.htm

12-01-2008, 12:13 PM	#16
Flooder Rotary Fanatic Join Date: Feb 2008 Location: Tucson, Arizona iTrader: (0) Posts: 321 Rep Power: 17	I wasn't talking about auto cross. Auto cross has stupid rules and very little track time . __________________ AZRX7.COM Red 1991 A-package(SOLD) Red 1990 GXL(SOLD) White 1989 GTUs(DEAD) Red 1988 Turbo II(DD) Black 1988 Turbo II(SOLD) Rebuilt and street ported motor, Garrett T04E Turbo, 3" Turbo Inlet Duct/AEM Dry Flow Filter, Your Mom's MBC, Blitz FMIC, 890cc and 1000cc injectors, Tomei FPR, Walbro, Rtek 2.1 ECU, Taurus E-Fan, Turbonetics BOV, 3" Motoria/Corksport Turbo Back Exhaust, Emissions Removed, Greddy Boost Gauge, Megan Racing Water Temp Gauge, 5one5 Triple Gauge Pod, AEM Uego, GP Sports Body Kit, Fiber Images CF Hood, S5 Seats, S5 Tails, S5 Alt, Dual Alt Pulley, D2 Coilovers, NRG Quick Release, Shook Motorsports Radiator, HID's, AN/Steel Braided Oil Cooler Lines, SUPER JDM TYTE DRIFT BUTTON www.DensetsuMotorsports.com www.AZRX7.Com www.FloodersAdventure.com

12-01-2008, 12:14 PM	#17
TehMonkay Rotary Fanatic Join Date: Apr 2008 Location: Louisville, KY iTrader: (0) Posts: 302 Rep Power: 17	ITS is a road racing class __________________ My car blows up everytime I start it, it's rotary

12-08-2008, 06:18 PM	#18
JunpoweR Rotary Fan in Training Join Date: May 2008 iTrader: (0) Posts: 66 Rep Power: 0	For the money, Racing Beat RoadRace full exhaust. It is a heavy unit tho, you can get some custom made with Titanium and with every custom build exhaust I recommend flex pipe built into the system esp for turbo's to avoid problems later like cracked hot side of turbo and helps the exhaust from getting leaks at the gaskets. __________________ --^v--JunpoweR--^v-- "90 GTUs Crystal White GT35 WB TA Project "90 GTUs Brilliant Black Restoration 1984 GSL-SE Daily

12-10-2008, 02:55 PM	#20
TehMonkay Rotary Fanatic Join Date: Apr 2008 Location: Louisville, KY iTrader: (0) Posts: 302 Rep Power: 17	A collected header is best for a rotary engine. I was planning on using the ISC headers when i go peripheral port, ii'm glad people hear good things about them. __________________ My car blows up everytime I start it, it's rotary

12-10-2008, 02:57 PM	#21
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp iTrader: (5) Posts: 3,190 Rep Power: 20	As far as something for a stock port engine goes that doesn't cost 500 or more, is there many choices? I am half tempted to just make my own. I have a welder, might as well use it. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

12-10-2008, 12:57 PM	#19
Roen Evil Club Mod Join Date: Feb 2008 iTrader: (0) Posts: 183 Rep Power: 17	ISC makes a header that the ITS guys swear by. There are many more NA Road track cars than there are turbo's, for the simple fact that the RX-7's are classed very competitively in those classes then only allow limited modifications.

12-10-2008, 04:12 PM	#22
drewski86 Slow Join Date: Jun 2008 iTrader: (0) Posts: 38 Rep Power: 0	The streetable Racing Beat header isn't that bad. I was making 155-160whp with a stock ~180k mile S4. You're going to find the best options from a racing team who sells their headers, but you're going to pay for their R&D. Or you could get the Racing Beat road race header and make a collector shortly after the flange, but expect to make a few before you get it "right".

12-10-2008, 04:14 PM	#23
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp iTrader: (5) Posts: 3,190 Rep Power: 20	looked a little, the ISC is only 350 and is stainless which is on par with Racing beat. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

12-10-2008, 04:56 PM	#24
drewski86 Slow Join Date: Jun 2008 iTrader: (0) Posts: 38 Rep Power: 0	From the pictures and what people have said, the ISC header is a better design as it hruns several inches from the port before the first bend. You could save ~$100 and get the non-stainless road race header from Racing Beat but it will not last as long. I ended up going with the ISC stainless header rather than trying to save a few bucks.

12-10-2008, 04:58 PM	#25
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp iTrader: (5) Posts: 3,190 Rep Power: 20	Whats your thoughts on it __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

12-10-2008, 05:20 PM	#26
drewski86 Slow Join Date: Jun 2008 iTrader: (0) Posts: 38 Rep Power: 0	Not sure yet, it's in the mail. I lost my motor so I'll have to take care of that before I'll know for sure.

12-10-2008, 05:36 PM	#27
Roen Evil Club Mod Join Date: Feb 2008 iTrader: (0) Posts: 183 Rep Power: 17	There's a guy on the other forum called pirsq. He says he's got a new exhaust system, similar to the ISC, with some promising results, though none verified.

12-10-2008, 05:43 PM	#29
Roen Evil Club Mod Join Date: Feb 2008 iTrader: (0) Posts: 183 Rep Power: 17	He won't, he wants you to call him.

12-10-2008, 07:59 PM	#30
farberio Rotary Fan in Training Join Date: Mar 2008 iTrader: (0) Posts: 38 Rep Power: 0	Do you have the link to the ISC header? I tried google searching it but got nothing. (Or I am blind...) N/M Found it. http://iscracing.net/2nd_Gen_Parts.htm