NA SemiPP 20b - Page 2

reddozen · 03-08-2017, 10:28 AM

AP for the RX8 still allows for readiness checks to be set normally. I reset my stuff all the time. I have all the cat codes turned off and pass emissions every time. So none of that concerns me having dealt with the bridge port for years.

I think the RX8 only set the not ready if it receives a mill code, but since it can't throw it, it always sets ready. My only not set check is the air pump. I may have a circuit made to fool that one.

You're not the first person I've heard about that from with the speed3.

djmtsu · 03-08-2017, 10:45 AM

Different protocols for the ECM.

***TitaniumTT*** · 03-09-2017, 11:39 AM

Someone needs to donate a 20B to me.... I'll get it installed and running in my FC in a few weeks time......

hades · 03-09-2017, 10:38 PM

Quote:

Originally Posted by TitaniumTT

Someone needs to donate a 20B to me.... I'll get it installed and running in my FC in a few weeks time......

Psssssshhhhhhhhh

:smilielol 5:

***TitaniumTT*** · 03-13-2017, 08:19 AM

I know, right?

reddozen · 05-12-2017, 11:06 AM

Some people might be curious about the rest of the car...

LEG Motorsports RX8-Vision carbon front bumper
Vertex Lang sides and rear bumper
Panspeed wide front and rear fenders
AutoExe SE03 hood
AutoExe SE02 duktail trunk
RE Amemiya carbon tail lights and AD Pro fender mirrors

Probably a couple more things before it goes to paint (after the engine).

almoststockfc · 05-12-2017, 01:14 PM

Dont forget about those seats!

reddozen · 05-12-2017, 01:23 PM

Quote:

Originally Posted by almoststockfc

Dont forget about those seats!

SHHHHH!!!!! lol

Yea... I have red MazdaSpeed sport bucket seats going in the car too.

reddozen · 05-24-2017, 09:16 AM

Seats are back from fabrication shop. They have feet and are ready for the RX8.

reddozen · 06-30-2017, 09:24 AM

Spirit R headlights are in!

GySgtFrank · 07-01-2017, 09:26 AM

More goodies! This thing should be cool as hell when you get it done. :kudos:

Sharingan 19 · 07-18-2017, 09:05 AM

Please document this thoroughly, it's exactly what my R3 needs when the time comes

reddozen · 08-14-2017, 02:46 PM

PROMAZ crossmember on it's way.
Xcessive Engineering short LIM with Full Function Engineering fuel rail and 6x ID1050 injectors arrived.

Johnny_K · 08-14-2017, 03:12 PM

very nice.

FC Zach · 08-14-2017, 03:19 PM

Pretty

03-08-2017, 10:28 AM	#1
reddozen Gold Wheels FTW Join Date: Mar 2008 Posts: 744 Rep Power: 18	AP for the RX8 still allows for readiness checks to be set normally. I reset my stuff all the time. I have all the cat codes turned off and pass emissions every time. So none of that concerns me having dealt with the bridge port for years. I think the RX8 only set the not ready if it receives a mill code, but since it can't throw it, it always sets ready. My only not set check is the air pump. I may have a circuit made to fool that one. You're not the first person I've heard about that from with the speed3. __________________ My Cars: 1974 RX4 Coupe 1991 FC3S RX7 - Sold 2003 ZZW30 MR2 (Rotary swap after RX8) 2004 SE3P RX8 (20B Swap in the works)

03-08-2017, 10:45 AM	#2
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	Different protocols for the ECM. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

03-09-2017, 11:39 AM	#3
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Someone needs to donate a 20B to me.... I'll get it installed and running in my FC in a few weeks time...... __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

03-13-2017, 08:19 AM	#5
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	I know, right? __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

05-12-2017, 11:06 AM	#6
reddozen Gold Wheels FTW Join Date: Mar 2008 Posts: 744 Rep Power: 18	Some people might be curious about the rest of the car... LEG Motorsports RX8-Vision carbon front bumper Vertex Lang sides and rear bumper Panspeed wide front and rear fenders AutoExe SE03 hood AutoExe SE02 duktail trunk RE Amemiya carbon tail lights and AD Pro fender mirrors Probably a couple more things before it goes to paint (after the engine). __________________ My Cars: 1974 RX4 Coupe 1991 FC3S RX7 - Sold 2003 ZZW30 MR2 (Rotary swap after RX8) 2004 SE3P RX8 (20B Swap in the works)

05-12-2017, 01:14 PM	#7
almoststockfc ..... Join Date: Jan 2010 Location: Murfreesboro, TN Posts: 543 Rep Power: 16	Dont forget about those seats! __________________ -75 RE_W_PU - -76 Hercules W2000 - DGRR 2012 3rd place Old School -75 Hercules W2000 MSO - DGRR 2011 Peoples Choice - April 2011 Rotary of the Month -Rotary snowmobile powered go kart - DGRR 2012 Peoples Choice - RIP

07-01-2017, 09:26 AM	#11
GySgtFrank Professional Stick Poker Join Date: Feb 2011 Location: Stafford, Ks. Posts: 1,007 Rep Power: 16	More goodies! This thing should be cool as hell when you get it done. :kudos: __________________ 1988 N/A SE 2+2, dead stock and staying that way. 1979 SA22C stock? Not so much. http://rotarycarclub.com/rotary_foru...ad.php?t=15585

07-18-2017, 09:05 AM	#12
Sharingan 19 Rotary Fanatic Join Date: May 2010 Posts: 138 Rep Power: 15	Please document this thoroughly, it's exactly what my R3 needs when the time comes

08-14-2017, 03:12 PM	#14
Johnny_K Rotary Fanatic Join Date: Jun 2013 Posts: 225 Rep Power: 12	very nice.

08-14-2017, 03:19 PM	#15
FC Zach RCC Loves Me Not You Join Date: Mar 2008 Location: Eagleville, TN Posts: 2,267 Rep Power: 20	Pretty __________________ 1993 Yamaha GTS1000 1992 Celica Turbo AllTrac 1987 RX7 Sport 1979 Yamaha G1, KM24 powered 1975 Dolmar KMS4