oil pan braces - Page 2

Garfinkles Motor Works · 12-02-2008, 10:03 AM

If you are using the stock oil pan with drilled out holes then the brace is for you .The holes have made the pan rail weak and the brace willimprove things .The holes in the brace will to be drilled out as well .The brace is 3/16 thick and will still reinforce the pan to keep it from distorting .

AzEKnightz · 02-07-2009, 01:17 PM

Will this work well with stock oil pan and no modifications (I have a leakage >.<) Please let me know for I will paypal once confirmed. Thanks in advance.

p.s. Please pm for I dont check the forum alot nowadays. Thanks again.

-AzEKnightz

Garfinkles Motor Works · 02-08-2009, 05:20 AM

Pm to you and yes this will work on stock pans .Most people have stock pans ,some with studs and nuts . The groove cut in my brace is the feature that lets the brace do its job ,with out the groove the brace will not contact the pan rails width fully.

fire85gslse · 04-21-2009, 08:05 PM

These are a great brace. Once I installed mine I understood why this is the better brace out there.
Man, am I lucky to have a friend like David living so close to me and makes great products for my RX7's

mc-don · 08-08-2009, 02:54 PM

Is the oil pan brace still available? I have a leaking oil pan and would be interested in getting one.

Garfinkles Motor Works · 08-10-2009, 07:14 AM

THERE are a few ready to go

TimeMachine · 09-09-2009, 10:24 AM

I'd like to order one ASAP, I shall PM you with details

MOBEONER · 09-13-2009, 05:26 PM

I have received certain products from David my self and i can tell you first hand he takes pride on what he does and the parts are top notch.

Garfinkles Motor Works · 03-22-2010, 08:30 PM

I have a new batch ready to ship with the bolts and o-ring The price of the steel went up but the price will be the same .

Red Baron · 05-17-2010, 03:55 PM

Very much interested in one, how much and where do I send money???
Also what does the kit include and where can I see one??? PM or email me: red93r2@sbcglobal.net

Garfinkles Motor Works · 05-17-2010, 06:29 PM

They are $125 includes shipping $129 paypal .Includes high grade longer pan bolts (19) and longer motor mount bolts (6) . This is the only one with a milled groove to clear the pinch rail on the stock pan,so full presure is applied to the pan .

speedjunkie · 01-23-2011, 02:50 PM

I want to pick up one of these. What is your paypal?

Garfinkles Motor Works · 01-24-2011, 06:18 AM

garfinklemw@gmail.com

lwnslw · 02-06-2011, 10:41 PM

Anyone have pics ??

Garfinkles Motor Works · 02-07-2011, 03:13 AM

I think Howard Coleman does ,he uses them on the engines he builds .This is the only brace with a milled groove to fit over the pans pinch rail so full pressure is given across the rail .I drill the two missing holes in the late model pans and use all 19 ( included ) 6mm bolts .I notch the motor mount to clear the new bolt head . The motor mount bolts and the oil level sensor o-ring come with it as well .

04-21-2009, 08:05 PM	#19
fire85gslse RCC Addict Join Date: Feb 2008 Location: Middle TN Posts: 1,029 Rep Power: 19	These are a great brace. Once I installed mine I understood why this is the better brace out there. Man, am I lucky to have a friend like David living so close to me and makes great products for my RX7's __________________ I own A few Rotaries and Yes, I have a rotary problem. (SELLING OFF All my parts) 79SA(Respeed Car),93 FD (tweakit)

09-13-2009, 05:26 PM	#23
MOBEONER Rotary Fan in Training Join Date: Jan 2009 Posts: 30 Rep Power: 0	I have received certain products from David my self and i can tell you first hand he takes pride on what he does and the parts are top notch. __________________ Hit em and run plumbing

05-17-2010, 03:55 PM	#25
Red Baron The Newbie Join Date: Mar 2009 Posts: 19 Rep Power: 0	Very much interested in one, how much and where do I send money??? Also what does the kit include and where can I see one??? PM or email me: red93r2@sbcglobal.net Last edited by Red Baron; 05-17-2010 at 03:58 PM.

02-06-2011, 10:41 PM	#29
lwnslw Rotary Fanatic Join Date: Mar 2008 Location: Boostville Posts: 193 Rep Power: 18	Anyone have pics ?? __________________

12-02-2008, 10:03 AM	#16
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	If you are using the stock oil pan with drilled out holes then the brace is for you .The holes have made the pan rail weak and the brace willimprove things .The holes in the brace will to be drilled out as well .The brace is 3/16 thick and will still reinforce the pan to keep it from distorting .

02-07-2009, 01:17 PM	#17
AzEKnightz ZooM ZooM!! Join Date: Jun 2008 Location: SF, CA Posts: 90 Rep Power: 17	Will this work well with stock oil pan and no modifications (I have a leakage >.<) Please let me know for I will paypal once confirmed. Thanks in advance. p.s. Please pm for I dont check the forum alot nowadays. Thanks again. -AzEKnightz

02-08-2009, 05:20 AM	#18
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	Pm to you and yes this will work on stock pans .Most people have stock pans ,some with studs and nuts . The groove cut in my brace is the feature that lets the brace do its job ,with out the groove the brace will not contact the pan rails width fully.

08-08-2009, 02:54 PM	#20
mc-don The Newbie Join Date: Aug 2009 Posts: 1 Rep Power: 0	Is the oil pan brace still available? I have a leaking oil pan and would be interested in getting one.

08-10-2009, 07:14 AM	#21
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	THERE are a few ready to go

09-09-2009, 10:24 AM	#22
TimeMachine The Newbie Join Date: Sep 2009 Posts: 7 Rep Power: 0	I'd like to order one ASAP, I shall PM you with details

03-22-2010, 08:30 PM	#24
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	I have a new batch ready to ship with the bolts and o-ring The price of the steel went up but the price will be the same .

05-17-2010, 06:29 PM	#26
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	They are $125 includes shipping $129 paypal .Includes high grade longer pan bolts (19) and longer motor mount bolts (6) . This is the only one with a milled groove to clear the pinch rail on the stock pan,so full presure is applied to the pan .

01-23-2011, 02:50 PM	#27
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 2,089 Rep Power: 20	I want to pick up one of these. What is your paypal?

01-24-2011, 06:18 AM	#28
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	garfinklemw@gmail.com

02-07-2011, 03:13 AM	#30
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	I think Howard Coleman does ,he uses them on the engines he builds .This is the only brace with a milled groove to fit over the pans pinch rail so full pressure is given across the rail .I drill the two missing holes in the late model pans and use all 19 ( included ) 6mm bolts .I notch the motor mount to clear the new bolt head . The motor mount bolts and the oil level sensor o-ring come with it as well .