Oem Electrical Connectors

JustJeff · 03-02-2011, 10:41 AM

TTT- I'm using stock ECU...well Rtek but, you get the point. Before my engine goes back in I'm replacing any suspect areas.

***TitaniumTT*** · 03-02-2011, 11:09 AM

There's probably going to be more suspect area's than you think on a 25 year old harness. I've run into issues where the copper gets so brittle that I've broken it crimping butt connectors in, and then wrapping the entire chassis harness. Infact, hours before I was getting ready to leave on my epic road adventure, I noticed my front markers were out. Turned out to be a buttsplice that broke the wires and was only making intermittat contact. Pulled the bumper, fender and unwrapped most of the chassis harness hunting down that break. Sucked balls. Think of what might happen if that happens with say an injector on a boosted engine..... pop goes the rotary

My5ABaby · 03-02-2011, 03:35 PM

Quote:

Originally Posted by TitaniumTT

Think of what might happen if that happens with say an injector on a boosted engine..... pop goes the rotary

N/A > Boooooost

JustJeff · 03-02-2011, 06:48 PM

Quote:

Originally Posted by TitaniumTT

There's probably going to be more suspect area's than you think on a 25 year old harness. I've run into issues where the copper gets so brittle that I've broken it crimping butt connectors in, and then wrapping the entire chassis harness. Infact, hours before I was getting ready to leave on my epic road adventure, I noticed my front markers were out. Turned out to be a buttsplice that broke the wires and was only making intermittat contact. Pulled the bumper, fender and unwrapped most of the chassis harness hunting down that break. Sucked balls. Think of what might happen if that happens with say an injector on a boosted engine..... pop goes the rotary

Agreed. I'm going over everything. It's been an ongoing battle ever since I started tweeking things from having my swap done a few years ago. The guy who did my wiring for my TPS, to extend the N/A plugs to meet where the turbo wiring should meet.....well lets just say it was subpar. I'll post up pics for your shock and amusement later tonight.

vex · 03-02-2011, 03:40 PM

Lies!

***TitaniumTT*** · 03-02-2011, 04:36 PM

Blasphmer!!!

***TitaniumTT*** · 03-02-2011, 07:11 PM

When it comes to wiring, very little shocks me anymore.... it just amuzes.... sorry it happened to you though.

Just makes me wonder how many mytery fails are due to poor wiring

JustJeff · 03-03-2011, 01:37 AM

This was what I found after I started having engine problems shortly after my swap. The fuzzy picture is a cheap speaker wire someone used as a patch. Not only was it the cheapest of wire you could imagine, but the copper was corroded from one end to the other. All the dark area inside the insulation and also on the center area of the crimp is corrosion. The wire was corroded enough that the corrosion bled thru the crimp. The wire spliced in looked like it sat in the bottom of a damp trunk for sometime BEFORE it was used.

The other problems I had with almost every crimp the person made was that they didn't trim the insulation back far enough on just about any of the crimps. I had a few crimps that came apart in my hands while trying to test and adjust my TPS.

This is my replacement of the bad TPS. I swapped some from an N/A bracket to a turbo bracket and went over all the splices with solder.

JustJeff · 03-03-2011, 05:36 PM

This is a little more on topic. I was trying to replace my water thermosensor plug on the back of the waterpump housing. I have what I thought were two spare S5 N/A harnesses to steal parts from. At first I thought this was a water thermosensor plug...but the notches are on the opposite side.

I'm thinking of taking a dremel to it and simply making a notch.

JustJeff · 03-06-2011, 03:25 PM

Can anyone help me with a description of these terminals/connectors? It's from a S5 Thermosensor plug. Rather than splice some old wires into my harness I'd prefer to get new connectors and use new wiring.

I'd also love to find a new thermosensor plug like the previous post. But I'm having trouble with what to put in my searches on Mouser and similar sites. It's rectangular, female, two position, green. If anyone can help with how to narrow my search I'd be very grateful.

jerry51 · 06-06-2019, 03:44 AM

try https://www.allicdata.com/products.html

they might have the connectors.

speedjunkie · 06-07-2019, 11:10 PM

8 year resurrection! But for future reference...

https://www.bmotorsports.com/shop/in.../cPath/109_172

www.corsa-technic.com

http://www.easternbeaver.com/Main/El...onnectors.html

Corsa-Technic is the one I normally use. And if what you're looking for isn't on their site, you can contact them and they'll find it for you. They've done it for me once already.

vex · 05-02-2020, 06:08 PM

OHhhhhhhh Nice.

03-02-2011, 11:09 AM	#2
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	There's probably going to be more suspect area's than you think on a 25 year old harness. I've run into issues where the copper gets so brittle that I've broken it crimping butt connectors in, and then wrapping the entire chassis harness. Infact, hours before I was getting ready to leave on my epic road adventure, I noticed my front markers were out. Turned out to be a buttsplice that broke the wires and was only making intermittat contact. Pulled the bumper, fender and unwrapped most of the chassis harness hunting down that break. Sucked balls. Think of what might happen if that happens with say an injector on a boosted engine..... pop goes the rotary __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

03-02-2011, 03:40 PM	#5
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. iTrader: (6) Posts: 2,113 Rep Power: 19	Lies! __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group

03-02-2011, 04:36 PM	#6
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Blasphmer!!! __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

03-02-2011, 07:11 PM	#7
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	When it comes to wiring, very little shocks me anymore.... it just amuzes.... sorry it happened to you though. Just makes me wonder how many mytery fails are due to poor wiring __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

05-02-2020, 06:08 PM	#13
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. iTrader: (6) Posts: 2,113 Rep Power: 19	OHhhhhhhh Nice. __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group

03-02-2011, 10:41 AM	#1
JustJeff RCC Contributor Join Date: Mar 2008 iTrader: (1) Posts: 505 Rep Power: 17	TTT- I'm using stock ECU...well Rtek but, you get the point. Before my engine goes back in I'm replacing any suspect areas.

03-03-2011, 01:37 AM	#8
JustJeff RCC Contributor Join Date: Mar 2008 iTrader: (1) Posts: 505 Rep Power: 17	This was what I found after I started having engine problems shortly after my swap. The fuzzy picture is a cheap speaker wire someone used as a patch. Not only was it the cheapest of wire you could imagine, but the copper was corroded from one end to the other. All the dark area inside the insulation and also on the center area of the crimp is corrosion. The wire was corroded enough that the corrosion bled thru the crimp. The wire spliced in looked like it sat in the bottom of a damp trunk for sometime BEFORE it was used. The other problems I had with almost every crimp the person made was that they didn't trim the insulation back far enough on just about any of the crimps. I had a few crimps that came apart in my hands while trying to test and adjust my TPS. This is my replacement of the bad TPS. I swapped some from an N/A bracket to a turbo bracket and went over all the splices with solder.

03-03-2011, 05:36 PM	#9
JustJeff RCC Contributor Join Date: Mar 2008 iTrader: (1) Posts: 505 Rep Power: 17	This is a little more on topic. I was trying to replace my water thermosensor plug on the back of the waterpump housing. I have what I thought were two spare S5 N/A harnesses to steal parts from. At first I thought this was a water thermosensor plug...but the notches are on the opposite side. I'm thinking of taking a dremel to it and simply making a notch.

03-06-2011, 03:25 PM	#10
JustJeff RCC Contributor Join Date: Mar 2008 iTrader: (1) Posts: 505 Rep Power: 17	Can anyone help me with a description of these terminals/connectors? It's from a S5 Thermosensor plug. Rather than splice some old wires into my harness I'd prefer to get new connectors and use new wiring. I'd also love to find a new thermosensor plug like the previous post. But I'm having trouble with what to put in my searches on Mouser and similar sites. It's rectangular, female, two position, green. If anyone can help with how to narrow my search I'd be very grateful.

06-06-2019, 03:44 AM	#11
jerry51 The Newbie Join Date: Jun 2019 iTrader: (0) Posts: 1 Rep Power: 0	try https://www.allicdata.com/products.html they might have the connectors.

06-07-2019, 11:10 PM	#12
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO iTrader: (1) Posts: 2,089 Rep Power: 19	8 year resurrection! But for future reference... https://www.bmotorsports.com/shop/in.../cPath/109_172 www.corsa-technic.com http://www.easternbeaver.com/Main/El...onnectors.html Corsa-Technic is the one I normally use. And if what you're looking for isn't on their site, you can contact them and they'll find it for you. They've done it for me once already.