wheel/tire fitment pic thread

infernosg · 07-23-2010, 07:33 AM

My setup is by no means aggressive, but I suppose it's still somewhat useful information.

Wheels- Enkei RPF1
Sizes/offsets- 16x8 +32 F/R
Tires- Toyo T1-R
Sizes- 225/50R16 F/R
Optional info- Unmolested fenders, Stance GR+ Coilovers, AWR Rear Adjustable Camber Links, Camber bolts on front struts, -1.5 deg camber F/R, 0 toe F/R

The tires are a little stretched, but I was worried about trying to fit 245/45R16's. With camber plates and bolts in the front there is literally 1/8" of space between the tire and spring perch and it's damn near flush with the fender. I will try the 245's next, at least in the rear where there is plenty of space, but I want a square setup. I'm am a little worried about the fronts, but the overall tire width should not change.

The rear camber is not ideal (-1 would be nice) but I've pretty much max'd out the camber adjustment on the passenger's side. I plan on adding an adjustable lateral link to dial out most of the initial negative camber then use the camber links to make the sides equal. With this I'd like to lower the rear another 0.25".

Sorry for the large pictures...

RotorDad · 07-23-2010, 11:10 AM

Quote:

Originally Posted by speedjunkie

Do you have specs on your setup RotorDad? I assume the rears are 335 LOL. Looks mean!!

Woops sorry forgot to put the specs up. I don't remember the offsets off hand, I would have to pull the wheel to see. BTW thanks man.
Wheels : Simmons of Australia "Altas"
Size: 17"x10.5" front & 17"x12" rear
Tires: Kuhmo Ecsta V700's
Size: 275/40-17 front & 335/35-17 rear
Suspension: Tokico Illuminas, RB front end lowering kit, Eibach's on coilover sleeves ect. Pretty simple here front end needs to be lowered, but I have it up to get on to ramps & a trailer for now.

RotorDad · 07-23-2010, 11:18 AM

Quote:

Originally Posted by Phoenix7

I FORGOT YOU HAD THE MARIAH WIDEBODY!!!

Yeah I have what alot of guys on the other forum say is ugly LOL. One guy actually said my car made him want to puke.

They don't seem to appreciate the work involved oh well.

Phoenix7 · 07-23-2010, 02:08 PM

Quote:

Originally Posted by RotorDad

Yeah I have what alot of guys on the other forum say is ugly LOL. One guy actually said my car made him want to puke.

They don't seem to appreciate the work involved oh well.

to them if it doesn't stretch the tires, it's not the GP sports kit/knock-off, doesn't have useless camber or 1/4" off the ground then it's not cool at all.

speedjunkie · 07-23-2010, 03:20 PM

Quote:

Originally Posted by infernosg

My setup is by no means aggressive, but I suppose it's still somewhat useful information.

It doesn't have to be aggressive, and believe it or not, you probably are helping or will end up helping someone decide on a setup for their own vehicle by posting your info, so thank you! That's why I wanted this thread.

RotorDad · 07-23-2010, 04:55 PM

Quote:

Originally Posted by Phoenix7

to them if it doesn't stretch the tires, it's not the GP sports kit/knock-off, doesn't have useless camber or 1/4" off the ground then it's not cool at all.

Funny that you said that, because I told them the same thing.

iani1.1 · 11-19-2010, 06:08 AM

Wheels- Mustang SC Reps
Sizes/offsets- 17x9 +25 (F) 17x10 +20 (R)
Tires- Federal 595
Sizes- 205/45(F) 225/45(R)
Optional info- Has rear overfenders with 8mm spacers. ill post updated pics when its not cold or dark outside

josh18_2k · 11-19-2010, 02:02 PM

17X10 +6 255/40/17
18X10.5 +7 275/35/18
(not sure on offsets, i dont remember which spacers were where lol)

and the srs rubber-
18x10 +14 285/30/18
17x10.5 +12 315/35/17

oh look! ^ you can see my rim. streched tires all siiiiick

ok im done whoring

iani1.1 · 11-19-2010, 04:45 PM

hm, how big are those front fenders? 30mm?

Buggy · 11-19-2010, 06:51 PM

Here's the setup on my FC

Rims: Fast FC01's 17"X8" + 40 on all 4 corners.
Tires: Sumitomo HTRZIII
225/45R17's up front
255/40R17's in the rear.
Stock everything with baseball bat rolled front fenders.

Unfortunately I don't think I have any pics with those tires on the rims. I do have pics though with crappy 215/50R17's on. They looked terrible on the rims though... The new tires look WAY better.

rx7s 004.jpg rx7s 003.jpg rx7s 001.jpg

josh18_2k · 11-21-2010, 06:57 PM

corksport fronts are ~30ish. its kinda hard to measure something like that.
shine fenders are only 20, dont believe their lies lol

speedjunkie · 11-21-2010, 10:12 PM

Did the Shine fenders run wider than 20 or not as wide?

MaczPayne · 11-22-2010, 03:47 PM

They advertise 30, but are actually 20

infernosg · 01-28-2013, 12:22 PM

Quote:

Originally Posted by josh18_2k

corksport fronts are ~30ish. its kinda hard to measure something like that.
shine fenders are only 20, dont believe their lies lol

Quote:

Originally Posted by MaczPayne

They advertise 30, but are actually 20

Old thread is old. Anyone know if this is still true or if they actually stepped up to +30? Trying to figure out what I'd need to fit a 255/40R17 on 17x9 +22 or a 275/40R17 on 17x9.5 +18. I know front fenders are required but trying to figure out if the Shine fenders would be enough and if I'd need rear over fenders as well. The deltas are something like +30 outward and -2 inward over my current setup (225/50R16 on 16x8 +32 running -1 deg of camber all around).

07-23-2010, 07:33 AM	#16
infernosg IT'S ALIVE! Join Date: Dec 2009 Location: Richmond, VA iTrader: (5) Posts: 811 Rep Power: 15	My setup is by no means aggressive, but I suppose it's still somewhat useful information. Wheels- Enkei RPF1 Sizes/offsets- 16x8 +32 F/R Tires- Toyo T1-R Sizes- 225/50R16 F/R Optional info- Unmolested fenders, Stance GR+ Coilovers, AWR Rear Adjustable Camber Links, Camber bolts on front struts, -1.5 deg camber F/R, 0 toe F/R The tires are a little stretched, but I was worried about trying to fit 245/45R16's. With camber plates and bolts in the front there is literally 1/8" of space between the tire and spring perch and it's damn near flush with the fender. I will try the 245's next, at least in the rear where there is plenty of space, but I want a square setup. I'm am a little worried about the fronts, but the overall tire width should not change. The rear camber is not ideal (-1 would be nice) but I've pretty much max'd out the camber adjustment on the passenger's side. I plan on adding an adjustable lateral link to dial out most of the initial negative camber then use the camber links to make the sides equal. With this I'd like to lower the rear another 0.25". Sorry for the large pictures... __________________ '86 Mazda RX-7 Base '79 Mazda RX-7 GS

11-19-2010, 02:02 PM	#23
josh18_2k Rotary Fanatic Join Date: Feb 2008 Location: Gresham, OR iTrader: (0) Posts: 473 Rep Power: 17	17X10 +6 255/40/17 18X10.5 +7 275/35/18 (not sure on offsets, i dont remember which spacers were where lol) and the srs rubber- 18x10 +14 285/30/18 17x10.5 +12 315/35/17 oh look! ^ you can see my rim. streched tires all siiiiick ok im done whoring __________________ Last edited by josh18_2k; 11-19-2010 at 02:10 PM..

11-19-2010, 06:51 PM	#25
Buggy I've been Wankeled! Join Date: Apr 2010 Location: Mildmay, Ontario, Canada iTrader: (0) Posts: 260 Rep Power: 15	Here's the setup on my FC Rims: Fast FC01's 17"X8" + 40 on all 4 corners. Tires: Sumitomo HTRZIII 225/45R17's up front 255/40R17's in the rear. Stock everything with baseball bat rolled front fenders. Unfortunately I don't think I have any pics with those tires on the rims. I do have pics though with crappy 215/50R17's on. They looked terrible on the rims though... The new tires look WAY better. rx7s 004.jpg rx7s 003.jpg rx7s 001.jpg __________________ 1976 Rx-4 hardtop. Half bridge 3B 13B, S5 NA rotors, Renesis e-shaft, stat gears, and bearings, balanced rotating assembly, RE dual weber 36 DCD's 203rwhp 137ft-lbs torque DGRR 2011 3rd place 1974 Rx-4 all original 27,000 miles 1988 Rx-7 TII 320rwhp. DGRR 2012 3rd place

11-21-2010, 06:57 PM	#26
josh18_2k Rotary Fanatic Join Date: Feb 2008 Location: Gresham, OR iTrader: (0) Posts: 473 Rep Power: 17	corksport fronts are ~30ish. its kinda hard to measure something like that. shine fenders are only 20, dont believe their lies lol __________________

11-22-2010, 03:47 PM	#28
MaczPayne Bah! Join Date: Mar 2008 Location: Riverside, SoCal iTrader: (1) Posts: 442 Rep Power: 17	They advertise 30, but are actually 20 __________________ Johnson TA FC in the works!

11-19-2010, 06:08 AM	#22
iani1.1 brap brap Join Date: Sep 2009 iTrader: (1) Posts: 42 Rep Power: 0	Wheels- Mustang SC Reps Sizes/offsets- 17x9 +25 (F) 17x10 +20 (R) Tires- Federal 595 Sizes- 205/45(F) 225/45(R) Optional info- Has rear overfenders with 8mm spacers. ill post updated pics when its not cold or dark outside

11-19-2010, 04:45 PM	#24
iani1.1 brap brap Join Date: Sep 2009 iTrader: (1) Posts: 42 Rep Power: 0	hm, how big are those front fenders? 30mm?

11-21-2010, 10:12 PM	#27
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO iTrader: (1) Posts: 2,089 Rep Power: 19	Did the Shine fenders run wider than 20 or not as wide?