AutoEXE 20b GTX-R 4294 DrySump RE-A ADGT Widebody

***Herblenny*** · 08-31-2012, 11:32 AM

Nice! Can't wait to see it!! You think you'll be ready for DGRR 2013??

MotoTek · 09-01-2012, 11:39 AM

docmar, if you think this is impressive. Go check out To_slow and Herblenny's build threads! You'll be even more impressed.

Phil, possibly. I graduate next May, so with that and trying to finish my senior project I might be way to busy. If there's even a chance I can come, I will be there.

MotoTek · 10-19-2012, 09:43 PM

Not sure if any of you cant check the other place, so here ya go.

RCCAZ 1 · 10-19-2012, 11:02 PM

Argh.... damn you and that beautiful RED FEED cluster

Let me know if you ever decide to part with it or feel a desire to trade me for my low kilometer Amemiya cluster plus some $$$ from me

I love pop-up lights · 10-19-2012, 11:12 PM

Holy list of baller parts Batman!

It's like a wet dream shopping list for a lot of FD owners

Nice choices, car is looking sexy already.

WankelsRevenge · 10-20-2012, 01:20 AM

Plan on going with a FMIC setup for that thing?

MotoTek · 10-20-2012, 03:47 PM

RCCAZ 1, it took me a couple years to get my hands on this one. Although, I'll let you know first if it ever does leave my possession. I'm debating on whether I should give it some 21st century upgrades with LED's , or not. The lights now don't put out a linear pattern and are very dim.

I love pop-up lights. Thank you sir. There's still a few more wet dream rare parts I need to finish it off. Phil, has some fender mirrors I really want, I think I just need to buy them new because he's for sure not letting them go. Haha can't wait for you guys to see the motor finished.

WankelsRevenge, yes sir. I'm having a custom one made to fill that giant gap.

WankelsRevenge · 10-20-2012, 10:02 PM

Nice, I swear basically all RE-A bodykits were made for front mount setups

MotoTek · 10-22-2012, 11:53 AM

Built the crate yesterday to send off to Chips Motorsports aka To_Slow.

MazdaMike · 10-23-2012, 02:16 PM

Awesome build. Cant wait to see the finished product.

MotoTek · 11-12-2012, 07:38 PM

Engine: Tear down. The guy (Japan2LA/Brian Galloway) who sold me the motor said everything was brand new. As you can see, that's not the case. All new rotors and housing will need to be purchased and the irons will need re-nitrated due to all the step-wear. Unfortunately, for me I waited to long to have the engine built, but I will be still be perusing the matter for what it's worth.

Work is being done by Chips Motorports.

3 x destroyed rotors

3 x destroyed housings

Irons with step wear

Suspension: Media blasting.

Before:

After:

***TitaniumTT*** · 11-12-2012, 10:10 PM

Unfortuneately that's something that I've heard alot of with Brian Galloway/Japan2LA

Awesome build otherwise though. Chip will take care of you, he is the man! Helped me out big time with my current engine

Red Baron · 11-13-2012, 12:41 PM

Can't wait to see the sum of the parts.

muibubbles · 12-04-2012, 03:28 AM

Oh, I found you on here too Model Mike =)

WE3RX7 · 12-04-2012, 09:07 AM

Sorry to hear about that engine! Hope you get it squared away though. Looks like a great build...

08-31-2012, 11:32 AM	#16
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 iTrader: (11) Posts: 644 Rep Power: 10	Nice! Can't wait to see it!! You think you'll be ready for DGRR 2013?? __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

09-01-2012, 11:39 AM	#17
MotoTek Always Under Construction Join Date: Mar 2008 Location: La Playa, CA iTrader: (1) Posts: 302 Rep Power: 17	docmar, if you think this is impressive. Go check out To_slow and Herblenny's build threads! You'll be even more impressed. Phil, possibly. I graduate next May, so with that and trying to finish my senior project I might be way to busy. If there's even a chance I can come, I will be there. __________________ BLACKADDE™ \| ADGT RX7 \|

10-19-2012, 09:43 PM	#18
MotoTek Always Under Construction Join Date: Mar 2008 Location: La Playa, CA iTrader: (1) Posts: 302 Rep Power: 17	Not sure if any of you cant check the other place, so here ya go. __________________ BLACKADDE™ \| ADGT RX7 \|

10-20-2012, 03:47 PM	#22
MotoTek Always Under Construction Join Date: Mar 2008 Location: La Playa, CA iTrader: (1) Posts: 302 Rep Power: 17	RCCAZ 1, it took me a couple years to get my hands on this one. Although, I'll let you know first if it ever does leave my possession. I'm debating on whether I should give it some 21st century upgrades with LED's , or not. The lights now don't put out a linear pattern and are very dim. I love pop-up lights. Thank you sir. There's still a few more wet dream rare parts I need to finish it off. Phil, has some fender mirrors I really want, I think I just need to buy them new because he's for sure not letting them go. Haha can't wait for you guys to see the motor finished. WankelsRevenge, yes sir. I'm having a custom one made to fill that giant gap. __________________ BLACKADDE™ \| ADGT RX7 \|

10-22-2012, 11:53 AM	#24
MotoTek Always Under Construction Join Date: Mar 2008 Location: La Playa, CA iTrader: (1) Posts: 302 Rep Power: 17	Built the crate yesterday to send off to Chips Motorsports aka To_Slow. __________________ BLACKADDE™ \| ADGT RX7 \|

10-19-2012, 11:02 PM	#19
RCCAZ 1 Rotary Fanatic Join Date: Mar 2008 Location: Phoenix, AZ iTrader: (0) Posts: 288 Rep Power: 17	Argh.... damn you and that beautiful RED FEED cluster Let me know if you ever decide to part with it or feel a desire to trade me for my low kilometer Amemiya cluster plus some $$$ from me

10-23-2012, 02:16 PM	#25
MazdaMike S4 Owner Join Date: Jun 2008 Location: Tottenham, ON, Canada iTrader: (0) Posts: 48 Rep Power: 0	Awesome build. Cant wait to see the finished product. __________________ 1985 Mazda RX7 GSL 13B, Holley etc 1997 Mazda MX6 LS - DD lowered on 17s

11-12-2012, 07:38 PM	#26
MotoTek Always Under Construction Join Date: Mar 2008 Location: La Playa, CA iTrader: (1) Posts: 302 Rep Power: 17	Engine: Tear down. The guy (Japan2LA/Brian Galloway) who sold me the motor said everything was brand new. As you can see, that's not the case. All new rotors and housing will need to be purchased and the irons will need re-nitrated due to all the step-wear. Unfortunately, for me I waited to long to have the engine built, but I will be still be perusing the matter for what it's worth. Work is being done by Chips Motorports. 3 x destroyed rotors 3 x destroyed housings Irons with step wear Suspension: Media blasting. Before: After: __________________ BLACKADDE™ \| ADGT RX7 \| Last edited by MotoTek; 11-12-2012 at 08:06 PM..

11-12-2012, 10:10 PM	#27
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Unfortuneately that's something that I've heard alot of with Brian Galloway/Japan2LA Awesome build otherwise though. Chip will take care of you, he is the man! Helped me out big time with my current engine __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

11-13-2012, 12:41 PM	#28
Red Baron The Newbie Join Date: Mar 2009 iTrader: (0) Posts: 19 Rep Power: 0	Can't wait to see the sum of the parts.

12-04-2012, 03:28 AM	#29
muibubbles Bubble Tech Join Date: Oct 2008 iTrader: (0) Posts: 161 Rep Power: 16	Oh, I found you on here too Model Mike =) __________________ Bubble Tech www.BubbleTech.us

12-04-2012, 09:07 AM	#30
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA iTrader: (1) Posts: 1,812 Rep Power: 18	Sorry to hear about that engine! Hope you get it squared away though. Looks like a great build...