93 BB base FD build-up

Chadwick · 03-05-2008, 11:02 AM

Updated write up with links to most parts used.

Dan

fikren · 03-05-2008, 11:07 AM

Are you going to be running the 4 secondary injectors or just 2? The exessive LIM is set up for 4 or can be used with 4 can't it?

Chadwick · 03-05-2008, 11:26 AM

Quote:

Originally Posted by fikren

Are you going to be running the 4 secondary injectors or just 2? The exessive LIM is set up for 4 or can be used with 4 can't it?

You can use 4, but I will only be using 2 1600cc.

Funny you should bring that up though; I was in an interesting conversation with Ari from Rotary Performance about the fuel wall that the primaries create because they inject fuel at a 90 degree angle to the airflow. He pointed out that the secondary injectors are at far better angle to flow. With 550 primaries, it is not such a big issue but the larger they get the more of a wall is created. I considered moving the primary's to the LIM but didn't want to screw with making a custom fuel rail at this point.

If my horsepower goals were higher or I was using larger primaries, I would without question move the primaries to the Xcessive LIM.

Dan

2MCHPWR · 03-05-2008, 04:01 PM

hot ride.
what hole do you use on the TP bar?
what neg camber do you run?
are you keeping the spring rates and happy with the?

Chadwick · 03-05-2008, 04:20 PM

Quote:

Originally Posted by 2MCHWPR

hot ride.
what hole do you use on the TP bar?
what neg camber do you run?
are you keeping the spring rates and happy with the?

I was full firm on a .188 bar
I run -2 all the way around.
I will start out on the current springs as I'm comfortable with the way the car handles. I may increase them to something closer to what Andy and Erik run when I change out to 28 series Koni's.

Dan

fikren · 03-05-2008, 06:38 PM

Quote:

Originally Posted by Chadwick

You can use 4, but I will only be using 2 1600cc.

Funny you should bring that up though; I was in an interesting conversation with Ari from Rotary Performance about the fuel wall that the primaries create because they inject fuel at a 90 degree angle to the airflow. He pointed out that the secondary injectors are at far better angle to flow. With 550 primaries, it is not such a big issue but the larger they get the more of a wall is created. I considered moving the primary's to the LIM but didn't want to screw with making a custom fuel rail at this point.

If my horsepower goals were higher or I was using larger primaries, I would without question move the primaries to the Xcessive LIM.

Dan

Thats interesting about the primaries into the secondary on the Xcessive LIM. On another note, I wonder in theory if it would be more benificial to run 4 smaller cc injectors for the secondary rather than 2 larger ones.

Chadwick · 03-05-2008, 10:41 PM

Quote:

Originally Posted by fikren

Thats interesting about the primaries into the secondary on the Xcessive LIM. On another note, I wonder in theory if it would be more benificial to run 4 smaller cc injectors for the secondary rather than 2 larger ones.

You really can't because the 4 injector holes on the X-LIM are 2 primary and 2 secondary.

fikren · 03-05-2008, 10:45 PM

ah ok, for some reason I was under the impression they were another set of secondaries, upon looking at some pictures of it, I'm following how its set up now.

Chadwick · 03-09-2008, 05:14 PM

Updated the build with a few new pictures of the wing install and wider wheel, also learned not to leave friends unattended:

I was sanding on the Corvette's front bumper getting it ready to be painted and kicked up a lot of dust in the process. Brian took the opportunity to let me know that I should be building the motor for the 7 and not wasting my time on the Corvette.

Dan

ACowden20 · 03-09-2008, 09:00 PM

That wasn't Brian that did that, I did. Brian added the second comment not pictured. And your right, you should never leave us unattended in the shop.

You did say you wanted the bumper and hood primered black when you get back, right?

sbrian2 · 03-10-2008, 09:42 AM

Actually Richard made the second comment, not me. BTW, I'm that good looking guy that keeps popping up in the pics, but you don't see my face. I feel kinda like Wilson on Home Improvement.

85rx-7gsl-se · 03-10-2008, 11:05 AM

Cowden and Brian, glad to have ya. Its always nice to have some Tennspeed guys on here

ACowden20 · 03-10-2008, 06:36 PM

We are here b/c we are "Chadwick's bitches". But he does feed us every once and awhile for our time. Just making sure he isn't fibbing about who's doing his work sometimes.

Chadwick · 03-10-2008, 07:01 PM

Actually if the truth be known, they do more work on my car than I do. I’m just there for the comic relief.

Dan

85rx-7gsl-se · 03-10-2008, 09:18 PM

Hey, its all good. Matt and Adler are Charles' worker bees

03-05-2008, 11:02 AM	#16
Chadwick Rotary Fanatic Join Date: Feb 2008 Location: Smyrna, TN, USA iTrader: (3) Posts: 239 Rep Power: 17	Updated write up with links to most parts used. Dan __________________ 93 RX7 BB (Race Car) 93 RX7 SSM (Soon to be IBM and a daily driver) 05 Silverado Z71 08 Mini Cooper 80 LS RX7 (for sale)

03-05-2008, 11:07 AM	#17
fikren Rotary Fanatic Join Date: Feb 2008 Location: Chattanooga, TN iTrader: (7) Posts: 318 Rep Power: 17	Are you going to be running the 4 secondary injectors or just 2? The exessive LIM is set up for 4 or can be used with 4 can't it? __________________ 93 bb rx7 Destined to be the never ending project car or possible part source for the rotary rat rod 2008 40th Anniversary Edition RX-8 - bankruptcy owned me RE-Amemiya Super Dolphin Tail Exhaust-for sale AutoExe Front and Rear Strut Bars-for sale AutoExe Member Brace Set-for sale 2008 Honda CBR600RR - bankruptcy owned me Motivation axle/fork/barend/frame sliders ASV "unbreakable" shorty levers Tripage Integrated Tailight and Adj FE Proton Fushmounts Akrapovic Hex Carbon/TI Slip On Sato Rearsets

03-05-2008, 10:45 PM	#23
fikren Rotary Fanatic Join Date: Feb 2008 Location: Chattanooga, TN iTrader: (7) Posts: 318 Rep Power: 17	ah ok, for some reason I was under the impression they were another set of secondaries, upon looking at some pictures of it, I'm following how its set up now. __________________ 93 bb rx7 Destined to be the never ending project car or possible part source for the rotary rat rod 2008 40th Anniversary Edition RX-8 - bankruptcy owned me RE-Amemiya Super Dolphin Tail Exhaust-for sale AutoExe Front and Rear Strut Bars-for sale AutoExe Member Brace Set-for sale 2008 Honda CBR600RR - bankruptcy owned me Motivation axle/fork/barend/frame sliders ASV "unbreakable" shorty levers Tripage Integrated Tailight and Adj FE Proton Fushmounts Akrapovic Hex Carbon/TI Slip On Sato Rearsets

03-09-2008, 05:14 PM	#24
Chadwick Rotary Fanatic Join Date: Feb 2008 Location: Smyrna, TN, USA iTrader: (3) Posts: 239 Rep Power: 17	Updated the build with a few new pictures of the wing install and wider wheel, also learned not to leave friends unattended: I was sanding on the Corvette's front bumper getting it ready to be painted and kicked up a lot of dust in the process. Brian took the opportunity to let me know that I should be building the motor for the 7 and not wasting my time on the Corvette. Dan __________________ 93 RX7 BB (Race Car) 93 RX7 SSM (Soon to be IBM and a daily driver) 05 Silverado Z71 08 Mini Cooper 80 LS RX7 (for sale) Last edited by Chadwick; 03-09-2008 at 06:51 PM..

03-10-2008, 07:01 PM	#29
Chadwick Rotary Fanatic Join Date: Feb 2008 Location: Smyrna, TN, USA iTrader: (3) Posts: 239 Rep Power: 17	Actually if the truth be known, they do more work on my car than I do. I’m just there for the comic relief. Dan __________________ 93 RX7 BB (Race Car) 93 RX7 SSM (Soon to be IBM and a daily driver) 05 Silverado Z71 08 Mini Cooper 80 LS RX7 (for sale)

03-05-2008, 04:01 PM	#19
2MCHPWR The Newbie Join Date: Mar 2008 Location: NY iTrader: (0) Posts: 19 Rep Power: 0	hot ride. what hole do you use on the TP bar? what neg camber do you run? are you keeping the spring rates and happy with the?

03-09-2008, 09:00 PM	#25
ACowden20 The Newbie Join Date: Mar 2008 iTrader: (0) Posts: 11 Rep Power: 0	That wasn't Brian that did that, I did. Brian added the second comment not pictured. And your right, you should never leave us unattended in the shop. You did say you wanted the bumper and hood primered black when you get back, right?

03-10-2008, 09:42 AM	#26
sbrian2 Rotary Wannabee Join Date: Mar 2008 Location: M'boro TN iTrader: (0) Posts: 50 Rep Power: 17	Actually Richard made the second comment, not me. BTW, I'm that good looking guy that keeps popping up in the pics, but you don't see my face. I feel kinda like Wilson on Home Improvement.

03-10-2008, 06:36 PM	#28
ACowden20 The Newbie Join Date: Mar 2008 iTrader: (0) Posts: 11 Rep Power: 0	We are here b/c we are "Chadwick's bitches". But he does feed us every once and awhile for our time. Just making sure he isn't fibbing about who's doing his work sometimes.