Craig's Project JDM FD3S UK Style - Page 2

Topgear · 12-13-2011, 04:12 PM

Well all done now got my greddy elbow on and made up a link pipe, I'm still waiting on my riat temp sensor which I'm going to mount in the cold link pipe

Topgear · 12-13-2011, 04:13 PM

Well this weeks not been fun I found a major fuel leak on the primary injectors so off comes the upper manifold again lol

The seals where well fduked but a good friend has got some off pip for me which I'm hoping to fit tomorrow.

While I was there I've started to relocate the coils off the top of the engine

Ive also secured the simple rats nests alot better anyway here's a few pics

Topgear · 12-13-2011, 04:14 PM

Well now the exhaust has bedded in I tested it with my iPhone app and at idle it was 90-91db which is Fduking top

And ive now started on the body work

Topgear · 12-13-2011, 04:15 PM

Oh and I had to show you my friends engine

Half Bridge running HKS TO4Z

So wish mine looked like that lol

Topgear · 12-13-2011, 04:16 PM

I seemed to have re posted the same coil photos lol

Managed to get a little done tonight

And my new GT spoiler

I'm not going to be using the legs that came with it, I want to have the legs coming up from the rear bumper real GT style more to come on this

Does anyone have a photo of the rear panel of the rx7 with the bumper removed I've forgot how it looks under there now

Topgear · 12-13-2011, 04:17 PM

Guys my turbo came

So here now just need to sort a few more parts then I'm single baby

Topgear · 12-13-2011, 04:19 PM

Here are a few pics from an open day we had this year

Topgear · 12-13-2011, 04:20 PM

Started moving more stuff for my future plans

First of all the front washer bottle has gone and I'm now using the rear bottle for my front washers

I've also direct wired my coils

and moved the smaller engine fuse box into the car.

Ive also now got rid of the diagnostic port

Ordered my secondary injector rail now from Dale at DM-Motorsport

What's the best way to go guys with the injectors I was thinking id2000s but 1680s seem so more common an it's what my friend Jake runs in his.

Here's jakes and mine first time they have met awwww

Topgear · 12-13-2011, 04:21 PM

The engine is stock ports

My spec will be

Garrett T04r .70 cold and .70 hot
Turbosmart hypergate 45
Manifold will be made by me
DM motorsports fuel rail
Id2000 injectors or Bosch 1680s
Turbosmart 1200 FPR
Innovate wideband mtx and datalogic
Maybe twin EGT gauges if I find a good deal on a pair one for each port
STD 550 primary's
Bosch 044 pump
3.5" downpipe into 3" downpipeback system
Trust stock mount cooler
Direct wired coils
Direct wired fuel pump
Air intake temp sensor upgrade and now in Intercooler cold pipe

Maybe water injection

Topgear · 12-13-2011, 04:23 PM

Not my car but i thought i would show you guys what i get upto at work

Here is a few photos of my work

I'm always on hand for anyone who needs some fab work doing

speedjunkie · 12-13-2011, 07:46 PM

I could swear I've seen these before, maybe it was on another forum. I love the dolphin tail exhaust and the gauge cluster for the center, so awesome.

JShiz · 12-13-2011, 08:03 PM

That's pretty awesome. I wish i had time to do stuff like that.

Topgear · 12-14-2011, 02:26 AM

Thanks guys i did start a thread in the newbe part of the forum but i never updated it so i started a new thread here.

Next week i hope to start on my new steering pump set up

Fendamonky · 12-14-2011, 11:00 AM

Looks awesome man!

I'm fairly certain I've seen this before, I don't know if it was on here or over on FDUK though.

As for the V-Mounts. I've got the RE:worx bit fitted on mine and I absolutely love it!

It seems like you're one hell of a fabricator, so I'm guessing you'll probably just make your own. If you are going for somebody elses kit though... I'd def take theirs over something like Dragon's.

Topgear · 12-14-2011, 11:36 AM

Cheers mate you have the best bumper out there

12-13-2011, 04:21 PM	#24
Topgear Rotary Fanatic Join Date: Feb 2011 Location: UK Posts: 266 Rep Power: 15	The engine is stock ports My spec will be Garrett T04r .70 cold and .70 hot Turbosmart hypergate 45 Manifold will be made by me DM motorsports fuel rail Id2000 injectors or Bosch 1680s Turbosmart 1200 FPR Innovate wideband mtx and datalogic Maybe twin EGT gauges if I find a good deal on a pair one for each port STD 550 primary's Bosch 044 pump 3.5" downpipe into 3" downpipeback system Trust stock mount cooler Direct wired coils Direct wired fuel pump Air intake temp sensor upgrade and now in Intercooler cold pipe Maybe water injection Last edited by Topgear; 12-14-2011 at 02:28 AM.

12-13-2011, 04:12 PM	#16
Topgear Rotary Fanatic Join Date: Feb 2011 Location: UK Posts: 266 Rep Power: 15	Well all done now got my greddy elbow on and made up a link pipe, I'm still waiting on my riat temp sensor which I'm going to mount in the cold link pipe

12-13-2011, 04:13 PM	#17
Topgear Rotary Fanatic Join Date: Feb 2011 Location: UK Posts: 266 Rep Power: 15	Well this weeks not been fun I found a major fuel leak on the primary injectors so off comes the upper manifold again lol The seals where well fduked but a good friend has got some off pip for me which I'm hoping to fit tomorrow. While I was there I've started to relocate the coils off the top of the engine Ive also secured the simple rats nests alot better anyway here's a few pics

12-13-2011, 04:14 PM	#18
Topgear Rotary Fanatic Join Date: Feb 2011 Location: UK Posts: 266 Rep Power: 15	Well now the exhaust has bedded in I tested it with my iPhone app and at idle it was 90-91db which is Fduking top And ive now started on the body work

12-13-2011, 04:15 PM	#19
Topgear Rotary Fanatic Join Date: Feb 2011 Location: UK Posts: 266 Rep Power: 15	Oh and I had to show you my friends engine Half Bridge running HKS TO4Z So wish mine looked like that lol

12-13-2011, 04:16 PM	#20
Topgear Rotary Fanatic Join Date: Feb 2011 Location: UK Posts: 266 Rep Power: 15	I seemed to have re posted the same coil photos lol Managed to get a little done tonight And my new GT spoiler I'm not going to be using the legs that came with it, I want to have the legs coming up from the rear bumper real GT style more to come on this Does anyone have a photo of the rear panel of the rx7 with the bumper removed I've forgot how it looks under there now

12-13-2011, 04:17 PM	#21
Topgear Rotary Fanatic Join Date: Feb 2011 Location: UK Posts: 266 Rep Power: 15	Guys my turbo came So here now just need to sort a few more parts then I'm single baby

12-13-2011, 04:19 PM	#22
Topgear Rotary Fanatic Join Date: Feb 2011 Location: UK Posts: 266 Rep Power: 15	Here are a few pics from an open day we had this year

12-13-2011, 04:20 PM	#23
Topgear Rotary Fanatic Join Date: Feb 2011 Location: UK Posts: 266 Rep Power: 15	Started moving more stuff for my future plans First of all the front washer bottle has gone and I'm now using the rear bottle for my front washers I've also direct wired my coils and moved the smaller engine fuse box into the car. Ive also now got rid of the diagnostic port Ordered my secondary injector rail now from Dale at DM-Motorsport What's the best way to go guys with the injectors I was thinking id2000s but 1680s seem so more common an it's what my friend Jake runs in his. Here's jakes and mine first time they have met awwww

12-13-2011, 04:23 PM	#25
Topgear Rotary Fanatic Join Date: Feb 2011 Location: UK Posts: 266 Rep Power: 15	Not my car but i thought i would show you guys what i get upto at work Here is a few photos of my work I'm always on hand for anyone who needs some fab work doing

12-13-2011, 07:46 PM	#26
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 2,089 Rep Power: 19	I could swear I've seen these before, maybe it was on another forum. I love the dolphin tail exhaust and the gauge cluster for the center, so awesome.

12-13-2011, 08:03 PM	#27
JShiz ZOMG WTF BBQ!!! Join Date: Mar 2008 Location: Mobile, Al Posts: 280 Rep Power: 17	That's pretty awesome. I wish i had time to do stuff like that.

12-14-2011, 02:26 AM	#28
Topgear Rotary Fanatic Join Date: Feb 2011 Location: UK Posts: 266 Rep Power: 15	Thanks guys i did start a thread in the newbe part of the forum but i never updated it so i started a new thread here. Next week i hope to start on my new steering pump set up

12-14-2011, 11:36 AM	#30
Topgear Rotary Fanatic Join Date: Feb 2011 Location: UK Posts: 266 Rep Power: 15	Cheers mate you have the best bumper out there