Rice Racing M&W CDI COP Set-up

infernosg · 04-03-2015, 06:45 AM

Quote:

Originally Posted by RICE RACING

Anyone else wanting the COP Adaptors will need to email me today and pay to get them done in this batch. thanks.

Email sent!

RICE RACING · 04-03-2015, 08:43 AM

Replied

RICE RACING · 04-07-2015, 03:36 AM

So a few people have asked me 'why' no inferior coil set ups being offered.
Put simply the c-u-n-t-s do NOT WORK!

You just can NOT run the engine the way it needs to be run when using shitty inductive coils on a rotary engine. Sure some people do, but its not recommended as you WILL have to reduce the fuel amount and increase the ignition timing to dangerous levels ALL so you can fire the plug at a lower chamber pressure earlier in the cycle, ALL of this is BAD NEWS for long term durability, especially when you have to run your engine near 12.0:1 AFR at 30psi boost pressure and 700bhp on a 13B.

Each person can do what they like, but I will not be selling nor recommending a full on kit based of shit that tunes you rather than you tuning it

Thus the full kit was dropped in that version, you can still buy the Adaptors which I will supply to people who want to do their own thing and currently have the latest versions being made for various customers

Peter

RETed · 04-07-2015, 01:47 PM

Quote:

Originally Posted by RICE RACING

So a few people have asked me 'why' no inferior coil set ups being offered.
Put simply the c-u-n-t-s do NOT WORK!

Don't you feel like a broken record AND banging your head on the wall...

-Ted

RICE RACING · 04-07-2015, 10:26 PM

Quote:

Originally Posted by RETed

Don't you feel like a broken record AND banging your head on the wall...

-Ted

Yes its FUCKED!

I don't know if it "I bought it syndrome" and its the best or what the fuck is going on? but the level of retard in general is frightening. I just had discussion with Japanese customer/shop and they understand. WTF people waste their time with inductive snake oil that never works on a rotary is totally beyond me.

The saying you can lead a horse to water............ but if it don't drink shoot the c-u-n-t and sell it as pet food is applicable to anyone promoting those totally shit house coils! Well its relative for a low powered application they may do, but again in my experience having to fix others fuck up's they wont even work at low power/boost, without misfiring so I say again what is the point of running the shit?

May as well rip the motor out and do a Coward Holeman

chibikougan · 04-07-2015, 10:37 PM

Don't forget the Glue!

RICE RACING · 04-10-2015, 03:50 AM

someone say misfire?
NOT HERE!
The TOP SPEC CUSTOM RICE RACING M&W set up, this comes configured with Hi/Lo switch input into each CDI box
150mJ & 250mJ
These are rated for constant use and NO EXCUSES
Tune the engine, dont let it tune you!

silverfdturbo6port · 04-12-2015, 09:32 PM

So its safe to say the aem smart coils are junk?
What about ls1 or yukon coils?

RICE RACING · 04-12-2015, 09:49 PM

Quote:

Originally Posted by silverfdturbo6port

So its safe to say the aem smart coils are junk?
What about ls1 or yukon coils?

Its all relative, I did a explanation for you to your email.
Suffice to say it just depends what you want to do and how particular you are, for lower end applications they are o.k.

silverfdturbo6port · 04-12-2015, 10:30 PM

Yes thank you.

chibikougan · 04-13-2015, 12:50 AM

Gimmie!

That one has some dust one it anyway. Might as well.

chibikougan · 04-13-2015, 01:04 AM

Alright back to the corner then....

C. Ludwig · 04-13-2015, 03:31 AM

Why two Drag 2 boxes and not a single Drag 4R?

RICE RACING · 04-13-2015, 03:39 AM

Quote:

Originally Posted by C. Ludwig

Why two Drag 2 boxes and not a single Drag 4R?

Simple:

The frequency of firing on the 4R and capacity for cooling means it is not rated for constant duty use. *Thus drag only recommendation*

This set up is specified to be used constantly (after much discussion between myself and Wayne at M&W we came up with this solution), at high power using one box for leading and one for trailing up to any rpm you can use on a rotary its designed to be used ALL the time

long distance race, easy.
drive 6 hours to an event, RACE, drive back home, all not a problem with this set up

Comes with custom switched Lo/Hi so it wont eat plugs when the full power is not required but enough to fire anything you can throw at it.

RICE RACING · 04-28-2015, 09:22 AM

Latest batch of COP adaptors will be finished next week ready to send out. Will email those that have ordered them then.

04-03-2015, 08:43 AM	#257
RICE RACING Don Mega Join Date: Dec 2008 Location: Utopia iTrader: (0) Posts: 1,688 Rep Power: 17	Replied __________________ www.riceracing.com.au Worlds best Apex Seals Coil on Plug Water Injection ECU Calibration

04-07-2015, 03:36 AM	#258
RICE RACING Don Mega Join Date: Dec 2008 Location: Utopia iTrader: (0) Posts: 1,688 Rep Power: 17	So a few people have asked me 'why' no inferior coil set ups being offered. Put simply the c-u-n-t-s do NOT WORK! You just can NOT run the engine the way it needs to be run when using shitty inductive coils on a rotary engine. Sure some people do, but its not recommended as you WILL have to reduce the fuel amount and increase the ignition timing to dangerous levels ALL so you can fire the plug at a lower chamber pressure earlier in the cycle, ALL of this is BAD NEWS for long term durability, especially when you have to run your engine near 12.0:1 AFR at 30psi boost pressure and 700bhp on a 13B. Each person can do what they like, but I will not be selling nor recommending a full on kit based of shit that tunes you rather than you tuning it Thus the full kit was dropped in that version, you can still buy the Adaptors which I will supply to people who want to do their own thing and currently have the latest versions being made for various customers Peter __________________ www.riceracing.com.au Worlds best Apex Seals Coil on Plug Water Injection ECU Calibration

04-10-2015, 03:50 AM	#262
RICE RACING Don Mega Join Date: Dec 2008 Location: Utopia iTrader: (0) Posts: 1,688 Rep Power: 17	someone say misfire? NOT HERE! The TOP SPEC CUSTOM RICE RACING M&W set up, this comes configured with Hi/Lo switch input into each CDI box 150mJ & 250mJ These are rated for constant use and NO EXCUSES Tune the engine, dont let it tune you! __________________ www.riceracing.com.au Worlds best Apex Seals Coil on Plug Water Injection ECU Calibration

04-12-2015, 09:32 PM	#263
silverfdturbo6port 500hp club Join Date: Feb 2011 Location: spokane iTrader: (0) Posts: 79 Rep Power: 14	So its safe to say the aem smart coils are junk? What about ls1 or yukon coils? __________________ 500hp AEM EMS RotaryAutomotive street ported Aviation sealed 13b-rew 20B 20BEEST FD 23A 4 rotor Long gone 72 rx3 drag machine Last edited by silverfdturbo6port; 04-12-2015 at 09:44 PM..

04-12-2015, 10:30 PM	#265
silverfdturbo6port 500hp club Join Date: Feb 2011 Location: spokane iTrader: (0) Posts: 79 Rep Power: 14	Yes thank you. __________________ 500hp AEM EMS RotaryAutomotive street ported Aviation sealed 13b-rew 20B 20BEEST FD 23A 4 rotor Long gone 72 rx3 drag machine

04-13-2015, 03:31 AM	#268
C. Ludwig Rotary Masochist Join Date: May 2008 Location: Floyds Knobs, IN iTrader: (5) Posts: 494 Rep Power: 17	Why two Drag 2 boxes and not a single Drag 4R? __________________ _______________________________________________ *One stop Haltech, AEM, Syvecs shopping. Installation and tuning.* http://www.lms-efi.com *Free support. Drop us an email.* chris@lms-efi.com 502-515-7482 Facebook @LMS-EFI

04-28-2015, 09:22 AM	#270
RICE RACING Don Mega Join Date: Dec 2008 Location: Utopia iTrader: (0) Posts: 1,688 Rep Power: 17	Latest batch of COP adaptors will be finished next week ready to send out. Will email those that have ordered them then. __________________ www.riceracing.com.au Worlds best Apex Seals Coil on Plug Water Injection ECU Calibration