RXtacy's slooow build up

RXtacy · 12-15-2015, 11:03 PM

Got my coils in and finished the coil bracket that was started a LONG time ago.

Didn't have the right length spacers, but you get the idea.

speedjunkie · 12-16-2015, 02:41 AM

Nice bracket! I made one for the stock location too but they sit closer to the edge of the engine and yours is finished better lol.

RXtacy · 12-16-2015, 09:41 AM

Quote:

Originally Posted by speedjunkie

Nice bracket! I made one for the stock location too but they sit closer to the edge of the engine and yours is finished better lol.

Thanks, finally getting a belt sander has dramatically improved the finish quality

Are you using the IGN-1A also? They're not small coils. It was really damn tight under there between the UIM and the fuel lines.

***TitaniumTT*** · 12-16-2015, 01:23 PM

Good lord man, didn't I cut that out almost a year ago?

Just as an afterthought for the REW mani, I integrated an UIM support for my RE

RXtacy · 12-16-2015, 01:35 PM

Quote:

Originally Posted by TitaniumTT

Good lord man, didn't I cut that out almost a year ago?

Just as an afterthought for the REW mani, I integrated an UIM support for my RE

Maybe...

I didn't have the coils to test fit everything, so I didn't weld it up. It wasn't high on the priority list. You tied the UIM into your coil bracket?

***TitaniumTT*** · 12-16-2015, 08:24 PM

Yeah.... not high on the priority list for sure.

Yes, Yes I did tie it into the UIM

speedjunkie · 12-18-2015, 02:15 AM

Quote:

Originally Posted by RXtacy

Thanks, finally getting a belt sander has dramatically improved the finish quality

Are you using the IGN-1A also? They're not small coils. It was really damn tight under there between the UIM and the fuel lines.

I didn't sand or coat mine or anything lol. It looks pretty rough. Yeah I'm using those coils too. I had to remove the coolant outlet nipple on the bottom of the throttle body to get it to almost sit on top of the coils (it's that tight), but I wanted short plug wires and that's what I got lol. I just need to figure out a way to duct cool air to them or wrap them in reflective barrier. I'll see if I can find a pic so you can see how they sit. Although it doesn't really matter since you did yours already lol and I'm not trying to hijack.

EDIT: Here we go.

RXtacy · 12-18-2015, 10:32 AM

Quote:

Originally Posted by speedjunkie

I didn't sand or coat mine or anything lol. It looks pretty rough. Yeah I'm using those coils too. I had to remove the coolant outlet nipple on the bottom of the throttle body to get it to almost sit on top of the coils (it's that tight), but I wanted short plug wires and that's what I got lol. I just need to figure out a way to duct cool air to them or wrap them in reflective barrier. I'll see if I can find a pic so you can see how they sit. Although it doesn't really matter since you did yours already lol and I'm not trying to hijack.

EDIT: Here we go.

Looks good to me

I like how far over you got them. Would have made my fuel line routing easier. Mine are quite close to the UIM as they sit.

***TitaniumTT*** · 12-18-2015, 02:13 PM

Eric, don't wrap them in anything, you'll contain more heat than you reflect

speedjunkie · 12-18-2015, 11:57 PM

Quote:

Originally Posted by RXtacy

Looks good to me

I like how far over you got them. Would have made my fuel line routing easier. Mine are quite close to the UIM as they sit.

That was another concern I had, not having enough room for the wiring harness or whatever else would be a headache. But with yours it looks like you'll still have enough room for everything and it doesn't look like you had to modify too much to get it that way. It looks good!

I didn't realize how big these coils were and how much of a PITA it would be to make them fit there lol.

Quote:

Originally Posted by TitaniumTT

Eric, don't wrap them in anything, you'll contain more heat than you reflect

OK I'll just see if I can find a way to run cool air to them then. Thanks!

RXtacy · 12-28-2015, 09:49 PM

Fabbed up a 4" downpipe. Still need to add O2 bungs.

chibikougan · 12-28-2015, 11:22 PM

High Precision Tato Cannon?

RXtacy · 12-29-2015, 08:57 AM

Quote:

Originally Posted by chibikougan

High Precision Tato Cannon?

Indeed!

***TitaniumTT*** · 12-29-2015, 10:09 AM

NIOCE! Pics installed!

RXtacy · 12-30-2015, 09:23 PM

Sure.

12-16-2015, 01:23 PM	#169
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Good lord man, didn't I cut that out almost a year ago? Just as an afterthought for the REW mani, I integrated an UIM support for my RE __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

12-16-2015, 08:24 PM	#171
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Yeah.... not high on the priority list for sure. Yes, Yes I did tie it into the UIM __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

12-18-2015, 02:13 PM	#174
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Eric, don't wrap them in anything, you'll contain more heat than you reflect __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

12-29-2015, 10:09 AM	#179
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	NIOCE! Pics installed! __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

12-16-2015, 02:41 AM	#167
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO iTrader: (1) Posts: 2,089 Rep Power: 19	Nice bracket! I made one for the stock location too but they sit closer to the edge of the engine and yours is finished better lol.