My RX7SP build up

[RICE RACING]

Here is a great series of video's on Japs and Rotaries and other inferior cars, pay particular attention to the PANSPEED as dynoed on dynapak dyno..... LOL I was making 478rwhp on 1.2kg/cm on a street port 10+ years ago with bush bearing T04S @ 1.2kg/cm on a 2nd gen T2 engine block http://www.riceracing.com.au/water-injection.htm , V's them with T04Z, bridge port and FD 13B-REW motor ...... pretty shit power band to match on the bridge port too!!! and needing race fuel to do the peak 503 rear hub HP

You will also notice the Cyber EVO doing a massive 343rwkw or 460PS on our dyno dynamics system @ haltech .......... LOL if you ever were in doubt as to how low Australia dynos read compared to exaggerator 3000 units you run in America LOL Remember ND4SPD RX2 = 448rwkw or 602 rwhp!@!!@ water injected!!!

Interesting viewing indeed!

My RICESP on 1.85kg/cm with stock std 13B-REW would easily out accelerate these "worlds best time attack powered machines" despite it weighting allot more LOL all on normal pump petrol and RR WATER INJECTION High boost runs coming to a forum near you in 2012 FACT v' FICTION LOL

http://www.youtube.com/watch?v=5DSv1EBLxxk

http://www.youtube.com/watch?v=BjDxBirtGJM

http://www.youtube.com/watch?v=sNVWSf3LOgI

http://www.youtube.com/watch?v=bkhM6EHWJGg

http://www.youtube.com/watch?v=xTAt8YmudVA

http://www.youtube.com/watch?v=vIKXDfx6MAU

http://www.youtube.com/watch?v=D3k9fSfzlXo

http://www.youtube.com/watch?v=dlJfcVg_uJk

http://www.youtube.com/watch?v=XkSTNCt7-Eg

[RICE RACING]

Anyway of enough talk of other cunts, here is some more angles of RICESP, the new rear tires look SICK! I love the way it sits. And the mega motor set up, cant stop looking at this, hard to believe something so stock looking (for a genuine SP!) makes so so much power!!! From concept to proven performer

[RICE RACING]

Originally Posted by RICE RACING

Here is an update of the durability (measured by compression) of a stock 13B-REW (from brand new) when run at sustained high power. Taken form my postings on Aquamist Water Injection site.



So a full year on and covered another 6000km (to date: all up 8200km) of testing/racing/top speed trials.
Summary: Every drive has been quite high load 90-140 testing probably around 400 or so of these tests, many 100-200kmh & 60-130mph runs (3rd to top of 4th gear) and a few top speed runs (on special test track ). Last 3000km at ~500bhp level @ 1.53kg/cm Boost level.

I did one intermediate compression test between the 1800km and this one today, but only wrote those figures down rather than taking a photo/proof. They were close to the ones today.

Rear Rotor


Front Rotor


This test was fully dry (engine run till out of fuel) and EGI disconnected, First one cant remember but I think was not as "empty" of excess fluid, this makes a high difference to rotary engine compression readings FYI.

Anyway she is not too bad, I did not think it would hold up this good especially given its a mobile test bed each and every single time it gets driven.

I have it at its new boost level of 1.7bar (around 1.75kg/cm) and it is a rocket see if she can make another year of punishment

So here is my once annual compression check up of RICESP (3rd year now! ~20,000km covered!)... This is after using the car as my daily driver for over 6 months! and also all of the higher boost settings and reconfiguration I have done over the Christmas break

Rear Rotor


Front Rotor

[Mazdabater]

Wtac machines aren't all just about power though, I have alot of respect for that cyber evo the things incredible.

[RICE RACING]

Originally Posted by Mazdabater

Wtac machines aren't all just about power though, I have alot of respect for that cyber evo the things incredible.

The only thing incredible is how a piece of shit like that in engineering terms is so well thought off LOL.

It is a full on nugget in many respects, engine wise in the majority it's a joke, honestly The turbo is a full on piece of shit in the extreme! It shows you just how fucked they are to protest a real engine like in the Sierra Sierra EVO because it was 30+kph faster down the main straight at Eastern Creek < Now power is everything

WTAC really is just a hack class for drop outs and plastic trophy racers, nobodies in the scheme of things honestly. It's far too hyped up in the extreme really..... There are hundreds of other cars in all sorts of classes that would totally wipe the floor with these pieces of shit. European Rally Cross cars 10 years ago were racing reliably with 850bhp to 950bhp from 2lt turbo 4 cylinders!!! IMHO Porsche ran the 917/30 in endurance races with 1100bhp!!! in the 1970's!!!! makes WTAC look like a chump "sport" which it is honestly
Fuck Toyota ran a 3SGTE motor at 2.1lt with single turbo in American Endurance race trim @ 950bhp! in 1992 with an Atari Game Console for an ECU! passing 4 rotor R26B powered cars like they were standing still!!!! *its all been done before to a much much higher level* BMW ran stock block 4cyl 2.1lt turbo in the same IMSA series at 900bhp! on mechanical injection! in the mid 1980's!!!! same engine they used in F1 that proven to make over 1300bhp in high boost form @ 1.5lt capacity and only 10500rpm!

I do like that back yard nothing high school drop out workshop owners and groupies can run cars though. Eventually the novelty of Time Attack will filter down and you may see some serious engineering and talent come into it. I for one wont be impressed till you see 1000+bhp 2lt turbo cars running around, then they will be where real professional were at 30 years ago IMHO

These cars should really be in the ~1300bhp and all 4WD range to be up to modern standards and technology, there is no reasons why not, except there is no real engineering "talent" there to run such cars as they are ALL in real forms of motorsports across the globe..

[FC3S Murray]

Damn that youtube vid you posted in the Fd section was amazing. That is one FAST fd3s!!!!! Now post yours dammit!

[RICE RACING]

Originally Posted by FC3S Murray

Damn that youtube vid you posted in the Fd section was amazing. That is one FAST fd3s!!!!! Now post yours dammit!

Yes it is! it btw is the only other "credible" documented RX7 to post up anything like proof of its "claimed power"... a total credit to the owner builder

In the new year I'll do up a few video's, might even get a new HD camera? and work on a few different angles to capture the immense speed of my own RICESP since I know how much all you boys love seeing real rotary street cars that are fast and reliable part of the motivation is to inspire others and also show them while at the same time debunking allot of the bullshit and mis information sprouted out by nobodies/high school drop out shop owners/self proclaimed experts on rotaries telling you that you need extra dowels, porting, C16, E85, GTXYZ123 turbo's, billet dildo's (insert any other bullshit here) to have a fast and durable car The irony of all those < is that non of these cunts have ever produced a real road car that is durable or as fast!!!! *token BS rwhp dyno sheets aside LOL*

[yzf-r1]

Beautiful car - glad I found this thread

[JhnRX7]

Rice,

How do you like the Ohlins Flag coilovers? I found a used set for sale that I am trying to get ahold of. I know they will be great for the track, but I'm curious how they are suited for street use.

[RICE RACING]

Originally Posted by JhnRX7

Rice,

How do you like the Ohlins Flag coilovers? I found a used set for sale that I am trying to get ahold of. I know they will be great for the track, but I'm curious how they are suited for street use.

My car is a street car 100%

These shocks are better than in my daily FJ Crusier they are perfect, spring rate at 14kg/cm is very nice for the road too (and you need it at this power level fwiw).

In summary EXCELLENT.

[yzf-r1]

Isn't that 14 kg/mm (780 lb/in)?

[RICE RACING]

Sorry I was thinking boost pressure units hahaha.

Yes 14kg/mm springs.

These are great on the street as the suspension never bottoms even on higher speed undualtions at high power. I ran 8kg springs before in some Tein suspension and it was crap cause as soon as you went over big undualtions at speed the suspension would bottom out.

The ride "quality" is all in the shock absorber setting, the Ohlins I have are perfect for the street when you set the bump and bound correctly.

[RICE RACING]

Here is some pics of the IC spray valve, takes fluid from the WI tank, and some pics of the beast

Love it more and more each day, performance is sick as! and it drives just beautifully, power is getting a bit silly on the street though

[RICE RACING]

Took the bad boy out today

Got it on around 28.5~28.0psi across the useful rev range, about ~1.9bar region.
As the boost is going up the peak power range creeps up, peak is not happening at around 7700rpm to 7800rpm, in 3rd gear I get well over 15psi @ 3800rpm.
The car is very quick and with the new rear tires has a high level of traction to use all of the power this boost level produces (on a decent, dry, straight road surface!@).
Was driving the other day and pulled the 2nd,3rd,4th gear to 8500rpm and a mate herd it over the mountains near where he was, and thought it was a motor bike ! crazy bit of gear it is. The acceleration and velocity you can reach on just the shortest stretches of tarmac are extraordinary indeed.

I'll leave it at this setting and enjoy it for a while before again doing the over 2 bar gauge boost long term settings, I'll leave that for our mild autumn/winter/spring period

[sa22c]

620BHP?
0-160kph over 200m? ET 7.? seconds
0-215kph over 400m? ET 11.? seconds