The RCC Official 1/4 Mile ET List, all Gens/all cars - Page 11

HDP · 10-24-2009, 08:49 PM

Quote:

Originally Posted by sk8world

I told Phil to let me moderate the drag section....

Cool, maybe you can restructure things and separate the 1/8 and 1/4 times and do away with that inaccurate 1/8 calculator...

sk8world · 10-24-2009, 11:06 PM

Well I lost today at the "king of the Streets" event but hads fun. I was up against a twin turbo chevy/Mustang and lost by .229 so it was close (him 6.7 @113). Was some fast cars there. Saw Lane in the white LS1 FD on a 2 stage NOS kit go 6.0 in the 1/8th!! Friend of mine brought his New GTR out with Cobb upgrades and went 7.3 over and over. Myself finally tried to run less boost (21 vs. 25) and the car ran the same but was easier to control, went 6.9-7.0 on every pass. I have some serious traction issues to resolve before next year as I dont believe I will go any quicker no matter how much power I make. I will post a video, sounds like I am going thru 5 gears as I am on and off the throttle...

Bryan@BNR · 11-02-2009, 10:48 PM

Put me on the list and bump some of those V8 RX7's down the list lol.

11.21 at 126.28 MPH 1.62 60 ft.

FB with SP REW/T67 at 19 psi/ET streets/E6K/Ford 8.8 rear.

jamespond24 · 11-03-2009, 12:54 AM

Quote:

Originally Posted by Bryan@BNR

Put me on the list and bump some of those V8 RX7's down the list lol.

11.21 at 126.28 MPH 1.62 60 ft.

FB with SP REW/T67 at 19 psi/ET streets/E6K/Ford 8.8 rear.

Congrats!! Now turn the boost up to 23psi and try hitting 10's. Also did you lower the tire pressure to around 8 or 9psi?

jamespond24 · 11-03-2009, 12:58 AM

I guess I post my time for my FB
9.97 137mph,13BRE,T2 tranny,BW S372,8.8rearend,microtech lt10 at 32psi,on MT ET tires.

Bryan@BNR · 11-03-2009, 10:06 AM

Quote:

Originally Posted by jamespond24

Congrats!! Now turn the boost up to 23psi and try hitting 10's. Also did you lower the tire pressure to around 8 or 9psi?

Car did okay at 12 psi tire pressure. It didnt float all around on the big end so I just kept it around 12 psi. This was my second time out with the car, still trying to get used to it. It will go tens like it sits with some 4.30 gears. I am shifting well before the 60 ft mark with the 4.88's. That was me lift shifting as well

.

jamespond24 · 11-05-2009, 11:48 PM

That was me lift shifting as well

.[/QUOTE]

Make sure you get a video next time you go to the track

Bryan@BNR · 11-08-2009, 01:51 AM

Quote:

Originally Posted by jamespond24

That was me lift shifting as well

.

Make sure you get a video next time you go to the track

[/QUOTE]

http://www.youtube.com/watch?v=cssGiUxND6k

The second pass started out well, but I had my finger on the antilag switch 3rd gear on. I bet it would have ran a 10 if I wasn't a screw up

.

P71 · 11-08-2009, 11:04 AM

UPDATES

Sorry I've been AWOL for awhile fellas. I started a new job in June and it's limited my free time for things like the intarwebz.

jbrozak: I need a timeslip or video to add your run from July.

estevan62274: I updated your FB run from August.

HDP: I updated your FD run from October.

Bryan@BNR: Added you in, thanks for the video.

jamespond24: Again, I'd love to add you in but we have to have a slip (preferred) or a video.

jamespond24 · 11-08-2009, 12:09 PM

http://videos.streetfire.net/video/I...009_708532.htm

9.97 at 137mph on this video at 7:20 mark

P71 · 11-08-2009, 09:19 PM

Quote:

Originally Posted by jamespond24

http://videos.streetfire.net/video/I...009_708532.htm

9.97 at 137mph on this video at 7:20 mark

Nice video runs! I caught a 10.0 in there as well. I added you in to everything but the 60' times because you didn't provide one. Post that up and I'll get you in there as well.

jamespond24 · 11-08-2009, 10:37 PM

Quote:

Originally Posted by P71

Nice video runs! I caught a 10.0 in there as well. I added you in to everything but the 60' times because you didn't provide one. Post that up and I'll get you in there as well.

Yeah the last run was even better all around but missed 4th gear.
60' 1.464
330' 4.152
1/8 6.341
113.36mph
1000' 8.317
1/4 9.97
137.06

Here's the last run missing 4th gear

60' 1.469
330' 4.130
1/8 6.281
114.12mph
1000' 8.490
1/4 10.642
104.24 mph

P71 · 11-09-2009, 01:00 AM

Updated your 60'. Thanks!

jamespond24 · 11-10-2009, 12:54 AM

My car is an 85 gsl-se

antman0408 · 11-29-2009, 08:09 PM

I got a new best this weekend, not much faster but still is better. I was .10sec slower in the 60', but still got a better time. I was also able to hit 108mph a couple times, highest before was about 107.5mph. As you can see, there is a lot of room for improvement, I'm still learning how to launch this car. I was #10 on the right

10-24-2009, 11:06 PM	#152
sk8world 600rwhp club member. Join Date: Mar 2008 Posts: 551 Rep Power: 18	Well I lost today at the "king of the Streets" event but hads fun. I was up against a twin turbo chevy/Mustang and lost by .229 so it was close (him 6.7 @113). Was some fast cars there. Saw Lane in the white LS1 FD on a 2 stage NOS kit go 6.0 in the 1/8th!! Friend of mine brought his New GTR out with Cobb upgrades and went 7.3 over and over. Myself finally tried to run less boost (21 vs. 25) and the car ran the same but was easier to control, went 6.9-7.0 on every pass. I have some serious traction issues to resolve before next year as I dont believe I will go any quicker no matter how much power I make. I will post a video, sounds like I am going thru 5 gears as I am on and off the throttle... __________________ 6.? @ 11? drag pass http://www.youtube.com/watch?v=9wfxT2RMr7c

11-08-2009, 11:04 AM	#159
P71 RCC Contributor Join Date: Feb 2008 Location: WA State Posts: 651 Rep Power: 18	UPDATES Sorry I've been AWOL for awhile fellas. I started a new job in June and it's limited my free time for things like the intarwebz. jbrozak: I need a timeslip or video to add your run from July. estevan62274: I updated your FB run from August. HDP: I updated your FD run from October. Bryan@BNR: Added you in, thanks for the video. jamespond24: Again, I'd love to add you in but we have to have a slip (preferred) or a video. __________________ Michael Pinto 2008 PDXCGP Drag Racing Season Champion 83 RX-7 GSL; 12A/5-Speed, Red/Red; 100% Stock - 16.072@83.39 01 CV Police Interceptor; 4.6 SOHC V8/4R70W, Dk Blue/Grey; K&N FIPK/RP Oil/Optima/Superchips/Flowmaster 40's/2.5" cat-back - 14.854@92.37 Read my Rx-7 Build Thread! http://rotarycarclub.com/rotary_foru...ed=1#post70955 Get on the new RCC 1/4 Mile ET List! http://www.rotarycarclub.com/rotary_...read.php?t=368 Vote for the ROTM! http://rotarycarclub.com/rotary_foru...play.php?f=125

11-09-2009, 01:00 AM	#163
P71 RCC Contributor Join Date: Feb 2008 Location: WA State Posts: 651 Rep Power: 18	Updated your 60'. Thanks! __________________ Michael Pinto 2008 PDXCGP Drag Racing Season Champion 83 RX-7 GSL; 12A/5-Speed, Red/Red; 100% Stock - 16.072@83.39 01 CV Police Interceptor; 4.6 SOHC V8/4R70W, Dk Blue/Grey; K&N FIPK/RP Oil/Optima/Superchips/Flowmaster 40's/2.5" cat-back - 14.854@92.37 Read my Rx-7 Build Thread! http://rotarycarclub.com/rotary_foru...ed=1#post70955 Get on the new RCC 1/4 Mile ET List! http://www.rotarycarclub.com/rotary_...read.php?t=368 Vote for the ROTM! http://rotarycarclub.com/rotary_foru...play.php?f=125

11-02-2009, 10:48 PM	#153
Bryan@BNR Rotary Fanatic Join Date: Feb 2008 Posts: 302 Rep Power: 18	Put me on the list and bump some of those V8 RX7's down the list lol. 11.21 at 126.28 MPH 1.62 60 ft. FB with SP REW/T67 at 19 psi/ET streets/E6K/Ford 8.8 rear.

11-03-2009, 12:58 AM	#155
jamespond24 Rotary Fanatic Join Date: Feb 2008 Posts: 157 Rep Power: 18	I guess I post my time for my FB 9.97 137mph,13BRE,T2 tranny,BW S372,8.8rearend,microtech lt10 at 32psi,on MT ET tires.

11-05-2009, 11:48 PM	#157
jamespond24 Rotary Fanatic Join Date: Feb 2008 Posts: 157 Rep Power: 18	That was me lift shifting as well .[/QUOTE] Make sure you get a video next time you go to the track

11-08-2009, 12:09 PM	#160
jamespond24 Rotary Fanatic Join Date: Feb 2008 Posts: 157 Rep Power: 18	http://videos.streetfire.net/video/I...009_708532.htm 9.97 at 137mph on this video at 7:20 mark

11-10-2009, 12:54 AM	#164
jamespond24 Rotary Fanatic Join Date: Feb 2008 Posts: 157 Rep Power: 18	My car is an 85 gsl-se