FS: AutoExe F/R strut bars and underbrace kit chattanooga,tn

fikren · 08-22-2009, 01:51 PM

SOLD

Selling the AutoExe front and rear strut bars and under body member brace set as a package. $950 local pickup throw on another $25 for ups shipped and insured.

Whole set was used for ~8k miles. All parts are included (bolts and backing plates), I do not have the instructions anymore but the underbody braces are pretty straight forward with the only odd piece being a black bracket but should be pretty easily figured out once your lined up. As far as the F/R strut bars, I have a full writeup with pictures on the install for them and trust me, compared to Autoexe's instructions (all japaneese) my writeup is going to be much easier to follow.

No cracks in any of the welds, everthing is in top notch condition only flaw in the whole set is a couple of the underbody pieces have chips in the powdercoat which is to be expected since its under the car and exposed to any rocks, road debris, etc.

Brand new everything would run 1600 or better so 950 is a hell of a deal for the full package.

Couple of pictures showing the powder coating chips. The steel itself has no dents, cracks, or flaws just the powder coating on the front facing areas.

Thanks,
Jonathan

fikren · 08-22-2009, 06:14 PM

pictures are up, pm with any questions.
Thanks,
Jonathan

08-22-2009, 01:51 PM	#1
fikren Rotary Fanatic Join Date: Feb 2008 Location: Chattanooga, TN iTrader: (7) Posts: 318 Rep Power: 17	FS: AutoExe F/R strut bars and underbrace kit chattanooga,tn-SOLD SOLD Selling the AutoExe front and rear strut bars and under body member brace set as a package. $950 local pickup throw on another $25 for ups shipped and insured. Whole set was used for ~8k miles. All parts are included (bolts and backing plates), I do not have the instructions anymore but the underbody braces are pretty straight forward with the only odd piece being a black bracket but should be pretty easily figured out once your lined up. As far as the F/R strut bars, I have a full writeup with pictures on the install for them and trust me, compared to Autoexe's instructions (all japaneese) my writeup is going to be much easier to follow. No cracks in any of the welds, everthing is in top notch condition only flaw in the whole set is a couple of the underbody pieces have chips in the powdercoat which is to be expected since its under the car and exposed to any rocks, road debris, etc. Brand new everything would run 1600 or better so 950 is a hell of a deal for the full package. Couple of pictures showing the powder coating chips. The steel itself has no dents, cracks, or flaws just the powder coating on the front facing areas. Thanks, Jonathan __________________ 93 bb rx7 Destined to be the never ending project car or possible part source for the rotary rat rod 2008 40th Anniversary Edition RX-8 - bankruptcy owned me RE-Amemiya Super Dolphin Tail Exhaust-for sale AutoExe Front and Rear Strut Bars-for sale AutoExe Member Brace Set-for sale 2008 Honda CBR600RR - bankruptcy owned me Motivation axle/fork/barend/frame sliders ASV "unbreakable" shorty levers Tripage Integrated Tailight and Adj FE Proton Fushmounts Akrapovic Hex Carbon/TI Slip On Sato Rearsets Last edited by fikren; 10-24-2009 at 09:13 PM.. Reason: added pictures

08-22-2009, 06:14 PM	#2
fikren Rotary Fanatic Join Date: Feb 2008 Location: Chattanooga, TN iTrader: (7) Posts: 318 Rep Power: 17	pictures are up, pm with any questions. Thanks, Jonathan __________________ 93 bb rx7 Destined to be the never ending project car or possible part source for the rotary rat rod 2008 40th Anniversary Edition RX-8 - bankruptcy owned me RE-Amemiya Super Dolphin Tail Exhaust-for sale AutoExe Front and Rear Strut Bars-for sale AutoExe Member Brace Set-for sale 2008 Honda CBR600RR - bankruptcy owned me Motivation axle/fork/barend/frame sliders ASV "unbreakable" shorty levers Tripage Integrated Tailight and Adj FE Proton Fushmounts Akrapovic Hex Carbon/TI Slip On Sato Rearsets