Polishing question

Project10AE · 07-14-2009, 04:45 PM

it should all be a smooth matte finish on its own before you even have to polish. all those spots where you see dark spots (that arent a shadow) are where it isn't evenly sanded.

I'd start around 800grit and sand until you have a uniform finish... then go up from there. when i get over 1000 i usually just skip 1500 and all that and just wetsand it with 1000+ until it is all uniform. Its not so much about the 'polishing' as it is about the 'smoothing'...

07-14-2009, 04:45 PM	#1
Project10AE Rotary Fan in Training Join Date: Apr 2009 Location: Upstate SC Posts: 42 Rep Power: 0	it should all be a smooth matte finish on its own before you even have to polish. all those spots where you see dark spots (that arent a shadow) are where it isn't evenly sanded. I'd start around 800grit and sand until you have a uniform finish... then go up from there. when i get over 1000 i usually just skip 1500 and all that and just wetsand it with 1000+ until it is all uniform. Its not so much about the 'polishing' as it is about the 'smoothing'...