6 sec world faster 2 rotor from puerto rico

el canito rotary · 12-20-2008, 06:40 PM

new world record http://www.youtube.com/watch?v=mTj5E...eature=related

sk8world · 12-21-2008, 04:44 PM

no doubt a bad ass car but this is my favorite clip I have scene in awhile....

http://au.youtube.com/watch?v=urh11C...eature=channel

TheDriver216 · 12-21-2008, 08:00 PM

Stats for the car

980whp 550wtq

Tim McAmis built full chassis with 104" wheelbase

front Strange double adjustable dampers with Hypercoil springs

Koni double adjustable rears

GooodYear 32x14.5x15 tires on Weld Racing Aluma Star Wheels

10,500 rpm

Extreme Rotaries center bearing billet eccentric shaft and engine balance

Extreme Rotaries stud kit

'88 8.5:1 rotors

'86 corner seals

2mm Australian apex seals <<<<just quoting what the magazine says

'94 Semi PP rotor housings by Gaby Skern, engine built in PR by him

Mike Turbo custom 88mm turbo with 5" down pipe

40psi controlled by Turbo Smart eboost-2

Gaby Skern custom turbo mani and billet aluminum intake mani built by Limon Machine Shop

Accufab 80mm throttle

Rons Fuel mechanical fuel fump (methanol)

3 Wilson Manifold fuel rails with a total of 12 1600cc injectors

'89 Cosmo ignition system with 2 MSD DIS-4 and 4 MSD Blaster DIS coils

Microtech LT12S X6 tuned by Gaby Skern

Jerico air shifted 5sp tranny with Gaby Skern specified and non-disclosed gear ratios

McLeod Clutch and Flywheel with Trick Titanium safety shield

Ford Mark Williams differential with "40 gun drill" shafts (whatever that means)

Best time:
1.07 sec 60'
4.50 sec 1/8 mile @ 165mph
6.97 sec 1/4 mile @ 197.7mph

JShiz · 01-15-2009, 01:36 PM

I <3 that car

P71 · 01-15-2009, 02:08 PM

Awesome!

Hello Roto · 01-29-2009, 04:12 PM

N.RotaryTech · 02-04-2009, 06:51 PM

Quote:

Originally Posted by sk8world

no doubt a bad ass car but this is my favorite clip I have scene in awhile....

http://au.youtube.com/watch?v=urh11C...eature=channel

Im I right when I say that the front wheels were in the air all the way down the track?

Sick, Awesome, Badass.

The 3rd gen was cool too. lol.

prrex4ever · 02-04-2009, 07:30 PM

That RX-3 is just plain WICKED!

sk8world · 02-19-2009, 01:50 PM

Yeah, wheels up the complete pass. I would have shit my pants....

neit_jnf · 02-19-2009, 08:13 PM

Hey! I wrote this translation from a local PR magazine!!! Took me a while! Thief! LOL j/k

Turns out it's using 3mm NRS ceramic seals, the mag was mistaken there.

Quote:

Originally Posted by TheDriver216

Stats for the car

980whp 550wtq

Tim McAmis built full chassis with 104" wheelbase

front Strange double adjustable dampers with Hypercoil springs

Koni double adjustable rears

GooodYear 32x14.5x15 tires on Weld Racing Aluma Star Wheels

10,500 rpm

Extreme Rotaries center bearing billet eccentric shaft and engine balance

Extreme Rotaries stud kit

'88 8.5:1 rotors

'86 corner seals

2mm Australian apex seals <<<<just quoting what the magazine says

'94 Semi PP rotor housings by Gaby Skern, engine built in PR by him

Mike Turbo custom 88mm turbo with 5" down pipe

40psi controlled by Turbo Smart eboost-2

Gaby Skern custom turbo mani and billet aluminum intake mani built by Limon Machine Shop

Accufab 80mm throttle

Rons Fuel mechanical fuel fump (methanol)

3 Wilson Manifold fuel rails with a total of 12 1600cc injectors

'89 Cosmo ignition system with 2 MSD DIS-4 and 4 MSD Blaster DIS coils

Microtech LT12S X6 tuned by Gaby Skern

Jerico air shifted 5sp tranny with Gaby Skern specified and non-disclosed gear ratios

McLeod Clutch and Flywheel with Trick Titanium safety shield

Ford Mark Williams differential with "40 gun drill" shafts (whatever that means)

Best time:
1.07 sec 60'
4.50 sec 1/8 mile @ 165mph
6.97 sec 1/4 mile @ 197.7mph

13bpower · 03-03-2009, 05:34 PM

That's what up,that's what we nigges do in the pr.

glassman · 03-21-2009, 01:40 PM

Quote:

Originally Posted by neit_jnf

Turns out it's using 3mm NRS ceramic seals, the mag was mistaken there.

Yes it certainly was, they promised to print a correction. I wonder if they ever did that.

12-20-2008, 06:40 PM	#1
el canito rotary Rotary Fanatic Join Date: Nov 2008 iTrader: (2) Posts: 351 Rep Power: 16	6 sec world faster 2 rotor from puerto rico new world record http://www.youtube.com/watch?v=mTj5E...eature=related

01-15-2009, 02:08 PM	#5
P71 RCC Contributor Join Date: Feb 2008 Location: WA State iTrader: (1) Posts: 651 Rep Power: 17	Awesome! __________________ Michael Pinto 2008 PDXCGP Drag Racing Season Champion 83 RX-7 GSL; 12A/5-Speed, Red/Red; 100% Stock - 16.072@83.39 01 CV Police Interceptor; 4.6 SOHC V8/4R70W, Dk Blue/Grey; K&N FIPK/RP Oil/Optima/Superchips/Flowmaster 40's/2.5" cat-back - 14.854@92.37 Read my Rx-7 Build Thread! http://rotarycarclub.com/rotary_foru...ed=1#post70955 Get on the new RCC 1/4 Mile ET List! http://www.rotarycarclub.com/rotary_...read.php?t=368 Vote for the ROTM! http://rotarycarclub.com/rotary_foru...play.php?f=125

01-29-2009, 04:12 PM	#6
Hello Roto El Mas Tiguere..DR Join Date: Jan 2009 Location: Big Red Country iTrader: (0) Posts: 21 Rep Power: 0	__________________ DD: 91' Slow EF'in Hatchback Project: 87' TII Rebuild (Build Thread Pending)

12-21-2008, 04:44 PM	#2
sk8world 600rwhp club member. Join Date: Mar 2008 iTrader: (2) Posts: 551 Rep Power: 17	no doubt a bad ass car but this is my favorite clip I have scene in awhile.... http://au.youtube.com/watch?v=urh11C...eature=channel

12-21-2008, 08:00 PM	#3
TheDriver216 Rotary Fanatic Join Date: Feb 2008 Location: Cleveland, Ohio iTrader: (1) Posts: 159 Rep Power: 17	Stats for the car 980whp 550wtq Tim McAmis built full chassis with 104" wheelbase front Strange double adjustable dampers with Hypercoil springs Koni double adjustable rears GooodYear 32x14.5x15 tires on Weld Racing Aluma Star Wheels 10,500 rpm Extreme Rotaries center bearing billet eccentric shaft and engine balance Extreme Rotaries stud kit '88 8.5:1 rotors '86 corner seals 2mm Australian apex seals <<<<just quoting what the magazine says '94 Semi PP rotor housings by Gaby Skern, engine built in PR by him Mike Turbo custom 88mm turbo with 5" down pipe 40psi controlled by Turbo Smart eboost-2 Gaby Skern custom turbo mani and billet aluminum intake mani built by Limon Machine Shop Accufab 80mm throttle Rons Fuel mechanical fuel fump (methanol) 3 Wilson Manifold fuel rails with a total of 12 1600cc injectors '89 Cosmo ignition system with 2 MSD DIS-4 and 4 MSD Blaster DIS coils Microtech LT12S X6 tuned by Gaby Skern Jerico air shifted 5sp tranny with Gaby Skern specified and non-disclosed gear ratios McLeod Clutch and Flywheel with Trick Titanium safety shield Ford Mark Williams differential with "40 gun drill" shafts (whatever that means) Best time: 1.07 sec 60' 4.50 sec 1/8 mile @ 165mph 6.97 sec 1/4 mile @ 197.7mph

01-15-2009, 01:36 PM	#4
JShiz ZOMG WTF BBQ!!! Join Date: Mar 2008 Location: Mobile, Al iTrader: (0) Posts: 280 Rep Power: 17	I <3 that car

02-04-2009, 07:30 PM	#8
prrex4ever Rotary Fanatic Join Date: Oct 2008 iTrader: (1) Posts: 274 Rep Power: 17	That RX-3 is just plain WICKED!

02-19-2009, 01:50 PM	#9
sk8world 600rwhp club member. Join Date: Mar 2008 iTrader: (2) Posts: 551 Rep Power: 17	Yeah, wheels up the complete pass. I would have shit my pants....

03-03-2009, 05:34 PM	#11
13bpower Rotary Fan in Training Join Date: May 2008 Location: New hope mn iTrader: (0) Posts: 57 Rep Power: 17	That's what up,that's what we nigges do in the pr.