BNR's 1st gen REW powered Dyno vids

Bryan@BNR · 03-03-2008, 04:42 PM

This is my 1g RX7 in the process of building. Doing a 8.8 swap which probably won't be done for Deals Gap in April, but I will have it done sometime this year.

84 GS converted to 5 speed

Race ported REW with all OEM seals/springs
T2/FB hybrid transmission which is bolt up with no cutting on the car
62-1 TO4B turbocharger .85 a/r Comp-1.00 a/r turbine housing
HKS T04 Cast divided manifold
HKS Racing wastegate
3.5" down pipe and full stainless 3" exhaust with 2 magnaflow mufflers
NPR large intercooler
3" intercooler pipes with China Tial blow off valve
Haltech E6K engine management (tuned by Steve Kan)
550-1600 staged injectors
300ZX fuel pump intank with custom lid for tank
Adjustable FP regulator
Custom BeCool Radiator with siocco cooling fans/shroud
DYNOed 440.2 RWHP/ 356 RWTQ at 20 psi of boost outside temps were around 100F on the dyno

http://www.youtube.com/watch?v=fcMZJn8jKfQ
http://www.youtube.com/watch?v=Ja2Wh...eature=related

Future plans for the car is:

Snow Performance stage 2 methenol injection kit
T67 T4 with tubular stainless manifold
and most important A/C

85rx-7gsl-se · 03-03-2008, 04:56 PM

How high did you rev that thing?

Bryan@BNR · 03-03-2008, 11:53 PM

Quote:

Originally Posted by 85rx-7gsl-se

How high did you rev that thing?

The first vid it was about 7600 RPM the second one was 8-8300 RPM. Limiter is set up at 8300.

85rx-7gsl-se · 03-03-2008, 11:56 PM

Thanks. I just say the tach disappear so I couldn't tell. BTW, sounds great and can't wait to see it. Planning on running it at SpeedForSale 08?

Bryan@BNR · 03-04-2008, 12:44 AM

I just want to start driving it to be honest with ya. I am trying to eliminate all the weak links of the car so I can put down 450-520 RWHP and the car be somewhat reliable. I think 450 RWHP is about the limit for reliabilty with a REW motor properly tuned. You can make more but there is more upkeep changing plugs more frequent, running race fuel. I will run the car for a while with the 62-1.

orion84gsl · 12-26-2008, 09:51 PM

Try methanol injection. lots of gains to be had, or just run it for the sake of cooler a/f mixtures, and less chance of detonation.

staticpat · 12-26-2008, 11:25 PM

Quote:

Originally Posted by Bryan@BNR

T2/FB hybrid transmission which is bolt up with no cutting on the car

Maybe I should have paid more attention to this. I have a large hole in my floorboard.

85rx-7gsl-se · 12-27-2008, 01:50 AM

Quote:

Originally Posted by staticpat

Maybe I should have paid more attention to this. I have a large hole in my floorboard.

x2 lol

rx7 FC TII · 12-27-2008, 03:09 AM

haha pat ya you might want to look more into that.

sk8world · 12-28-2008, 12:51 AM

Brian, I just saw this for the first time! Very nice... I bet it will be very fast with that amount of power and weight!

Whizbang · 12-29-2008, 10:50 AM

dang

Nutsid · 02-16-2009, 10:28 PM

Awesome car. I love it.

Bryan@BNR · 03-04-2009, 10:31 AM

thanks guys. I did the 8.8 swap and now minus a few things. I have to flare out the rear a bit to clearance for the 255 drag radials. I also completed the methenol injection kit. The only thing left is the T67 set up and it will be ready to make 500.

The transmission took some time to do. Setzep from the other forum did this as well. The 2 tail housings are interchangable. You have to shorten the linkage tube and weld it to the correct length. Also after the tail housing goes on, A custom trans mounting bracket has to be made. It is involving, but worth not hacking up a car.

Bryan

sk8world · 03-04-2009, 01:10 PM

Nice Brian.. I have been wanting to do an auto set up with a transbrake-big 6800 stall. Maybe a solid rear too. I know of one guy that did the th400 tranny but had bad issues and the gearing was way off. Top speed was 130mph....

Bryan@BNR · 03-05-2009, 11:10 AM

The Turbo400 is a 3 speed. You will have to run some lower gears or way taller tires to get any mph out of it. Plus some Torque! Anyway, you will give up all your streetability with the ultra High stall speeds. The bands always slipping will cause trans fluid temps to get really hot. Then you screw up stuff. You need a good gear box. Possibly a 4+1 doug nash or a Richmond 5 speed. They would be your cheapest options. Other than that the Dog box is also an expensive option.

Do a T2 rear chunk and some chromoly axels in the rear and you should be fine with the IRS. Go until you break it I guess

.

03-03-2008, 04:42 PM	#1
Bryan@BNR Rotary Fanatic Join Date: Feb 2008 iTrader: (2) Posts: 302 Rep Power: 17	BNR's 1st gen REW powered Dyno vids This is my 1g RX7 in the process of building. Doing a 8.8 swap which probably won't be done for Deals Gap in April, but I will have it done sometime this year. 84 GS converted to 5 speed Race ported REW with all OEM seals/springs T2/FB hybrid transmission which is bolt up with no cutting on the car 62-1 TO4B turbocharger .85 a/r Comp-1.00 a/r turbine housing HKS T04 Cast divided manifold HKS Racing wastegate 3.5" down pipe and full stainless 3" exhaust with 2 magnaflow mufflers NPR large intercooler 3" intercooler pipes with China Tial blow off valve Haltech E6K engine management (tuned by Steve Kan) 550-1600 staged injectors 300ZX fuel pump intank with custom lid for tank Adjustable FP regulator Custom BeCool Radiator with siocco cooling fans/shroud DYNOed 440.2 RWHP/ 356 RWTQ at 20 psi of boost outside temps were around 100F on the dyno http://www.youtube.com/watch?v=fcMZJn8jKfQ http://www.youtube.com/watch?v=Ja2Wh...eature=related Future plans for the car is: Snow Performance stage 2 methenol injection kit T67 T4 with tubular stainless manifold and most important A/C Last edited by Bryan@BNR; 03-03-2008 at 04:45 PM..

12-29-2008, 10:50 AM	#11
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp iTrader: (5) Posts: 3,190 Rep Power: 20	dang __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

03-04-2009, 01:10 PM	#14
sk8world 600rwhp club member. Join Date: Mar 2008 iTrader: (2) Posts: 551 Rep Power: 17	Nice Brian.. I have been wanting to do an auto set up with a transbrake-big 6800 stall. Maybe a solid rear too. I know of one guy that did the th400 tranny but had bad issues and the gearing was way off. Top speed was 130mph.... __________________ 6.? @ 11? drag pass http://www.youtube.com/watch?v=9wfxT2RMr7c

03-04-2008, 12:44 AM	#5
Bryan@BNR Rotary Fanatic Join Date: Feb 2008 iTrader: (2) Posts: 302 Rep Power: 17	I just want to start driving it to be honest with ya. I am trying to eliminate all the weak links of the car so I can put down 450-520 RWHP and the car be somewhat reliable. I think 450 RWHP is about the limit for reliabilty with a REW motor properly tuned. You can make more but there is more upkeep changing plugs more frequent, running race fuel. I will run the car for a while with the 62-1.

12-26-2008, 09:51 PM	#6
orion84gsl Rotary Fanatic Join Date: Mar 2008 iTrader: (0) Posts: 167 Rep Power: 17	Try methanol injection. lots of gains to be had, or just run it for the sake of cooler a/f mixtures, and less chance of detonation.

12-27-2008, 03:09 AM	#9
rx7 FC TII Rotary Fanatic Join Date: Feb 2008 Location: hoover iTrader: (0) Posts: 161 Rep Power: 17	haha pat ya you might want to look more into that.

12-28-2008, 12:51 AM	#10
sk8world 600rwhp club member. Join Date: Mar 2008 iTrader: (2) Posts: 551 Rep Power: 17	Brian, I just saw this for the first time! Very nice... I bet it will be very fast with that amount of power and weight!

03-04-2009, 10:31 AM	#13
Bryan@BNR Rotary Fanatic Join Date: Feb 2008 iTrader: (2) Posts: 302 Rep Power: 17	thanks guys. I did the 8.8 swap and now minus a few things. I have to flare out the rear a bit to clearance for the 255 drag radials. I also completed the methenol injection kit. The only thing left is the T67 set up and it will be ready to make 500. The transmission took some time to do. Setzep from the other forum did this as well. The 2 tail housings are interchangable. You have to shorten the linkage tube and weld it to the correct length. Also after the tail housing goes on, A custom trans mounting bracket has to be made. It is involving, but worth not hacking up a car. Bryan

03-05-2009, 11:10 AM	#15
Bryan@BNR Rotary Fanatic Join Date: Feb 2008 iTrader: (2) Posts: 302 Rep Power: 17	The Turbo400 is a 3 speed. You will have to run some lower gears or way taller tires to get any mph out of it. Plus some Torque! Anyway, you will give up all your streetability with the ultra High stall speeds. The bands always slipping will cause trans fluid temps to get really hot. Then you screw up stuff. You need a good gear box. Possibly a 4+1 doug nash or a Richmond 5 speed. They would be your cheapest options. Other than that the Dog box is also an expensive option. Do a T2 rear chunk and some chromoly axels in the rear and you should be fine with the IRS. Go until you break it I guess .