AZRR CYM FD Build Coming Together

[GorillaRE]

Originally Posted by RCCAZ 1

Here's a sketch of what I'm envisioning. Tank will use the stock windshield washer fill hole on the rear panel.

I would place a "baffle wall" with 1/8" holes near the bottom, around the pump supply line on the drivers side tank. Splitting the tank into two tanks was good idea and WILL assist in the "slosh" effect. None the less, I would recommend you add the baffling.

-J

[RCCAZ 1]

Originally Posted by GorillaRE

I would place a "baffle wall" with 1/8" holes near the bottom, around the pump supply line on the drivers side tank. Splitting the tank into two tanks was good idea and WILL assist in the "slosh" effect. None the less, I would recommend you add the baffling.

-J

Agreed. Baffles are part of the plan. I'll keep posting up pics as the tank takes shape!

[REVIT93RX7]

Who was the maker of your rear diffuser. Great build by the way.

[RX-7FD3S]

awesome exhaust

[general7]

Nice car!

[speedjunkie]

That tank is MONEY! I love it. I tried using just the stock tank...not NEAR big enough lol. But even the one tank on that side looks way bigger.

[RCCAZ 1]

Originally Posted by speedjunkie

That tank is MONEY! I love it. I tried using just the stock tank...not NEAR big enough lol. But even the one tank on that side looks way bigger.

Thanks! Yea, the two tanks combined hold ~1.8 gals. More than enough for an aggressive track session and probably enough for an entire day at the track. Glad you like it!

[speedjunkie]

Originally Posted by RCCAZ 1

Thanks! Yea, the two tanks combined hold ~1.8 gals. More than enough for an aggressive track session and probably enough for an entire day at the track. Glad you like it!

Hell yeah, that should be well more than enough lol. I'm using the stock front tank now and I think it's like 3/4 gallon or something and it lasts me quite a while. You'll be just fine lol.

I love your whole car, so I'm not surprised that I'd like the tank lol.

[RCCAZ 1]

Wow, hard to believe it's been a year since I last posted up to this thread. Well, I've added a few goodies this year. I'll post up a few pics in the next day or so. Happy Thanksgiving everyone!

First off is my decision to pull my turbo manifold and hot side to send off for custom Inconel heat shielding. Beautiful result and highly functional. I highly recommend the folks at Alloy Racing Covers in Anaheim. Also plumbed in a couple of EGT bungs while I had it all disassembled.





Secondly, I shaved the air pump bracket off of my front housing and nearly missed Sevenstock due to leaks... a long story, but it's fixed.





Took advantage of having Tri-Point Engineering at Sevenstock to finally order their incredible front sway bar that I've had my eyes on now for a couple of years and got her installed. The bar is SO badass!!



Finally, added a little bling to my door sills. Chrome door latches and some cool vinyl from Turbojeff. Easy to install and really cleans up the door sill.





He has plenty of sets available and ready to ship. Check him out in the new product development area on the OTHER forum

http://www.rx7club.com/group-buy-pro...lique-1049243/

[RX SE7EN]

All those pretty lines and then a quick disconnect type fitting?

I have found those leaking multiple times.

[speedjunkie]

Good grief! Talk about attention to detail LOL. Looks fantastic, as always!

[RCCAZ 1]

Originally Posted by speedjunkie

Good grief! Talk about attention to detail LOL. Looks fantastic, as always!

Thanks Speedjunkie. Yea, I'm running out of ideas, so I think the car is pretty close to completion. A few details here and there still that need to be completed, but I need to find a new project soon to occupy my mind (and time). We'll see!

Interesting note on my water tank, I filled it off earlier this month before leaving Phoenix for Sevenstock and the tank lasted until I rolled into the hotel near California Speedway. That's a five hour drive. Now granted, a lot of the trip was cruising (i.e., out of boost), but there were enough "boosted" portions on the freeway to keep a smile on your face Good indicator of capacity.

[need RX7]

I love this car. The color is great, the engine bay is great, the thousands of little OCD details are great, and it all adds up to a beautiful package. The stance and wheel fitment are just right, aggressive without looking broken like a dorifto car. Every time I see a picture of it, I reflexively right click->save as without even thinking about it .

[RCCAZ 1]

Originally Posted by need RX7

I love this car. The color is great, the engine bay is great, the thousands of little OCD details are great, and it all adds up to a beautiful package. The stance and wheel fitment are just right, aggressive without looking broken like a dorifto car. Every time I see a picture of it, I reflexively right click->save as without even thinking about it .

Wow, thanks for that compliment. It's been a 12 year labor of love building on some of the best of designs from this community and adding in my own purpose-built ideas. I've had a great time doing it. May need to look for another project soon to ad to the mix. Right now, garage space is the limiting factor. We'll see!

[RCCAZ 1]

Another new small mod. Added the IRP Master Cylinder brace