Go Back   Rotary Car Club > Tech Discussion > Rotary Tech - General Rotary Engine related tech section..

Rotary Tech - General Rotary Engine related tech section.. Tech section for general Rotary Engine... This includes, building 12As, 13Bs, 20Bs, Renesis, etc...


Welcome to Rotary Car Club.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.

Closed Thread
 
Thread Tools Display Modes
Old 03-09-2016, 03:35 PM   #16
TitaniumTT
Test Whore - Admin
 
TitaniumTT's Avatar
 
Join Date: Mar 2008
Location: Right Behind you son
iTrader: (4)
Posts: 4,581
Rep Power: 10
TitaniumTT will become famous soon enough
Default







__________________
-The Angry Stig-
DGRR 2009, 2011, 2012 & 2013 - Best FC

DEALS GAP!! WOOHOOOO!!!!!

2015 Audi S4 - Samantha - Zero Brap S4
2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter
2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins
1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle
1988 'Vert - In progress
1988 FC Coupe - Gretchen -The attention whore BEAST!


I'm a sick individual, what's wrong with you?
I'm pure Evil
I'm still insane, in the best possible way.
I think Brian's idea of romance is using lube.
Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion.
You win with your thread. Most everything
It's a truck with a steel gate on the back. Just a statement of fact

Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff....
No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon.
-Angry Motherf*cker Mode ENGAGED-
TitaniumTT is offline  
Old 03-14-2016, 02:59 PM   #17
Barry Bordes
Rotary Fanatic
 
Barry Bordes's Avatar
 
Join Date: Feb 2008
Location: Slidell, LA
iTrader: (0)
Posts: 191
Rep Power: 17
Barry Bordes is on a distinguished road
Default

Quote:
Originally Posted by RETed View Post
In a PERFECT environment, this is true...

You might find it surprising, and most of us live in reality...

Under less than ideal conditions, seals can resonate back and forth.
I.E. under pre-ignition and / or detonation

If you can guarantee that your engine will never see such conditions, then you would be right.


-Ted
Ted, I am a little surprised that you, as a moderator, would become an advocate for someone over the truth.

I was under the impression that you had disassembled many engines.....
Certainly you should have observed what is depicted below.

On the left side you see the wear from driven side seals... on the right observe that there is a ghost of wear ..... no wear whatsoever.

Barry

Barry Bordes is offline  
Old 03-14-2016, 04:00 PM   #18
Barry Bordes
Rotary Fanatic
 
Barry Bordes's Avatar
 
Join Date: Feb 2008
Location: Slidell, LA
iTrader: (0)
Posts: 191
Rep Power: 17
Barry Bordes is on a distinguished road
Default

This is for the guys building their own engines.

An engine built anywhere in the world will be capable of making approximately the same power if the builder uses good tolerances and has a close attention to detail.

This includes engines built by Jonathan, Carlos, Alex, Tom, Brian, Howard, Peter and you Ted....(if you don't see your name I can add it!)

There should be no hero worship for anyone special. Forget the hype.

Your simple practice should be...
1- make the best possible sealing points... hence the zero-clearance side seals.
2- give the apex seals a flat surface to run-on using something like my sparkplug area cooling mod.
3- Make the AFR's spot-on with help from something like my free Excel AFR Corrections Program or any other autocorrect system.
4- And probably the toughest... center the combustion peak-pressure around 45 degrees atdc. This is where most people fall short... they go for what is called a safe ignition map.

If you follow these simple ideas you will have the highest horsepower possible at what ever boost you run, even NA.
Barry Bordes is offline  
Old 03-15-2016, 10:04 AM   #19
knonfs
Rotary Fan in Training
 
Join Date: Mar 2008
iTrader: (0)
Posts: 86
Rep Power: 17
knonfs is on a distinguished road
Default

Quote:
Originally Posted by Barry Bordes View Post
This is for the guys building their own engines.

An engine built anywhere in the world will be capable of making approximately the same power if the builder uses good tolerances and has a close attention to detail.

This includes engines built by Jonathan, Carlos, Alex, Tom, Brian, Howard, Peter and you Ted....(if you don't see your name I can add it!)

There should be no hero worship for anyone special. Forget the hype.

Your simple practice should be...
1- make the best possible sealing points... hence the zero-clearance side seals.
2- give the apex seals a flat surface to run-on using something like my sparkplug area cooling mod.
3- Make the AFR's spot-on with help from something like my free Excel AFR Corrections Program or any other autocorrect system.
4- And probably the toughest... center the combustion peak-pressure around 45 degrees atdc. This is where most people fall short... they go for what is called a safe ignition map.

If you follow these simple ideas you will have the highest horsepower possible at what ever boost you run, even NA.
Barry, what do you mean by #3?

Make sure its not too lean/rich under boost? all parts of the map?
knonfs is offline  
Old 03-16-2016, 01:26 AM   #20
RETed
RCC Addict
 
Join Date: Mar 2008
Location: Honolulu, Hawaii USA
iTrader: (1)
Posts: 1,813
Rep Power: 18
RETed will become famous soon enough
Default

Quote:
Originally Posted by Barry Bordes View Post
Ted, I am a little surprised that you, as a moderator, would become an advocate for someone over the truth.

I was under the impression that you had disassembled many engines.....
Certainly you should have observed what is depicted below.

On the left side you see the wear from driven side seals... on the right observe that there is a ghost of wear ..... no wear whatsoever.

Barry

[URL=http://s287.photobucket.com/user/bbordes/media/EFR%20Manifold/engine%20pictures/IMG_11781_zpsbvhj0p2s.jpg.html][IMG]http://i287.photobucket.com/albums/ll129/bbordes/EFR%20Manifold/engine%20pictures/IMG_11781_zpsbvhj0p2s.jpg[IMG][URL]
Nah, I like the truth actually...

My conclusions are with discussions with someone with a Masters degree in Mechanical Engineering.

We blew up a 13B-REW with no turbo (long story) that only managed to put down 130 - 160hp at the wheels on a DynoJet.
The engine was running milled 3mm rotors with 3mm apex seals.
HOW DO YOU BLOW UP SOMETHING LIKE THAT?

The apex seals did not have chipped corners like most of your failed apex seals.
(You did tear down enough engines to observe this, right?)
The apex seals were cracked straight down the center - height-wise, of course.
I have never seen apex seal failure like this except for this one particular incident.
The mechanical engineer stated that this failure was a consistent with a harmonic oscillation failure of that type of material.

Why am I talking about apex seals when you're taking about side seals and corners seals?
You're smart enough to make that connection, right?

Oh, and just to back that up...
It's been documented by Mazda in a Mazda technical review used as reference for an SAE paper.
You're smart enough to go look that up too, right?

So, you posted a pic of just about 3 engine's worth of corner seals...
How about the other thousand you've come across in your experience?
Are you going to state that all the other thousands of corner seals look exactly like the ones in your pic?


-Ted
__________________
reted_2000@yahoo.com
Technical Advisor
FC3S Pro
http://fc3spro.com/



Quote:
Originally Posted by TitaniumTT View Post
because you're only as good as your backup
RETed is offline  
Old 03-16-2016, 01:30 AM   #21
RETed
RCC Addict
 
Join Date: Mar 2008
Location: Honolulu, Hawaii USA
iTrader: (1)
Posts: 1,813
Rep Power: 18
RETed will become famous soon enough
Default

Quote:
Originally Posted by Barry Bordes View Post
There should be no hero worship for anyone special. Forget the hype.

Your simple practice should be...
1- make the best possible sealing points... hence the zero-clearance side seals.
2- give the apex seals a flat surface to run-on using something like my sparkplug area cooling mod.
3- Make the AFR's spot-on with help from something like my free Excel AFR Corrections Program or any other autocorrect system.
4- And probably the toughest... center the combustion peak-pressure around 45 degrees atdc. This is where most people fall short... they go for what is called a safe ignition map.

If you follow these simple ideas you will have the highest horsepower possible at what ever boost you run, even NA.
Too complex...

1) Strap car on dyno
2) Adjust fuel maps
3) Adjust ignition timing maps
4) Go back to #2 and #3 until you're satified

This is how I tune my cars for highest horsepower, even NA...

Oh, here's a secret: this works for piston engines too...


-Ted
__________________
reted_2000@yahoo.com
Technical Advisor
FC3S Pro
http://fc3spro.com/



Quote:
Originally Posted by TitaniumTT View Post
because you're only as good as your backup
RETed is offline  
Old 03-16-2016, 08:08 AM   #22
TitaniumTT
Test Whore - Admin
 
TitaniumTT's Avatar
 
Join Date: Mar 2008
Location: Right Behind you son
iTrader: (4)
Posts: 4,581
Rep Power: 10
TitaniumTT will become famous soon enough
Default

Barry, could you elaborate on #4
__________________
-The Angry Stig-
DGRR 2009, 2011, 2012 & 2013 - Best FC

DEALS GAP!! WOOHOOOO!!!!!

2015 Audi S4 - Samantha - Zero Brap S4
2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter
2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins
1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle
1988 'Vert - In progress
1988 FC Coupe - Gretchen -The attention whore BEAST!


I'm a sick individual, what's wrong with you?
I'm pure Evil
I'm still insane, in the best possible way.
I think Brian's idea of romance is using lube.
Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion.
You win with your thread. Most everything
It's a truck with a steel gate on the back. Just a statement of fact

Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff....
No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon.
-Angry Motherf*cker Mode ENGAGED-
TitaniumTT is offline  
Old 03-16-2016, 12:17 PM   #23
ninesixtwo
sumdumguy
 
Join Date: Nov 2012
Location: Calgary
iTrader: (0)
Posts: 17
Rep Power: 0
ninesixtwo is on a distinguished road
Default

Aiming for a certain peak chamber pressure vs a given crank angle is fine in theory as most people don't have access to in-cylinder pressure monitoring so its kind of a moot point. In practice, OEM level calibration involves monitoring the crank angle at which 50% of the combustion charge has been consumed. The optimal point for CA50 has a 2-3 degree range for any engine, whereas peak cylinder pressure can be deemed "optimal" for a range more than twice that.
__________________
HKS T04Z Bridgeport FD3S
ninesixtwo is offline  
Old 03-19-2016, 04:18 PM   #24
Barry Bordes
Rotary Fanatic
 
Barry Bordes's Avatar
 
Join Date: Feb 2008
Location: Slidell, LA
iTrader: (0)
Posts: 191
Rep Power: 17
Barry Bordes is on a distinguished road
Default

Quote:
Originally Posted by knonfs View Post
Barry, what do you mean by #3?

Make sure its not too lean/rich under boost? all parts of the map?

knonfs,
This is what the Excel program looks like.
send me a PM and with your email and I can send you a copy.
Most people don't understand the importance of an ideal mixture and it's to improvement to the burn rate.




Then on the second folder you take your corrected base map and check it any anomalies.
Barry



Last edited by Barry Bordes; 03-19-2016 at 08:41 PM..
Barry Bordes is offline  
Old 03-19-2016, 05:27 PM   #25
Barry Bordes
Rotary Fanatic
 
Barry Bordes's Avatar
 
Join Date: Feb 2008
Location: Slidell, LA
iTrader: (0)
Posts: 191
Rep Power: 17
Barry Bordes is on a distinguished road
Default

Quote:
Originally Posted by RETed View Post
Nah, I like the truth actually...

My conclusions are with discussions with someone with a Masters degree in Mechanical Engineering.

We blew up a 13B-REW with no turbo (long story) that only managed to put down 130 - 160hp at the wheels on a DynoJet.
The engine was running milled 3mm rotors with 3mm apex seals.
HOW DO YOU BLOW UP SOMETHING LIKE THAT?

The apex seals did not have chipped corners like most of your failed apex seals.
(You did tear down enough engines to observe this, right?)
The apex seals were cracked straight down the center - height-wise, of course.
I have never seen apex seal failure like this except for this one particular incident.
The mechanical engineer stated that this failure was a consistent with a harmonic oscillation failure of that type of material.

Why am I talking about apex seals when you're taking about side seals and corners seals?
You're smart enough to make that connection, right?

Oh, and just to back that up...
It's been documented by Mazda in a Mazda technical review used as reference for an SAE paper.
You're smart enough to go look that up too, right?

So, you posted a pic of just about 3 engine's worth of corner seals...
How about the other thousand you've come across in your experience?
Are you going to state that all the other thousands of corner seals look exactly like the ones in your pic?


-Ted

Ted... my guess would have been that there was an interference fit in the freshly milled 3mm slots causing the seal bind when heated.
That combined with the infamous peaks caused by the hot spark plug area caused the seal to break in the center.

Maybe we could add a #5... when installing all seals make sure that there is absolutely no interference and that the seals spring freely (per the manual).

By the way Ted if you have a reference please post it! It will only help the forum.

I also noticed that you have not provided any pictures of double worn corner seals. I actually have some but they are ones that I reversed from the last rebuild.

To be fair to your thought process... I might theorize that possibly on very hard decel... like at an autox that the seals might be slung forward... but I have not seem any evidence of it.

Barry



Last edited by Barry Bordes; 03-23-2016 at 07:26 AM..
Barry Bordes is offline  
Old 03-19-2016, 06:49 PM   #26
Barry Bordes
Rotary Fanatic
 
Barry Bordes's Avatar
 
Join Date: Feb 2008
Location: Slidell, LA
iTrader: (0)
Posts: 191
Rep Power: 17
Barry Bordes is on a distinguished road
Default

Quote:
Originally Posted by ninesixtwo View Post
Aiming for a certain peak chamber pressure vs a given crank angle is fine in theory as most people don't have access to in-cylinder pressure monitoring so its kind of a moot point. In practice, OEM level calibration involves monitoring the crank angle at which 50% of the combustion charge has been consumed. The optimal point for CA50 has a 2-3 degree range for any engine, whereas peak cylinder pressure can be deemed "optimal" for a range more than twice that.
ninesixtwo,
Actually that is the approach that I have been working on. The TFX program also does Fraction Burn and Combustion Rate.
Anything that we can do to increase burn rate is beneficial....

One thing that can be done without internal mods (hint) for instance would be experimenting with ignition split and it's effect on burn rate.
The saw tooth angle of burning gases and the fraction burn shown below have been used to make definite increases.
Barry

Barry Bordes is offline  
Old 03-19-2016, 08:26 PM   #27
Barry Bordes
Rotary Fanatic
 
Barry Bordes's Avatar
 
Join Date: Feb 2008
Location: Slidell, LA
iTrader: (0)
Posts: 191
Rep Power: 17
Barry Bordes is on a distinguished road
Default

Quote:
Originally Posted by TitaniumTT View Post
Barry, could you elaborate on #4
Brian,
This screenshot is a little hard to make out but it shows that the closer to 45 degrees (in the 5000 to 8000 rpm range) the more peak pressure is made.
Notice that each ignition event is different and that the best pressure point can be determined comparing pressure to degrees for peak.

Location is the on the bottom chart and in this example we would add degrees of advance as noted then retest.

Barry

Barry Bordes is offline  
Old 03-21-2016, 05:10 PM   #28
chibikougan
⊙⊙
 
chibikougan's Avatar
 
Join Date: Dec 2009
Location: Great Falls
iTrader: (4)
Posts: 1,258
Rep Power: 16
chibikougan will become famous soon enough
Default

Happy Bday the other day Barry.
__________________
Quote:
You are not a beautiful and unique snowflake.
You are the same decaying organic matter as everyone else,
and we are all a part of the same compost pile.
chibikougan is offline  
Old 03-23-2016, 06:04 AM   #29
Slides
Rotary Fan in Training
 
Join Date: Apr 2012
Location: NSW, Australia
iTrader: (0)
Posts: 39
Rep Power: 0
Slides is on a distinguished road
Default

I'm a bit sceptical about side seal vibration causing apex seal failure, the pressure differential across the long sides combined with deposits would mean a massive frictional force to overcome sliding back and forth in the side seal grooves, with a minuscule area at each end to provide motive force via gas pressures and very small distance for the seal to build up momentum.

Thanks for your continued input Barry.

Edit: couldn't let this go, and wanted to give a basic explanation for those playing at home.

The only way motion of a rotor could push/turn a side seal "backwards" (remembering that the oil seals have directional springs as well) was if you had entirely different e-shaft/seal/rotor design (leaving large dead zones on the sides of the rotors) which allowed the side/corner seals on one side of the rotor to be inside the tooth contact radius of the rotor gear. Not practical or desirable.

You can see this simply for yourself by drawing a rotor and stat gear and taking a radius from the point of tooth contact (the stationary point and centre of motion at any time) to anywhere on the rotor, only points lying inside the rotor gear can have a back/forth motion relative to the side plate (through an engine cycle). Even then it would only present a problem if the majority of an independently moving seal part was inside an arc of radius equal to teh gear radius from the tooth contact. That is you could have an engine design with circular oil control seals inside the rotor gear radius (on the off-gear side of the rotor) with the same directional spring design as ours without a problem.

Last edited by Slides; 03-23-2016 at 09:46 AM..
Slides is offline  
Old 03-24-2016, 10:46 AM   #30
Barry Bordes
Rotary Fanatic
 
Barry Bordes's Avatar
 
Join Date: Feb 2008
Location: Slidell, LA
iTrader: (0)
Posts: 191
Rep Power: 17
Barry Bordes is on a distinguished road
Default

Quote:
Originally Posted by Barry Bordes View Post
ninesixtwo,
Actually that is the approach that I have been working on. The TFX program also does Fraction Burn and Combustion Rate.
Anything that we can do to increase burn rate is beneficial....

One thing that can be done without internal mods (hint) for instance would be experimenting with ignition split and it's effect on burn rate.
The saw tooth angle of burning gases and the fraction burn shown below have been used to make definite increases.
Barry


Compare the above Fraction Burn and Combustion Rate rate to the result achieved in this much later experiment.
You can see the dates of each test in the top left corner.
This total increase happens by many very slight incremental improvements.
Barry



Barry Bordes is offline  
Closed Thread

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 02:11 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Hosted by www.GotPlacement.com
Ad Management by RedTyger