Whizbang's GSLSE - Page 6

chibikougan · 01-06-2014, 10:58 PM

Cold Weber?

Whizbang · 01-06-2014, 11:04 PM

no its making the tach jumpy

2gslse · 01-07-2014, 07:59 AM

Quote:

Originally Posted by Whizbang

no its making the tach jumpy

maybe the pick-up is failing in the dizzy they move a little and the wire may be broken inside.

t_g_farrell · 01-07-2014, 08:22 AM

Take the tach signal from the msd if you can and see if it works fine.

Is it just the tach or do you feel it actually missing?

Whizbang · 01-07-2014, 11:40 AM

Quote:

Originally Posted by t_g_farrell

Take the tach signal from the msd if you can and see if it works fine.

Is it just the tach or do you feel it actually missing?

Im going to try the tach off the MSD as well. I yea, I actually feel it missing. Stumbling quite badly when it occurs.

Whizbang · 01-07-2014, 11:49 AM

Quote:

Originally Posted by 2gslse

maybe the pick-up is failing in the dizzy they move a little and the wire may be broken inside.

i have some spare dizzys so ill be changing it out too if the problems persist past the coil and ignitor.

Whizbang · 01-07-2014, 12:10 PM

Whizbang · 01-07-2014, 09:04 PM

dizzy failed mechanically. was making loud clunking noises, replaced and she runs good minus the idle circuit. I need to get that dialed in.

chibikougan · 01-07-2014, 09:30 PM

Sweet.

Whizbang · 01-21-2014, 01:17 AM

Whizbang · 01-21-2014, 01:21 AM

made this to break up the pressure waves

scarsofcarma · 01-25-2014, 10:15 PM

Whoa... what is that about? I'm very curious

Whizbang · 02-11-2014, 09:16 PM

Quote:

Originally Posted by scarsofcarma

Whoa... what is that about? I'm very curious

breaks up and/or deflects the pressure waves (supposedly) and prevents them from bouncing back against the flat top metal lid.

Whizbang · 02-11-2014, 09:18 PM

Found some larger 65 pump jets. Seems to have help some. Car still has off idle / light throttle leaning issues causing dead spots.

Racing beat muffler has replace the flowmaster so know it sounds better and quieter. A much needed thing.

The motor that controls the vent mode for the heat went out so i just removed it so i can manually change the settings. I might fix it proper some day. I just was tired of no defroster.

Also powersteering is back in the car with mazdatrix heim bumpsteer bits.

Whizbang · 02-16-2014, 03:09 PM

01-06-2014, 11:04 PM	#77
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 21	no its making the tach jumpy __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

01-07-2014, 08:22 AM	#79
t_g_farrell Waffles - hmmm good Join Date: Aug 2008 Location: Huntersville, NC Posts: 757 Rep Power: 0	Take the tach signal from the msd if you can and see if it works fine. Is it just the tach or do you feel it actually missing? __________________ 1980 GS stockport, Fat Nikki, RB Dual Facetfuel pumps, Holley regulator, RB Street port exhaust, 2GDFIS, MR2 MK I electric fans, 2G strut bar, relayed fans, lights and fuel pump, LEDs Project Fat Nikki Budget 12A rebuild Video setup < $30.00

01-07-2014, 12:10 PM	#82
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 21	__________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

01-07-2014, 09:04 PM	#83
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 21	dizzy failed mechanically. was making loud clunking noises, replaced and she runs good minus the idle circuit. I need to get that dialed in. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

01-21-2014, 01:17 AM	#85
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 21	__________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

01-21-2014, 01:21 AM	#86
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 21	made this to break up the pressure waves __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

01-25-2014, 10:15 PM	#87
scarsofcarma Rotary Fanatic Join Date: Aug 2013 Location: Antioch, Ca Posts: 101 Rep Power: 12	Whoa... what is that about? I'm very curious

02-11-2014, 09:18 PM	#89
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 21	Found some larger 65 pump jets. Seems to have help some. Car still has off idle / light throttle leaning issues causing dead spots. Racing beat muffler has replace the flowmaster so know it sounds better and quieter. A much needed thing. The motor that controls the vent mode for the heat went out so i just removed it so i can manually change the settings. I might fix it proper some day. I just was tired of no defroster. Also powersteering is back in the car with mazdatrix heim bumpsteer bits. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

02-16-2014, 03:09 PM	#90
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 21	__________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook