Middle TN - Thread - Page 229

djmtsu · 01-11-2017, 09:51 AM

We need to set some dates for DGRR hammer time for peeps who need to get their cars ready. Mine needs little, and I can do it myself.

I know Charles has a few that could use some extra eyeballs, and we need to get Kyle's FC going.

Who else??

FC Zach · 01-11-2017, 10:00 AM

Wash and go for me

project86 · 01-11-2017, 10:02 AM

Quote:

Originally Posted by djmtsu

We need to set some dates for DGRR hammer time for peeps who need to get their cars ready. Mine needs little, and I can do it myself.

I know Charles has a few that could use some extra eyeballs, and we need to get Kyle's FC going.

Who else??

Yeah... I'm hoping replacing the plugs will do the trick for mine. If not we'll probably need to have gathering in my garage and take the manifolds off again and make sure I didn't screw something up.

Also I need to figure out a good weekend to get to Charles's house to get my wheels cleaned up so I can get them mounted.

project86 · 01-11-2017, 10:07 AM

Also... I debating on bringing my car rig to DGRR for the possibility of getting some cool rollers of those of you in the group that might be interested in taking a quick drive out to somewhere for a couple photos. If there is interest and time I'll bring it. If not i'll leave it at home and we can just make time for each of you individually. I already have plans to shoot Zach's Celica, no hard date yet though.

Johnny_K · 01-11-2017, 10:47 AM

BB FD - need to install FFE Step Up kit, tune and tags. Doubt it will make it
MB FD - waiting on turbo kit. Need to install FFE Step Up kit, order FMIC, finish haltech wiring, tune and no telling what else. Doubt it will make it
VR FD - just needs an oil change, wash and interior cleaned
REPU - fix seat belt and dash light issue. Change all fluids.
Sheiba - just needs an oil change, wash and interior cleaned
RX8 - just needs an oil change, wash and interior cleaned

Maybe we will get some stuff done over the next couple of Sundays. Think Charles will be busy with photo stuff the next couple of Saturdays.

djmtsu · 01-11-2017, 11:08 AM

Quote:

Originally Posted by Johnny_K

BB FD - need to install FFE Step Up kit, tune and tags. Doubt it will make it
MB FD - waiting on turbo kit. Need to install FFE Step Up kit, order FMIC, finish haltech wiring, tune and no telling what else. Doubt it will make it
VR FD - just needs an oil change, wash and interior cleaned
REPU - fix seat belt and dash light issue. Change all fluids.
Sheiba - just needs an oil change, wash and interior cleaned
RX8 - just needs an oil change, wash and interior cleaned

Maybe we will get some stuff done over the next couple of Sundays. Think Charles will be busy with photo stuff the next couple of Saturdays.

First world problems.

Old school will prevail.

Johnny_K · 01-11-2017, 11:16 AM

ha.

We did move the yellow wagon to Parks over the weekend. Hopefully he makes some progress on it.

almoststockfc · 01-11-2017, 11:45 AM

^ Wait.. what? I thought it was adler/charlz

Johnny_K · 01-11-2017, 11:55 AM

not sure what they decided on but Park had room for it at his house and wanted to work on it so we took it there.

Not sure if Charles still has part ownership on the yellow one but he has a white one.

project86 · 01-12-2017, 10:07 AM

replaced plugs and wires last night... still no dice... it helped some of the issue but something is still going on

Johnny_K · 01-16-2017, 09:19 AM

Got the day off and will probably be out and about in the grocery getter

djmtsu · 01-16-2017, 09:27 AM

Those wheels are so terrible.

Johnny_K · 01-16-2017, 09:38 AM

ha, yea they dont really go with the truck.

Johnny_K · 01-18-2017, 10:19 AM

What's next on your car DJ?

djmtsu · 01-18-2017, 10:21 AM

Front suspension 'clunk', e-fan install, re-wire power source for gauges.

Then it needs to go to Chalz to do a little welding and paint.

01-11-2017, 09:51 AM	#1
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	We need to set some dates for DGRR hammer time for peeps who need to get their cars ready. Mine needs little, and I can do it myself. I know Charles has a few that could use some extra eyeballs, and we need to get Kyle's FC going. Who else?? __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

01-11-2017, 10:00 AM	#2
FC Zach RCC Loves Me Not You Join Date: Mar 2008 Location: Eagleville, TN Posts: 2,267 Rep Power: 20	Wash and go for me __________________ 1993 Yamaha GTS1000 1992 Celica Turbo AllTrac 1987 RX7 Sport 1979 Yamaha G1, KM24 powered 1975 Dolmar KMS4

01-11-2017, 10:07 AM	#4
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN Posts: 1,377 Rep Power: 18	Also... I debating on bringing my car rig to DGRR for the possibility of getting some cool rollers of those of you in the group that might be interested in taking a quick drive out to somewhere for a couple photos. If there is interest and time I'll bring it. If not i'll leave it at home and we can just make time for each of you individually. I already have plans to shoot Zach's Celica, no hard date yet though. __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

01-11-2017, 11:45 AM	#8
almoststockfc ..... Join Date: Jan 2010 Location: Murfreesboro, TN Posts: 543 Rep Power: 16	^ Wait.. what? I thought it was adler/charlz __________________ -75 RE_W_PU - -76 Hercules W2000 - DGRR 2012 3rd place Old School -75 Hercules W2000 MSO - DGRR 2011 Peoples Choice - April 2011 Rotary of the Month -Rotary snowmobile powered go kart - DGRR 2012 Peoples Choice - RIP

01-12-2017, 10:07 AM	#10
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN Posts: 1,377 Rep Power: 18	replaced plugs and wires last night... still no dice... it helped some of the issue but something is still going on __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

01-11-2017, 10:47 AM	#5
Johnny_K Rotary Fanatic Join Date: Jun 2013 Posts: 225 Rep Power: 13	BB FD - need to install FFE Step Up kit, tune and tags. Doubt it will make it MB FD - waiting on turbo kit. Need to install FFE Step Up kit, order FMIC, finish haltech wiring, tune and no telling what else. Doubt it will make it VR FD - just needs an oil change, wash and interior cleaned REPU - fix seat belt and dash light issue. Change all fluids. Sheiba - just needs an oil change, wash and interior cleaned RX8 - just needs an oil change, wash and interior cleaned Maybe we will get some stuff done over the next couple of Sundays. Think Charles will be busy with photo stuff the next couple of Saturdays.

01-11-2017, 11:16 AM	#7
Johnny_K Rotary Fanatic Join Date: Jun 2013 Posts: 225 Rep Power: 13	ha. We did move the yellow wagon to Parks over the weekend. Hopefully he makes some progress on it.

01-11-2017, 11:55 AM	#9
Johnny_K Rotary Fanatic Join Date: Jun 2013 Posts: 225 Rep Power: 13	not sure what they decided on but Park had room for it at his house and wanted to work on it so we took it there. Not sure if Charles still has part ownership on the yellow one but he has a white one.

01-16-2017, 09:19 AM	#11
Johnny_K Rotary Fanatic Join Date: Jun 2013 Posts: 225 Rep Power: 13	Got the day off and will probably be out and about in the grocery getter

01-16-2017, 09:27 AM	#12
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	Those wheels are so terrible. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

01-16-2017, 09:38 AM	#13
Johnny_K Rotary Fanatic Join Date: Jun 2013 Posts: 225 Rep Power: 13	ha, yea they dont really go with the truck.

01-18-2017, 10:19 AM	#14
Johnny_K Rotary Fanatic Join Date: Jun 2013 Posts: 225 Rep Power: 13	What's next on your car DJ?

01-18-2017, 10:21 AM	#15
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	Front suspension 'clunk', e-fan install, re-wire power source for gauges. Then it needs to go to Chalz to do a little welding and paint. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5