Mitchocalypse build V2

Prodigy · 04-05-2013, 03:39 PM

Quote:

Originally Posted by Mitchocalypse

Welp.. the car is back home and looking better than ever

Course it won't be all back together for a while..
]
(i'll have you note the improved pictures

)

sounds like we might have to plan a work on it once you get the parts in...

Quote:

Originally Posted by Mitchocalypse

Nope.. and i wouldn't count on it aha. The person who did the job took a lot of pride in doing it properly.
There are a few dust specs that will we wet sanded and polished out, and there is a tiny clear coat run on the bottom of the spoiler. Thats pretty much all the flaws there are.
Even where some holes were filled, the turn signals on the front fenders, the antenna and wiper.. can't even tell they were there.

nice... looks awesome... I'm excited to see you around in it once its running

J.

Mitchocalypse · 04-05-2013, 05:18 PM

Fine. Pictures with an actual camera.

Interior is still pretty dirty cause I haven't cleaned it yet and probably won't for a while. I Epoxy'd the SHIT out of the inside of the breaky door handle and i will be shocked if it ever breaks. (Terrible oem design. wtf were they thinking? Also.. I require a RHD map pocket lid still.. if anyone just happens to have one lying around. Oh.. and the steering wheel needs to go..

gross dirty:

oh and one more for..

dat wiiiing

Mitchocalypse · 04-15-2013, 04:39 PM

took a few more baby steps today..

First I relocated the igniter to outside the engine bay behind the fender. Probably the cleanest "wire tuck" i've ever done too. Mad impressed with myself

although it was really really easy lol.

and the result:

mounted coils and plug wires...
not the cleanest thing in the engine but you can barely see them anyways when it's all said and done. I might relocate them to the frame rail later but this will last long enough:

and with the igniter gone, it made mounting the twin power pretty easy:

the flash makes the engine bay look dirtier than it is

maybe i should start studying for exam season..

LOLOLOLOL
jk

Mitchocalypse · 04-22-2013, 02:53 AM

Bit of an update..

Got the turbo last week. I'm sure most of you have seen a T04Z but just in case.. heres a piece of canadiana as a size reference

more TiAL:

and a mock up of the last of the aero.
fitment is A- but it really complete's the look. Not painted but they're black so it gives a good idea. There aren't any bolts holding it on so thats why the front is off.

04-05-2013, 05:18 PM	#2
Mitchocalypse Rotary Fanatic Join Date: Jun 2012 Location: Edmonton, AB Posts: 179 Rep Power: 14	Fine. Pictures with an actual camera. Interior is still pretty dirty cause I haven't cleaned it yet and probably won't for a while. I Epoxy'd the SHIT out of the inside of the breaky door handle and i will be shocked if it ever breaks. (Terrible oem design. wtf were they thinking? Also.. I require a RHD map pocket lid still.. if anyone just happens to have one lying around. Oh.. and the steering wheel needs to go.. gross dirty: oh and one more for.. dat wiiiing __________________ Last edited by Mitchocalypse; 04-05-2013 at 07:11 PM.

04-15-2013, 04:39 PM	#3
Mitchocalypse Rotary Fanatic Join Date: Jun 2012 Location: Edmonton, AB Posts: 179 Rep Power: 14	took a few more baby steps today.. First I relocated the igniter to outside the engine bay behind the fender. Probably the cleanest "wire tuck" i've ever done too. Mad impressed with myself although it was really really easy lol. and the result: mounted coils and plug wires... not the cleanest thing in the engine but you can barely see them anyways when it's all said and done. I might relocate them to the frame rail later but this will last long enough: and with the igniter gone, it made mounting the twin power pretty easy: the flash makes the engine bay look dirtier than it is maybe i should start studying for exam season.. LOLOLOLOL jk __________________ Last edited by Mitchocalypse; 04-15-2013 at 04:44 PM.

04-22-2013, 02:53 AM	#4
Mitchocalypse Rotary Fanatic Join Date: Jun 2012 Location: Edmonton, AB Posts: 179 Rep Power: 14	Bit of an update.. Got the turbo last week. I'm sure most of you have seen a T04Z but just in case.. heres a piece of canadiana as a size reference more TiAL: and a mock up of the last of the aero. fitment is A- but it really complete's the look. Not painted but they're black so it gives a good idea. There aren't any bolts holding it on so thats why the front is off. __________________