Anyone install a TII aero kit on a N/A car?

infernosg · 02-06-2013, 08:41 AM

Well I've confirmed half of the OEM clips requires are NLA from Mazda, which means I need to get creative. Would anyone who has a TII or a N/A with the side skirts care to post some close up pictures of the fit-up/alignment? I'm particularly interested in how the front piece is secured near the door and the rear piece is secured along the bottom of the door.

vrracing · 02-06-2013, 05:27 PM

We put Tii skirts on our 90 vert and used tape we got from an auto paint supply store and then used screws at the ends in the fenders. The vert didnt have any provisions for the clips along the sides. Everything has held up just fine.

infernosg · 02-07-2013, 09:01 AM

Quote:

Originally Posted by vrracing

We put Tii skirts on our 90 vert and used tape we got from an auto paint supply store and then used screws at the ends in the fenders. The vert didnt have any provisions for the clips along the sides. Everything has held up just fine.

Yeah, I'm pretty sure the tape you're referring to is the same as that JDriftM mentioned. I'm pretty sure I have some of the 1/2" variety around.

Do you still have this 'vert? If so, could you take some pictures of the fit up? I'm trying to line up the skirts myself and I'm having a hell of a time. The vertical pieces near the wheels aren't too bad but the horizontal piece under the day doesn't seem to want to sit flush to the body.

02-06-2013, 08:41 AM	#1
infernosg IT'S ALIVE! Join Date: Dec 2009 Location: Richmond, VA Posts: 811 Rep Power: 16	Well I've confirmed half of the OEM clips requires are NLA from Mazda, which means I need to get creative. Would anyone who has a TII or a N/A with the side skirts care to post some close up pictures of the fit-up/alignment? I'm particularly interested in how the front piece is secured near the door and the rear piece is secured along the bottom of the door. __________________ '86 Mazda RX-7 Base '79 Mazda RX-7 GS

02-06-2013, 05:27 PM	#2
vrracing Rotating Assembly Join Date: Oct 2008 Location: TX Posts: 102 Rep Power: 17	We put Tii skirts on our 90 vert and used tape we got from an auto paint supply store and then used screws at the ends in the fenders. The vert didnt have any provisions for the clips along the sides. Everything has held up just fine. __________________ 90 S5 Vert. JDM Tii with BNR Stage1 turbo. Pineapple Racing street port. Bonez cat-forward. Corksport cat-back with Vibrant UltraQuiet resonator. RTek 2 wZeitronix w/b. HKS EBC. Vis CF Tii hood. 3000GT wing. Ground Control coilover kit with KYB AGX shocks. Red and Black leather RX8 seats. Corksport Odura lip & bumper caps, OEM Tii skirts