One Of A Kind, Billet Specialtys FB Mariah Racing Mode 1 Widebody Rims. Ultra Rare!

joemaddox · 12-01-2010, 09:23 PM

These are a one of a kind rim. They were made for a specific build on my 83 Mariah Racing Mode 1 Widebody. It was built to be a exact fit for the kit. The lug pattern was designed for the car to run both sets axles mazda had made for it, the GS, GSL and GSLSE 4x110 and 4x114.3 lug patterns. They are 15.8.5 (ish) and i think the backspace is 4inch, tell me how to properly measure and i will!

These rims are in PERFECT condition, i have babied them for a long time and they are currently sitting in my closet so to not be affected by the weather. There is no rash and aside from them needing a bath and a polish they are perfect!

They have Dunlop G/T Qualifers, P225/55/R15 90S. They have about 80% tread on them, but are older tires, just been sitting in the closet for a while and never had much road use... So i can take them off if you want, but should be good for a DD if wanted.

I am asking 600.00 FIRM! These are one of a kind, fit to match and will NEVER be duplicated, in this i will sit on them forever if they dont sell.. One day i may just have another wide body and will run them again

MORE PICS ON REQUEST!!!

Please call or text 541-620-0438 for more info. Thanks -Joe

joemaddox · 12-04-2010, 06:16 PM

ok, so dropping price to 500.00... There is not another set of rims like this in the world!!!

joemaddox · 12-11-2010, 05:41 PM

Really... No one?

RotorDad · 12-12-2010, 12:46 PM

I think one of the problems is the style of wheel they are. Another issue may be the actual weight of these wheels. Also like you claim they were built for the Mariah mode 1, so unless you can find a mode 1 owner or someone interested in building a mode 1 these wheels are pretty much useless. Now I do have a question for you, what makes them one off wheels? Is it the bolt pattern, because the size is nothing special or is the backspacing for wheels from Billet Specialties. I remember the mini trucking guys & the domestic guys were fans of these type wheels.

joemaddox · 12-13-2010, 10:03 PM

because billet specialties only made this one set for these cars, trust me i have looked. So yeah between the width,size,brand,bolt pattern, and cut of the rim, they are a one of a kind. Since this one is the only one like it, and there are no others, that would make it a on of a kind. And it will also fit about any wide body kit, such as mariah racing, mazda motorsports, mazdatrix (mark 4, bla bla), Shoot those with any flares can use these rims to make it look better and fill it out. So its not for only one car (and i figures that would go without saying) it was just made for the width of the widebody kit from mariah....

SO THIS IS STILL A STEAL! And the weight is nothing, they are light as hell, for any serious buyer i will get the exact weight

RotorDad · 12-14-2010, 02:17 AM

Well good luck man, I'm sure you'll find them a new owner.

joemaddox · 12-16-2010, 06:12 PM

Also taking TRADES in 86-91 fc parts:
aluminum radiator,BNR stage 2-3 or maybe 4 turbo,FMIC kit, fd housings,irons,rotors(or a shortblock core)stainless turbo exhaust manifold,Power FC (i will toss cash on top), Rtek,blitz 03 rims, Rear cargo cover, digital logicons, ect....

joemaddox · 12-20-2010, 08:15 AM

christmas bump and LETTING THEM GO FOR 500.00 SHIPPED!!!!

Rotorypolo · 06-09-2011, 07:33 AM

still FS?

joemaddox · 09-08-2012, 11:33 AM

bump, for sale again...500$ firm

jhereg · 09-13-2012, 11:48 PM

I contacted you twice about these when i was going to go with my widebody project and you said they were sold. You get them back or were you just holding out on me!

joemaddox · 09-14-2012, 03:34 PM

lol I'm sorry they did go those times lol, first to Portland then to Chris then to a buddy in town then back to me a week ago lol.

joemaddox · 09-17-2012, 12:35 AM

still for sale, no holding, no payments. ready to sell!

450$!!!!!!!

fastrx7man · 12-01-2012, 12:18 AM

Still for sale?

12-04-2010, 06:16 PM	#2
joemaddox Hooked For Life! Join Date: Nov 2010 Location: Philomath OR (five blocks long!) iTrader: (4) Posts: 137 Rep Power: 15	ok, so dropping price to 500.00... There is not another set of rims like this in the world!!! __________________ s5 Infini RHD -RIP S6 Efini RHD RE, Custom Burnout -Build in progress Last edited by joemaddox; 12-04-2010 at 07:50 PM..

12-11-2010, 05:41 PM	#3
joemaddox Hooked For Life! Join Date: Nov 2010 Location: Philomath OR (five blocks long!) iTrader: (4) Posts: 137 Rep Power: 15	Really... No one? __________________ s5 Infini RHD -RIP S6 Efini RHD RE, Custom Burnout -Build in progress

12-12-2010, 12:46 PM	#4
RotorDad Big Ugly Join Date: Apr 2009 Location: Fredericksburg, Va iTrader: (1) Posts: 591 Rep Power: 16	I think one of the problems is the style of wheel they are. Another issue may be the actual weight of these wheels. Also like you claim they were built for the Mariah mode 1, so unless you can find a mode 1 owner or someone interested in building a mode 1 these wheels are pretty much useless. Now I do have a question for you, what makes them one off wheels? Is it the bolt pattern, because the size is nothing special or is the backspacing for wheels from Billet Specialties. I remember the mini trucking guys & the domestic guys were fans of these type wheels. __________________ *Boosted Big Body On 335's* PS3 ID: Rotordad 1986 Mazda RX7 GXL - Street ported 13BT, Haltech, 62mm, ect. 2006 MazdaSpeed 6 - Eagle, Wiseco, Cobb, ect.

12-13-2010, 10:03 PM	#5
joemaddox Hooked For Life! Join Date: Nov 2010 Location: Philomath OR (five blocks long!) iTrader: (4) Posts: 137 Rep Power: 15	because billet specialties only made this one set for these cars, trust me i have looked. So yeah between the width,size,brand,bolt pattern, and cut of the rim, they are a one of a kind. Since this one is the only one like it, and there are no others, that would make it a on of a kind. And it will also fit about any wide body kit, such as mariah racing, mazda motorsports, mazdatrix (mark 4, bla bla), Shoot those with any flares can use these rims to make it look better and fill it out. So its not for only one car (and i figures that would go without saying) it was just made for the width of the widebody kit from mariah.... SO THIS IS STILL A STEAL! And the weight is nothing, they are light as hell, for any serious buyer i will get the exact weight __________________ s5 Infini RHD -RIP S6 Efini RHD RE, Custom Burnout -Build in progress

12-14-2010, 02:17 AM	#6
RotorDad Big Ugly Join Date: Apr 2009 Location: Fredericksburg, Va iTrader: (1) Posts: 591 Rep Power: 16	Well good luck man, I'm sure you'll find them a new owner. __________________ *Boosted Big Body On 335's* PS3 ID: Rotordad 1986 Mazda RX7 GXL - Street ported 13BT, Haltech, 62mm, ect. 2006 MazdaSpeed 6 - Eagle, Wiseco, Cobb, ect.

12-16-2010, 06:12 PM	#7
joemaddox Hooked For Life! Join Date: Nov 2010 Location: Philomath OR (five blocks long!) iTrader: (4) Posts: 137 Rep Power: 15	Also taking TRADES in 86-91 fc parts: aluminum radiator,BNR stage 2-3 or maybe 4 turbo,FMIC kit, fd housings,irons,rotors(or a shortblock core)stainless turbo exhaust manifold,Power FC (i will toss cash on top), Rtek,blitz 03 rims, Rear cargo cover, digital logicons, ect.... __________________ s5 Infini RHD -RIP S6 Efini RHD RE, Custom Burnout -Build in progress

12-20-2010, 08:15 AM	#8
joemaddox Hooked For Life! Join Date: Nov 2010 Location: Philomath OR (five blocks long!) iTrader: (4) Posts: 137 Rep Power: 15	christmas bump and LETTING THEM GO FOR 500.00 SHIPPED!!!! __________________ s5 Infini RHD -RIP S6 Efini RHD RE, Custom Burnout -Build in progress

06-09-2011, 07:33 AM	#9
Rotorypolo Rotary Fanatic Join Date: Jul 2008 Location: ATL iTrader: (0) Posts: 116 Rep Power: 17	still FS? __________________ 1994 RX-7 PEP - (SOLD) 1993 RX-7 R1 - (under the knife) 1973 RX-3 13b 5 speed (DGRR 2011- 1st in class)

09-08-2012, 11:33 AM	#10
joemaddox Hooked For Life! Join Date: Nov 2010 Location: Philomath OR (five blocks long!) iTrader: (4) Posts: 137 Rep Power: 15	bump, for sale again...500$ firm __________________ s5 Infini RHD -RIP S6 Efini RHD RE, Custom Burnout -Build in progress

09-13-2012, 11:48 PM	#11
jhereg The Newbie Join Date: Sep 2010 iTrader: (1) Posts: 4 Rep Power: 0	I contacted you twice about these when i was going to go with my widebody project and you said they were sold. You get them back or were you just holding out on me!

09-14-2012, 03:34 PM	#12
joemaddox Hooked For Life! Join Date: Nov 2010 Location: Philomath OR (five blocks long!) iTrader: (4) Posts: 137 Rep Power: 15	lol I'm sorry they did go those times lol, first to Portland then to Chris then to a buddy in town then back to me a week ago lol. __________________ s5 Infini RHD -RIP S6 Efini RHD RE, Custom Burnout -Build in progress

09-17-2012, 12:35 AM	#13
joemaddox Hooked For Life! Join Date: Nov 2010 Location: Philomath OR (five blocks long!) iTrader: (4) Posts: 137 Rep Power: 15	still for sale, no holding, no payments. ready to sell! 450$!!!!!!! __________________ s5 Infini RHD -RIP S6 Efini RHD RE, Custom Burnout -Build in progress Last edited by joemaddox; 09-23-2012 at 03:05 PM..

12-01-2012, 12:18 AM	#14
fastrx7man The Newbie Join Date: Dec 2012 iTrader: (0) Posts: 1 Rep Power: 0	Still for sale?