Help me pick a wastegate

Mitchocalypse · 08-30-2012, 11:21 PM

I would like some input as to which wastegate would be better for my setup. I want it to be as reliable as possible but not overkill. I want to order everything ASAP so a quick response + reason would be all I'm looking for. (I really don't know how to pick a specific wastegate.)

Turbo would be the ZN Performance garrett T04Z, with a 1.00 turbine a/r.
Long runner tubular manifold that comes with the kit,
3.5 or 3 inch downpipe (I'm not entirely sure.)

Anyways, the kit normally comes with the synapse 50mm wastegate, however i much prefer TiAL over synapse so that leaves us with the MV-R (44mm) or the V60 (60mm).

My goal is to make 500whp on approx. 21 psi of boost. If you need more info, I will gladly provide it.

Thanks!

cewrx7r1 · 09-01-2012, 11:09 AM

I have a Tial 46mm and it is very good.
http://www.tialsport.com/prod_wg_pts.htm

moenler · 11-17-2012, 09:53 AM

JGS gates are very good also. My last FD had a JGS 500 and it was great quality and solved the boost control issues I had with with a Tial 44mm. It uses an o-ring design instead of a diaphragm design as well.

http://www.jgsturbo.com/wgpg.html

08-30-2012, 11:21 PM	#1
Mitchocalypse Rotary Fanatic Join Date: Jun 2012 Location: Edmonton, AB iTrader: (0) Posts: 179 Rep Power: 13	Help me pick a wastegate I would like some input as to which wastegate would be better for my setup. I want it to be as reliable as possible but not overkill. I want to order everything ASAP so a quick response + reason would be all I'm looking for. (I really don't know how to pick a specific wastegate.) Turbo would be the ZN Performance garrett T04Z, with a 1.00 turbine a/r. Long runner tubular manifold that comes with the kit, 3.5 or 3 inch downpipe (I'm not entirely sure.) Anyways, the kit normally comes with the synapse 50mm wastegate, however i much prefer TiAL over synapse so that leaves us with the MV-R (44mm) or the V60 (60mm). My goal is to make 500whp on approx. 21 psi of boost. If you need more info, I will gladly provide it. Thanks! __________________

09-01-2012, 11:09 AM	#2
cewrx7r1 The Judge Join Date: Feb 2008 iTrader: (0) Posts: 196 Rep Power: 17	I have a Tial 46mm and it is very good. http://www.tialsport.com/prod_wg_pts.htm

11-17-2012, 09:53 AM	#3
moenler The Newbie Join Date: Nov 2012 Location: South Jersey iTrader: (0) Posts: 1 Rep Power: 0	JGS gates are very good also. My last FD had a JGS 500 and it was great quality and solved the boost control issues I had with with a Tial 44mm. It uses an o-ring design instead of a diaphragm design as well. http://www.jgsturbo.com/wgpg.html