My '76 Rx-4 hardtop build.

Buggy · 08-02-2012, 06:20 PM

I haven't updated this in a while. I got the new axles in and took care of some loose ends like hooking up the parking brake cables and doing a tune up. The car was starting to run a little rough. I replaced the plugs with new platinum plugs and I tore the carb apart completely. I cleaned everything up and started over setting the idle and everything correctly. Got the car running almost perfect! I had no idea a bridgeport could run so smooth and be so streetable. I drove it at our annual Bruce County Rotary meet and it worked great! Having a few issues with the 4 speed though now so look forward to a 5 speed swap in the near future!

08-02-2012, 06:20 PM	#20
Buggy I've been Wankeled! Join Date: Apr 2010 Location: Mildmay, Ontario, Canada Posts: 260 Rep Power: 16	I haven't updated this in a while. I got the new axles in and took care of some loose ends like hooking up the parking brake cables and doing a tune up. The car was starting to run a little rough. I replaced the plugs with new platinum plugs and I tore the carb apart completely. I cleaned everything up and started over setting the idle and everything correctly. Got the car running almost perfect! I had no idea a bridgeport could run so smooth and be so streetable. I drove it at our annual Bruce County Rotary meet and it worked great! Having a few issues with the 4 speed though now so look forward to a 5 speed swap in the near future! __________________ 1976 Rx-4 hardtop. Half bridge 3B 13B, S5 NA rotors, Renesis e-shaft, stat gears, and bearings, balanced rotating assembly, RE dual weber 36 DCD's 203rwhp 137ft-lbs torque DGRR 2011 3rd place 1974 Rx-4 all original 27,000 miles 1988 Rx-7 TII 320rwhp. DGRR 2012 3rd place