GB OPEN for Rotary Extreme FC Vmount Kits

rotaryextreme · 09-18-2011, 09:00 PM

Finally!!!!

After 2 years in the making, Rotary extreme FC Vmount kits are finally for sale to the public.

You can also see everything on my website, it will be updated as people are added. You will need to refresh your browser to see the latest updates on my site:

FC GB page: http://www.rotaryextreme.com/fcvmountgb.html
You can also browse around on my site in the Fc section and see everything.

The GB is an introductory offer so when its done, its done. If you want the kit after that be prepared to pay list price.

yes the kit is 1k more then the competitors but with this kit you get everything you need for the conversion with guaranteed fitment and online instruction.

note: I will make online instructions prior to the kits being shipped. I need to make these when I get back in November. But I have plenty of photos in the RE FC interest thread on page 24 to give you an idea of what to expect.

Link here: http://www.rx7club.com/showthread.php?t=861583&page=24

After looking into the other ducting that I wanted to provide it was determined that the following are needed the most.

The following ducting is provided.

1. Left and Right side shields on the brackets supporting the rad and IC. This will isolate the air flow to stay in between the cores.

2. For the Monster vmount, A Shield from the frame under the plastic air guides will direct air to where the a/c condenser used to be to the bottom leading edge of the IC.

3. For the stock airbox vmount a shield will come with the kit to close the gap between the rad support and the front of the IC.

4. Small lip to scoop airflow up to the oil cooler, maybe 2 inch but it will be at a slight angle. i do not want it too steep or it will scrap everything.

Also what comes with the kits:

Polished IC and RAD.
polished IC pipes.
Kit comes with both versions of pipes from IC to greddy elbow for the track and monster vmount. ( the nice straight pipe for use without ps and the curved piping for use with ac and ps)
New ss lines for relocated oil cooler.
Flex-a-lite fan with adj. temp controller
4 ply silicone everything, (red, blue or black)
All hardware included.
silicone vacuum lines provided to relocate misc items
Morroso spark plug wire holders, you can choose where you want to put them.
T-Bolt clamps for IC and perforated worm drive clamp for rad. The rad clamps have raised teeth so the silicone will not get damaged.
All support and re-location brackets powder coated to whatever color you want.
Everything re-drilled and test fitted on my test jig. ( may need to message some holes a tad but everything will line up)
Basic ducting for IC and Rad and oil cooler.
Complete online instructions.

Notes:
Works with a/c and ps.
No cutting of the frame anywhere.
No permanent modification so your car can be returned to stock.
Complete kit, no need to buy anything.

Pricing:

Standard list prices:
1. Vmount for stock turbo and airbox = $2300
2. Track/Touge Vmount = $2300
3. Monster Vmount = $2400
4. FC hood dampers = $155
5. FC mini battery kit = $275
6. FC Greddy Elbow with and without injector hole = $100 (vmount buyers only get this price)

5 kits sold between the 3 types gets 200 off. Those of you with the additional 100 off can apply your extra 100 for being faithful to me for the past 2 years while other FC vmounts were comming out. Thats 300 off total. Or you can use your additional 100 off to get the free greddy elbow needed for the Track and Monster Vmount kits.

GB pricing:

FC - Vmount for stock turbo and airbox:
Vmount for stock turbo and airbox = $2100
faithful people $2000

FC - Vmount for Track / Time Attack / Touge:
Track Vmount = $2100
faithful people $2000

FC - Monster Vmount :
Monster Vmount = $2200
faithful people $2100

Additional options are the Mini Battery Kit (comes polished) and the FC hood dampers.

Greddy elbow is required for the Track and Monster vmount kits.

FC Hood dampers:
Normal List price:
FC hood dampers $155
5+ normal buyers = $140
7+ vmount buyers (vmount buyers only get this deal) = $130

FC Mini Battery Kit:
Normal List price:
Mini Battery kit $275
5+ normal buyers = $250
7+ vmount buyers (vmount buyers only get this deal)= $240

FC Greddy elbow:
Normal List price:
FC Greddy elbow $110
FC Greddy elbow with injector hole $110
vmount buyers (vmount buyers only get this deal)= $100

For the Vmounts, everything included except for turbo elbow to IC pipe. It comes with basic minimal ducting. It is your responsibility on the track and monster vmounts to get the I/C inlet pipe provided connected to your turbo.

NOTE:!!!!! I will need to know what color you want your steel brackets powder coated. Please go to
http://garageworkspowdercoating.com/ to decide.

Need 7 buyers (vmounts) for the following to work. Not all 7 have to be packages, just need 7 vmounts sold and anyone can have the package.

Package 1a and 1b: You buy a vmount kit and get the battery kit for 240 or the hood dampers for 130
Package 2: You buy all 3 items and the battery kit becomes 220 and the hood dampers are 120.

Package 1a

1. Vmount for stock turbo and airbox = $2100, battery = $240 total = $2340
faithful people $2240

2. Track/Touge Vmount = $2100, battery = $240 total = $2340
faithful people $2240

3. Monster Vmount = $2200, battery = $240 total = $2440
faithfull people $2340

Package 1b

1. Vmount for stock turbo and airbox = $2100, hood damper = $130 total = $2230
faithful people $2130

2. Track/Touge = $2100, hood damper = $130 total = $2230
faithful people $2130

3. Monster Vmount = $2200, hood damper = $130 total = $2330
faithful people $2230

Package 2

1. Vmount for stock turbo and airbox = $2100, battery = $220, hood damper = $120
total = $2440
faithful people $2340

2. Track/Touge Vmount = $2100, battery = $220, hood damper = $120
total = $2440
faithful people $2340

3. Monster Vmount = $2200, battery = $220, hood damper = $120
total = $2540
faithful people $2440

Other Components that go with the vmount: The FC mini battery kit is required for all 3 vmount kits but The Greddy elbow is required for the installation of the Track and Monster Vmount kits.

Again full payment is required to be on the list!!!

I know it seems kinda complicated, just email or call me for clarification.
rotary_extreme@hotmail.com
408 500 6199
Ben

rotaryextreme · 09-24-2011, 05:11 PM

Here is the list of "PAID" buyers

1. SpeedOfLife (rx7club): Track Vmount, RE hood dampers, all red silicone hoses, gloss black brackets and Greddy elbow without injector hole. (package 1b)

rotaryextreme · 11-06-2011, 05:28 AM

1. SpeedOfLife = PAID (1)
2. MaczPayne = still on (not paid)
3. eage8 = PAID (2)
4. Lexis King = partial sponsorship for his drift FC turbo vert
5. BurntOrangeT2 = still on (not paid)
6. SpeedyRotary = still on (not paid)
7. incubuseva = PAID (3)
8. wazway = PAID (4)

an update to who is getting the kit, is there anyone else interested from this site?

Ben

rotaryextreme · 11-11-2011, 12:35 PM

UPDATE:

1. SpeedOfLife = PAID (1)
2. MaczPayne = PAID *note* I will install the kit on this car and make online instructions for everyone to follow. So I guess MaczPayne will be first, we actually had this agreement for 1.6 years now.
3. eage8 = PAID (2)
4. Lexis King = partial sponsorship for his drift FC turbo vert = PAID *note* will be installed by me.
5. BurntOrangeT2 = still on (not paid)
6. SpeedyRotary = PAID (5)
7. incubuseva = PAID (3)
8. wazway = PAID(4)
9. Michael Connolly = PAID (6) *note* This kits going down under to Australia !!!!!

The numbers mean the order it was paid and the order it will be shipped.

Ben

rotaryextreme · 11-11-2011, 12:38 PM

Last call !!!!!!

Please holla back if you want in.

rotaryextreme · 11-12-2011, 02:01 PM

1. SpeedOfLife = PAID (1)
2. MaczPayne = PAID *note* I will install the kit on this car and make online instructions for everyone to follow. So I guess MaczPayne will be first, we actually had this agreement for 1.6 years now.
3. eage8 = PAID (2)
4. Lexis King = partial sponsorship for his drift FC turbo vert = PAID *note* will be installed by me.
5. BurntOrangeT2 = PAID (7)
6. SpeedyRotary = PAID (5)
7. incubuseva = PAID (3)
8. wazway = PAID(4)
9. Michael Connolly = PAID (6) *note* This kits going down under to Australia !!!!!

10. r0gu3 - PAID (for GB pricing on FC mini battery kit and for FC hood dampers only-no vm kit)
will ship as soon as parts are done.

The numbers mean the order it was paid and the order it will be shipped.

Group Buy is now CLOSED

Ben

WE3RX7 · 11-12-2011, 02:22 PM

Glad you got the buy-in you needed. Great looking kits!!

rotaryextreme · 11-16-2011, 03:33 AM

Quote:

Originally Posted by WE3RX7

Glad you got the buy-in you needed. Great looking kits!!

Thanks, Now I gotta make these things and then move onto a few FD stuff.

Ben

09-24-2011, 05:11 PM	#2
rotaryextreme i like spinners Join Date: Sep 2008 Location: Union City iTrader: (1) Posts: 250 Rep Power: 17	Here is the list of "PAID" buyers 1. SpeedOfLife (rx7club): Track Vmount, RE hood dampers, all red silicone hoses, gloss black brackets and Greddy elbow without injector hole. (package 1b) __________________ The ingenious and decidedly weird Wankel rotary engine works by using internal combustion to bounce a fat metal triangle around inside a hollow metal kidney bean, which hula-hoops around a central shaft to generate power.--- Jalopnik www.rotaryextreme.com, after more then a 2 year break, Rotary Extreme Re-opens 9/11/08.

11-06-2011, 05:28 AM	#3
rotaryextreme i like spinners Join Date: Sep 2008 Location: Union City iTrader: (1) Posts: 250 Rep Power: 17	1. SpeedOfLife = PAID (1) 2. MaczPayne = still on (not paid) 3. eage8 = PAID (2) 4. Lexis King = partial sponsorship for his drift FC turbo vert 5. BurntOrangeT2 = still on (not paid) 6. SpeedyRotary = still on (not paid) 7. incubuseva = PAID (3) 8. wazway = PAID (4) an update to who is getting the kit, is there anyone else interested from this site? Ben __________________ The ingenious and decidedly weird Wankel rotary engine works by using internal combustion to bounce a fat metal triangle around inside a hollow metal kidney bean, which hula-hoops around a central shaft to generate power.--- Jalopnik www.rotaryextreme.com, after more then a 2 year break, Rotary Extreme Re-opens 9/11/08.

11-11-2011, 12:35 PM	#4
rotaryextreme i like spinners Join Date: Sep 2008 Location: Union City iTrader: (1) Posts: 250 Rep Power: 17	UPDATE: 1. SpeedOfLife = PAID (1) 2. MaczPayne = PAID note I will install the kit on this car and make online instructions for everyone to follow. So I guess MaczPayne will be first, we actually had this agreement for 1.6 years now. 3. eage8 = PAID (2) 4. Lexis King = partial sponsorship for his drift FC turbo vert = PAID note will be installed by me. 5. BurntOrangeT2 = still on (not paid) 6. SpeedyRotary = PAID (5) 7. incubuseva = PAID (3) 8. wazway = PAID(4) 9. Michael Connolly = PAID (6) note This kits going down under to Australia !!!!! The numbers mean the order it was paid and the order it will be shipped. Ben __________________ The ingenious and decidedly weird Wankel rotary engine works by using internal combustion to bounce a fat metal triangle around inside a hollow metal kidney bean, which hula-hoops around a central shaft to generate power.--- Jalopnik www.rotaryextreme.com, after more then a 2 year break, Rotary Extreme Re-opens 9/11/08.

11-11-2011, 12:38 PM	#5
rotaryextreme i like spinners Join Date: Sep 2008 Location: Union City iTrader: (1) Posts: 250 Rep Power: 17	Last call !!!!!! Please holla back if you want in. __________________ The ingenious and decidedly weird Wankel rotary engine works by using internal combustion to bounce a fat metal triangle around inside a hollow metal kidney bean, which hula-hoops around a central shaft to generate power.--- Jalopnik www.rotaryextreme.com, after more then a 2 year break, Rotary Extreme Re-opens 9/11/08.

11-12-2011, 02:01 PM	#6
rotaryextreme i like spinners Join Date: Sep 2008 Location: Union City iTrader: (1) Posts: 250 Rep Power: 17	1. SpeedOfLife = PAID (1) 2. MaczPayne = PAID note I will install the kit on this car and make online instructions for everyone to follow. So I guess MaczPayne will be first, we actually had this agreement for 1.6 years now. 3. eage8 = PAID (2) 4. Lexis King = partial sponsorship for his drift FC turbo vert = PAID note will be installed by me. 5. BurntOrangeT2 = PAID (7) 6. SpeedyRotary = PAID (5) 7. incubuseva = PAID (3) 8. wazway = PAID(4) 9. Michael Connolly = PAID (6) note This kits going down under to Australia !!!!! 10. r0gu3 - PAID (for GB pricing on FC mini battery kit and for FC hood dampers only-no vm kit) will ship as soon as parts are done. The numbers mean the order it was paid and the order it will be shipped. Group Buy is now CLOSED Ben __________________ The ingenious and decidedly weird Wankel rotary engine works by using internal combustion to bounce a fat metal triangle around inside a hollow metal kidney bean, which hula-hoops around a central shaft to generate power.--- Jalopnik www.rotaryextreme.com, after more then a 2 year break, Rotary Extreme Re-opens 9/11/08.

11-12-2011, 02:22 PM	#7
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA iTrader: (1) Posts: 1,812 Rep Power: 18	Glad you got the buy-in you needed. Great looking kits!!