1993 Rx7 Roller. Feed widebody, Rear cage and many extras

GtoRx7 · 01-31-2011, 11:41 PM

Up for grabs is our 1993 Mazda Rx7. Priced at $6900,or $6700 w/o tranny. Clean title and very straight body. Wheels shown not included.

Aftermarket parts-

Feed (shine auto replicas) Front Fenders
Feed (authentic) Rear fender widebody
Feed (replica) Front headlight cover
Delrin bushings in Differental
Delring bushings in all of front suspension
Delrin bushings in upper rear arms
6 point custom rear main hoop/cage. Built by Defined Autoworks, TIG welded. 1.125" wall thickness 1.5" tubing. Legal for Scca and Nasa racing, or drag racing
Carbon fiber hood (clear coat starting to fade)

OEM parts with the chassis-

Full rear end, half shafts, spindels
Power plant frame
All suspension arms
Brakes and calipers
OEM R1 shocks/springs
Taillights, headlights side markers etc
Power steering rack, power steering pump
All oem chassis wiring
Dash with gauge hood
Brake/clutch master
hang pedals
gas tank and sending unit

Parts needed to make a runing car-

Complete longblock engine
Engine harness and ecu
Transmission
Radiator
Oil cooler (might have a stock one)
Driver/passenger seat
Seatbelts
Fuel pump
Steering wheel (I think we have the OEM one)

~PICS~

01-31-2011, 11:41 PM	#1
GtoRx7 Rotary Fanatic Join Date: Jul 2008 iTrader: (0) Posts: 151 Rep Power: 17	1993 Rx7 Roller. Feed widebody, Rear cage and many extras Up for grabs is our 1993 Mazda Rx7. Priced at $6900,or $6700 w/o tranny. Clean title and very straight body. Wheels shown not included. Aftermarket parts- Feed (shine auto replicas) Front Fenders Feed (authentic) Rear fender widebody Feed (replica) Front headlight cover Delrin bushings in Differental Delring bushings in all of front suspension Delrin bushings in upper rear arms 6 point custom rear main hoop/cage. Built by Defined Autoworks, TIG welded. 1.125" wall thickness 1.5" tubing. Legal for Scca and Nasa racing, or drag racing Carbon fiber hood (clear coat starting to fade) OEM parts with the chassis- Full rear end, half shafts, spindels Power plant frame All suspension arms Brakes and calipers OEM R1 shocks/springs Taillights, headlights side markers etc Power steering rack, power steering pump All oem chassis wiring Dash with gauge hood Brake/clutch master hang pedals gas tank and sending unit Parts needed to make a runing car- Complete longblock engine Engine harness and ecu Transmission Radiator Oil cooler (might have a stock one) Driver/passenger seat Seatbelts Fuel pump Steering wheel (I think we have the OEM one) ~PICS~ __________________ DEFINED AUTOWORKS Where concept meets results Black 1994 FD 4-rotor 610rwhp all motor Red 1970 Mazda R-100 with 10a Black 1974 Mazda Rx4 Black 1984 Gsl-SE 13b-re streetport 230rwhp