Interior Door Panel Repair Thread - Page 2

speedjunkie · 11-04-2010, 08:23 PM

Everything I've ever used JB Weld on I've never had a problem with again. I love the stuff.

Sideo · 02-14-2011, 12:52 AM

great thread, this is the reason i joined rcc

the spyder · 02-26-2011, 11:24 PM

Most of the broken passenger door handles I repair end up being reinforced with 1/4" steel rod, welded to the top and bottom mounting points on the chassis (where it screws in from the factory). The handle is then centered and filled with a high strength epoxy and allowed to cure for 48 hours. Never had one come back in 4 years.

prrex4ever · 03-02-2011, 10:58 PM

Great write up, thanks. I know that this will come in handy sooner or later lol.

11-04-2010, 08:23 PM	#1
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 2,089 Rep Power: 20	Everything I've ever used JB Weld on I've never had a problem with again. I love the stuff.

02-14-2011, 12:52 AM	#2
Sideo The Newbie Join Date: Oct 2010 Posts: 20 Rep Power: 0	great thread, this is the reason i joined rcc

02-26-2011, 11:24 PM	#3
the spyder Rotary Fan in Training Join Date: Jun 2008 Posts: 38 Rep Power: 0	Most of the broken passenger door handles I repair end up being reinforced with 1/4" steel rod, welded to the top and bottom mounting points on the chassis (where it screws in from the factory). The handle is then centered and filled with a high strength epoxy and allowed to cure for 48 hours. Never had one come back in 4 years.

03-02-2011, 10:58 PM	#4
prrex4ever Rotary Fanatic Join Date: Oct 2008 Posts: 274 Rep Power: 18	Great write up, thanks. I know that this will come in handy sooner or later lol.